Used Machinery and New Industrial Metalworking Machines

Search

Service

Click Here to Inquire About Buying or Selling a Machine

You are here: Home > New or Used

Choose a sub category:

New Machinery

Used Machinery

Sort By:

Page of 352

14" Blade 3 HP Scotchman CPO 350 COLD SAW, 2 Speed

Our Price: $5,395.00

MODEL CPO-350 2-SPEED COLD SAW
STANDARD FEATURES
Manual Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
Miter Locking Device Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
Capable of Slotting
Two Cutting Speeds: 22 & 44 RPM
Double Reduction, Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
7 Gallon Coolant Tank with Pump
30" Material Length Stop
One 12-1/2" Diameter (315 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt/3 Phase Electrics (must specify voltage)
Warranty: One Year Parts
Made in USA

Capacities & Specifications

Cutting Speeds LT (Low Turn) designed for solid mild steel, solid
stainless steel & thick wall pipe (Must specify when ordering):
LT (Low Turn) 22 RPM or 44 RPM
Motor Rate: 3 hp
Factory Wired (Specify): 208 3 ph - 230 3 ph - 460 4 ph - 575 volt 3 ph 60 hz

TUBING 90 DEGREES:
Round: 4-7/8"
Square: 4-1/2" x 4-1/2"
Rectangle: 5-1/2" x 4"

TUBING 45 DEGREES:
Round: 4-3/8"
Square: 4" x 4"
Rectangle: 4" x 4"

SOLID 90 DEGREES:
Round: 2"
Square: 2" x 2"

SOLID 45 DEGREES:
Round: 1-3/4"
Square: 1-3/4" x 1-3/4"

Max Dia Blade: 14"
Arbor Bore: 1-9/16"
Pin Spacing: 4/12/64
Width: 21-7/8"
Depth: 43-1/2"
Height Not Including Handle: 56-1/4"
Height From Floor To Vise: 37-7/16"
Shipping Weight: 675 lbs.

49" Table 3HP Spindle Birmingham BPV-3949 Vari-Speed Head VERTICAL MILL, 3 HP 220/440/3/60

Our Price: $7,150.00

New "Birmingham" Knee Type Milling Machine
Model: BPV-3949

Made in Taiwan
9" x 49" Hardened and ground table and T slots
3 HP (3 phase)
Infinitely variable spindle speeds
Class 7 spindle bearings
Dovetail ways
Turcite B on ways for smooth movement
Dual saddle locks and dual knee locks
Large easy to read chrome satin dials
Distance from spindle nose to table surface - 2-18"
Distance from spindle center to column surface - 6-3/4 - 18-3/4"
Spindle speeds 60-4300 RPM
Spindle taper - R-8
Quill dia. - 3-3/8"
Spindle motor, 3 HP - 3 phase 220 or 440 Volt
Net weight - 2,400 lbs.

Standard Accessories:
Hardened & ground ways (X & Y)
Chromed quill-honed head
Drawbar/service wrench
Hardened & ground table
Coolant sump in column
Coolant drain in base
Front & rear chip guard
One-shot lubrication
Double knee locks-ratchet style
Chromed turn-in-the hand handles
Operation/service manual
MEEHANITE CASTINGS

20" Swing 80" Centers Birmingham DLC-2080 Special Deal ENGINE LATHE, 10 HP, 16 Speed, 4-1/8" Spindle Bore

Our Price: $14,750.00

New "Birmingham" Precision High Speed Engine Lathe
Model: DLC-2080 w/Removable Gap Block
Note: the photo shows the 26" x 80" centers model
Special deal includes Free Delivery to all the lower 48
States and a Free Taper Attachment (installed)

10 HP motor delivers power thru all spindle speeds
Spindle gears, shafts and bearings are lubricated by pumped bath of oil
Induction hardened and ground bedways
D1-8 Camlock spindle with 4-1/8" spindle bore
16 Spindle speeds, 26 - 1,700 RPM
Rapid power traverse to carriage and cross slide
Multiple disc clutch for efficient spindle starting and reversing
Equipped with leadscrew cover

