 |
 |
 |
|
"NEW" MR. DEBURR Vibratory Deburring & Finishing Machine
MODEL: 600DB
DESCRIPTION & SPECIFICATIONS:
CAPACITY:
6 cu. ft. tank. Maximum Part Length 34"
MOTOR:
3 H.P., 3 Phase, 208/230 Volts, F.L. amps 8.8, or 460 Volts
at 4.4. F.L. Amps (Also Available in Single Phase)
LINING:
All cast polyurethane, 90 durometer 5/8" in thickness.
OVERALL DIMENSIONS:
Height 44", Width 48" Max.,Depth 26".
INSIDE TANK DIMENSIONS:
Length 35", Depth 18 3/4" Width 18"
CONSTRUCTION:
Heavy gauge steel throughout, all welded construction. All
welds performed by certified welders.
FINISH:
High quality, rust prohibiting alkyd enamel gloss beige in
color.
DISCHARGE DOOR:
5" diameter opening. Door held in place with positive
ocking device.
DISCHARGE RAMP:
22" from floor
FLUID SYSTEM:
Intake - 1/4" threaded pipe, drain 2 1/2" pipe. Easy hook-
up to existing mixing valves and drain or/inexpensive
recycling system available from your dealer.
MEDIA: Requires 400 pounds of ceramic media or 265 pounds
of plastic media to fill machine.
WEIGHT:
650 lbs. (empty)
Mr DeBurr replaces expensive hand deburring with
inexpensive automated finishing. Mr. DeBurr can de-burr,
de-grease, clean and polish. It can be used for aggressive
cutting or fine polishing. With proper selection of
compound and media a limitless variety of finishes can be
produced. (Steel media not recommended).
Whether you are manufacturing parts from steel, alloys,
plastics, ceramic or wood, Mr DeBurr will save you valuable
man-hours. Mr De Burr has been designed with the small
shop in mind, allowing you to own professional finishing
equipment at an affordable price. At the same time, our
machine is suitable for large production shops.
|
|
|
|
|
|
|
|
|
