Machineryvalues.com

Home > Manual Lathes > Engine Lathes >   20" Swing 40" Centers Bridgeport-Romi EZ PATH II CNC LATHE, DX32 Control,Constant Surface Speed,, 3-Jaw
Click Here to See More Photos	CALL FOR PRICING Phone: 973-497-7570 Stock Status: (Out of Stock) Availability: Usually Ships in 24 to 48 Hours Product Code: 144569

Description   20" X 40" BRIDGEPORT TWO-AXIS CNC/MANUAL FLAT BED LATHE, MODEL: EZ-PATH II, S/N: 016001478-349  NEW 1995 SPECIFICATIONS: MAXIMUM SWING OVER BED ................. 19.7" MAXIMUM SWING OVER CROSS SLIDE ......... 9.8" MAXIMUM DISTANCE BETWEEN CENTERS ....... 40" CROSS SLIDE TRAVEL (X) ................. 10.04" LONGITUDINAL TRAVEL (Z) ................ 40" SPINDLE NOSE ........................... D1-8" CAMLOCK SPINDLE BORE ........................... 2.56" SPINDLE SPEED RANGE,     INF VAR IN THREE GEARED RANGES ... 4 TO 3,500 RPM TAILSTOCK QUILL TRAVEL ................. 4.63" TAILSTOCK QUILL DIAMETER ............... 2.25" QUILL TAPER HOLE ....................... #4 MORSE APPROXIMATE WEIGHT ..................... 5,000 LBS. APPROXIMATE FLOOR SPACE ................ 59" x 94" EQUIPPED WITH: - BRIDGEPORT 'EZ-PATH' PC BASED, TWO-AXIS CNC CONTROL WITH 9" CRT, 32 BIT PROCESSOR, 120 MB HARD DRIVE, 3-1/2 INCH FLOPPY DRIVE, AND RS-232 PORT - CAPABILITY TO TURN PARTS MANUALLY OR AUTOMATICALLY - CAPABILITY TO "TEACH" FIRST PART AND THEN RUN REMAINING PARTS AUTOMATICALLY - HARDENED AND GROUND WAY SURFACES - TURCITE SADDLE AND CROSS SLIDE SURFACES - CONSTANT SURFACE SPEED - DUAL INCH OR METRIC THREADING - DUAL ELECTRONIC HANDWHEELS - 10" 3-JAW CHUCK - BACKPLATE - JACOBS DRILL CHUCK FOR TAILSTOCK - WORK LIGHT - COOLANT SYSTEM AND CHIP PAN - REAR SPLASH GUARDING & OPERATOR SAFETY DOOR WITH WINDOW - AUTOMATIC CENTRAL LUBRICATION - 10 HORSE POWER AC SPINDLE DRIVE MOTOR INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION:    ****  SUPERB  ****

Related Products... 55" Engine Lathe, Tru-Turn Cw62140D/5000 39" Engine Lathe, Poreba Tr100 B1/5M Inch/Metric,T LeBlond NR ENGINE LATHE 16.5" Engine Lathe, Monarch Waa Our Price: $3,950.00 Monarch ENGINE LATHE

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Manual Lathes > Engine Lathes New or Used > Used Machinery Availability > Out of Stock Manual Lathes New or Used

	Fanuc 0M CIRCUIT BOARD CNC PARTS, A16B-1600-0440 $300.00
	6" Y Axis 8" X Axis Eltee TR20 RAM-TYPE EDM, EP30 POWER SUPPLY, SYSTEM 3R CHUCH & ACTUATOR $99,999.00 -->