SPECIFICATIONS:
Swing over bed: 20"
Swing over cross slide: 11-3/8"
Swing over gap: 30"
Length of gap: 10"
Distance between centers: 80"
Spindle Bore: 4-1/8"
Spindle nose type (Camlock): D1-8
Spindle taper: MT-6
Spindle speeds: 16
Spindle speed range: 26 - 1,700 RPM
Spindle center to bedway: 9-3/4"
Threads per inch (No.) range (TPI): (42) 7/16 - 80
Metric threads (No.) range (mm): (37) 0.5 - 80
Module threads (No.) range (mm): (32) 0.25 - 40
Diametral threads (No.) range (DP): (42) 7/8 - 160
Long. feeds (No.) range (in/rev): (45) 0.0017 - 0.058
Cross feeds (No.) range (in/rev): (45) 0.0009 - 0.029
Leadscrew diameter (in): 1-9/16"
Leadscrew TPI: 2
Feed rod diamter: 1" Hex
Tooling size: 1" x 1"
Compound slide travel: 5-7/8"
Cross slide travel: 13-3/4"
Tailstock taper: MT-5
Quill travel: 6"
Quill diameter: 3"
Main drive: 10 hp, 220/440V 3 ph
Maximum workpiece weight: 1,100 lbs.
New Weight Approx: 5090 Lbs.

Standard Equipment:
12" 3 Jaw Chuck with reversible jaws
16" 4-Jaw Chuck
19" Face plate
10" Back plate
Steady rest capacity 1-1/8 - 7-7/8"
Follow rest capacity 3/4" - 4"
Dead centers, MT-4
Center sleeve, MT-6 to MT-4
Foot Brake
Threading Dial
Coolant System w/Full Length Splash Guard
Halogen work lamp
Leveling pads
Toolbox with tools

Optional Equipment (call for pricing):
Taper attachment
12" Cap. Larger steady rest with roller jaws
5C Hand lever type collet closer "JFK" USA
Quick Change tool post set
DRO - Newall or Acu-Rite

4.33" Spindle 118" X Axis Champion 110HB-T3000 HORIZONTAL BORING MILL, Fanuc 18iM, T-Type Construction

Brand New Champion Model 110HB-T3000
CNC T-Type Horizontal Boring Mill

Standard features:
Fanuc 18i (Siemens 840D) CNC Control
T-shaped bed design - with this style machine, the table
  is always traveling on the bed, this arrangement
  provides extremely high rigidity and accuracy.
The spindle is equipped with an automatic tool unloading
  device.
Extra wide hardened and ground steel box-ways,
The saddle surfaces are lined with a low-friction
  plastic, and the side faces are equipped with
  linear rolling blocks providing extremely low
  friction and high positioning accuracy.
AC motors and THK ball-screws are used on all linear axes.
Double-worm gear construction is provided for the
  B axis (rotary table) to eliminate any backlash.
The rotary table is equipped with encoder feedback.

SPECIFICATIONS:
SPINDLE DIAMETER .............................. 4.3"
SPINDLE SPEEDS (MAX.) ....................... 2500 RPM
SPINDLE TAPER .................................... ISO#50 TAPER
SPINDLE MOTOR ................................... 30 HP
SPINDLE TRAVEL (W-AXIS) .................... 21.6"
TABLE CROSS TRAVEL (X-AXIS) ............. 118"
VERTICAL TRAVEL OF SPINDLE (Y-AXIS). 59"
COLUMN TRAVEL IN & OUT (Z-AXIS) ...... 47.2"
TABLE SIZE (BUILT-IN ROTARY) ............ 55" X 49"
4th AXIS ROTARY TABLE POSITIONING . 360,000 Positions
TABLE LOAD CAPACITY ........................ 11,000 LBS.
TABLE FEED ROTATIONAL FEED RATE ... 0-1.5 RPM
TABLE RAPID TRAVEL RATE ................... 2.5 RPM
FEED RATE ........................................... 0.04 - 236.4 IPM
RAPID TRAVERSE RATE ......................... 354 IPM  (X, Y & Z)
POSITIONING ACCURACY ...................... .0003" (X, Y & Z)
POSITIONING REPEATABILITY ............... .00019" (X, Y & Z)
ROTATIONAL ACCURACY & REPEATABILITY ... + or - 2 sec.
MACHINE FLOOR SPACE ........................ 219" X 164" X 161h"
APPROXIMATE MACHINE WEIGHT .......... 43,650 LBS.

EQUIPPED WITH:
- FANUC 18i CNC CONTROL
- RIGID TAPPING
- FACTORY TECHNICIAN FOR INSTALLATION AND TRAINING
- LEVELING PADS AND FOUNDATION BOLTS

IN STOCK FOR IMMEDIATE DELIVERY

20" Swing 60" Centers Romi M20 CNC LATHE, Fanuc 21 iT Control,3-Jaw Chuck,Dorian Toolpost

20" X 60" ROMI CNC COMBINATION LATHE
MODEL: M20, S/N: 002-084880-404, NEW: 2000
SPECIFICATIONS:
DISTANCE BETWEEN CENTERS..................... 60"
SWING OVER BED............................... 20.47"
SWING OVER CROSS SLIDE....................... 10.24"
CROSS SLIDE (X) TRAVEL....................... 11.02"
BED WIDTH.................................... 13.39"
SPINDLE NOSE................................. A2-8 ASA
HOLE THROUGH SPINDLE......................... 3.15"
RANGE OF SPINDLE SPEEDS (INF VARIABLE)....... 2 - 2,200 RPM
RAPID TRAVERSE (Z)........................... 394 IPM
RAPID TRAVERSE (X)........................... 295 IPM
TAILSOCK QUILL TRAVEL........................ 5.12"
QUILL DIAMETER............................... 3.15"
QUILL TAPER HOLE............................. 4MT
MAIN MOTOR................................... 15 HP
WEIGHT....................................... 7,750 LBS
APPROXIMATE FLOOR SPACE ..................... 144"L x 65"W

EQUIPPED WITH:
  - GE-FANUC 21i-T CONTROL w/MANAUL GUIDANCE SOFTWARE, TOOL
  PATH & 3D PART SHAPE GRAPHICS, TEACH MODE, CONVERSATIONAL
  PROGRAMMING, G CODE PROGRAMMING, BUILT-IN DRO
  - 15 HP GE-FANUC "P" TYPE VARIABLE SPEED SPINDLE DRIVE
  - TURN PARTS MANUALLY OR AUTOMATICALLY
  - DUAL ELECTRONIC HANDWHEEL CONTROLS
  - "TEACH" 1ST PART, RUN REMAINING PARTS AUTOMATICALLY
  - FLASH MEMORY CARD SLOT & RS 232 PORT
  - 10.4" COLOR LCD DISPLAY
  - RIGID TAPPING
  - CONSTANT SURFACE SPEED
  - INCH/METRIC CONVERSION
  - MULTI-START THREADING, THREAD REPAIR
  - DORIAN QUICK CHANGE TOOLPOST & HOLDERS
  - 12" 3-JAW CHUCK
  - COOLANT SYSTEM
  - AUTOMATIC LUBRICATION SYSTEM

INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE

CONDITION:    ****   SUPERB   ****

20" Swing 60" Centers Bridgeport EZ PATH II SD CNC LATHE, BPCT Cntrl,Constant Surface Spd,3&4 Jaw,Steady,Dor

20" X 60" BRIDGEPORT-ROMI CNC LATHE
MODEL: EZ PATH II SD, S/N: 002-0832-42-364, NEW: 1998

SPECIFICATIONS:
SWING OVER BED......................... 20"
DISTANCE BETWEEN CENTERS............... 60"
SWING OVER CROSS SLIDE................. 10"
CROSS SLIDE TRAVEL .................... 11"
SPINDLE NOSE........................... ASA A2-6"
SPINDLE BORE........................... 2.56"
SPINDLE SPEEDS VARIABLE ............... 40 TO 3,000 RPM
WIDTH OF BED .......................... 13.5"
HEIGHT OF BED ......................... 12.5"
TAILSTOCK QUILL TRAVEL................. 5.11"
TAILSTOCK QUILL DIAMETER............... 3.15"
TAILSTOCK TAPER........................ #4MT
FLOOR SPACE REQUIRED................... 10'5" L x 55" W x 78" H
APPROXIMATE WEIGHT..................... 6,750 LBS.

EQUIPPED WITH:
  - BRIDGEPORT EZ PATH BPCT CNC CONTROL, 32 BIT PROCESSOR WITH
  - TURN PARTS MANUALLY OR AUTOMATICALLY
  - "TEACH" 1ST PART, RUN REMAINING PARTS AUTOMATICALLY
  - 24 OFFSETS, GRAPHIC TOOL LIBRARY, TOOL PATH VIEWED ON-SCREEN
  - AC SPINDLE & AXES MOTORS & DRIVES
  - BALLSCREWS
  - THREADING, TURNING, DRILLING, GROOVING, FACING CYCLES & MORE
  - DUAL ELECTRONIC HANDWHEELS
  - 3.5" FLOPPY DISK DRIVE & RS 232 PORT
  - 12" BTC ADJUST-TRU 3-JAW CHUCK
  - SOUTH BEND 4-JAW CHUCK
  - STEADY REST
  - DORIAN QUICK CHANGE TOOLPOST W/MANY HOLDERS
  - SPLASH GUARDING SINGLE SLIDING DOOR
  - COOLANT SYSTEM WITH REMOVEABLE CHIP PAN
  - 15 HORSE POWER SPINDLE MOTOR
  - OPERATORS & PARTS MANUALS

CONDITION:    ****   EXCELLENT   ****

16" Swing 60" Centers Birmingham DLC-1660 Special Deal ENGINE LATHE, 10 HP, 16 Speed, 4-1/8" Spindle Bore

Our Price: $12,950.00

New "Birmingham" Precision High Speed Engine Lathe
Model: DLC-1660   w/Removable Gap Block
Note: the photo shows this model
Special deal includes Free Delivery to all the lower 48
States and a Free Taper Attachment (installed)

10 HP motor delivers power thru all spindle speeds
Spindle gears, shafts and bearings are lubricated by pumped bath of oil
Induction hardened and ground bedways
D1-8 Camlock spindle with 4-1/8" spindle bore
16 Spindle speeds, 26 - 1,700 RPM
Rapid power traverse to carriage and cross slide
Multiple disc clutch for efficient spindle starting and reversing
Equipped with leadscrew cover

SPECIFICATIONS:
Swing over bed: 16"
Swing over cross slide: 9"
Swing over gap: 27-1/2"
Length of gap: 10"
Distance between centers: 60"
Spindle Bore: 4-1/8"
Spindle nose type (Camlock): D1-8
Spindle taper: MT-6
Spindle speeds: 16
Spindle speed range: 26 - 1,700 RPM
Spindle center to bedway: 8-5/8"
Threads per inch (No.) range (TPI): (42) 7/16 - 80
Metric threads (No.) range (mm): (37) 0.5 - 80
Module threads (No.) range (mm): (32) 0.25 - 40
Diametral threads (No.) range (DP): (42) 7/8 - 160
Long. feeds (No.) range (in/rev): (45) 0.0017 - 0.058
Cross feeds (No.) range (in/rev): (45) 0.0009 - 0.029
Leadscrew diameter (in): 1-9/16"
Leadscrew TPI: 2
Feed rod diamter: 1"
Tooling size: 1" x 1"
Compound slide travel: 5-7/8"
Cross slide travel: 13-3/4"
Tailstock taper: MT-5
Quill travel: 6"
Quill diameter: 3"
Main drive: 10 hp, 220/440V 3 ph
Maximum workpiece weight: 1,100 lbs.
Overall Dimensions:    122" L x 47" W x 54" H
New Weight Approx:   4730 Lbs.

Standard Equipment:
12" 3 Jaw Chuck with reversible jaws
16" 4-Jaw Chuck
15" Face plate
Steady rest capacity 1-1/8 - 6-1/4"
Follow rest capacity 3/4" - 3-1/8"
Dead centers, MT-4
Center sleeve, MT-6 to MT-4
Foot Brake
Threading Dial
Coolant System w/Full Length Splash Guard
Halogen work lamp
Leveling pads
Toolbox with tools

Optional Equipment (call for pricing):
Taper attachment
12" Cap. Larger steady rest with roller jaws
5C Hand lever type collet closer "JFK" USA
Quick Change tool post set
DRO - Newall or Acu-Rite

4.3" Spindle 51" X Axis Hanland TK 611 C HORIZONTAL BORING MILL, Fanuc OI-Mate, Rotary Table, #50 PDB, 20 HP

NEW 4.33 TK 611C / I HANLAND / TRU-BORE 3-AXES
CNC TABLE TYPE HORIZONTAL BORING MILL

SPECIFICATIONS:
DIAMETER OF SPINDLE ...................... 4.33"
TAPER IN SPINDLE ......................... BT50
SPINDLE TRAVEL ........................... 21.65"
TABLE WORKING SURFACE .................... 39.76" X 51.97"
MAX. TABLE LOAD .......................... 11,000 LBS.
HEADSTOCK VERTICAL TRAVEL ................ 35.43"
DISTANCE SPINDLE CENTER TO TABLE TOP ..... 1.97" - 35.63"
TABLE CROSS TRAVEL ....................... 47.24"
TABLE HORIZONTAL TRAVEL .................. 51.18"
MAX. BORING DIAMETER ..................... 9.45"
MAX. DRILLING DIAMETER ................... 1.97"
FACING HEAD RADIAL SLIDE TRAVEL .......... 6.3"
VARIABLE SPINDLE SPEED RANGE ............. 12-1100 RPM
VARIABLE FACING HEAD SPEED RANGE ......... 4-130 RPM
SPINDLE FEED RANGE ....................... .0079 - 13.00 IPM
RAPID TRAVERSE RATE ...................... 197 IPM
MAX. MACHINING DIAMETER OF FACING HEAD ... 24.8"
OVERALL DIMENSIONS ....................... 213"x125"x116"
WEIGHT ................................... 26,400 LBS

EQUIPPED WITH:
- BUILT-IN T-SLOTTED ROTARY TABLE WITH 90DEG. SHOT-PIN AND GRADUATED SCALE
- BUILT-IN FACING HEAD WITH CONTINUOUS FEEDS
- BT50 POWER DRAW-BAR
- BUILT-IN 4-WAY BED
- SADDLE AND BED TELESCOPIC WAY COVERS
- POWER RAPID TRAVERSE
- FANUC OI-MATE CNC CONTROL, PENDANT MOUNT, RS-232 PORT, HAND WHEELS
- 15/20 H.P. MAIN DRIVE MOTOR
- 3/60/440 VOLT INPUT

OPTIONAL: RIGHT ANGLE MILLING ATTACHMENT ..... $4,500.00

GUARANTEE: 1 YEAR

8" Swing 14" Centers Brown & Sharpe 814U OD GRINDER, SWING DOWN I.D., POWER TABLE, 5", 7" OR 10" WHEEL

8" x 14" BROWN & SHARPE "PRECISION" UNIVERSAL
         I.D./O.D. CYLINDRICAL GRINDER

** SWING DOWN I.D. GRINDING ATTACHMENT w/I.D. SPINDLE **

MODEL:  814U VALUEMASTER   S/N: 525-8144-2632    NEW: 1978

CAPACITY:
- GRINDS WORK UP TO ..................... 8" DIAMETER
- GRINDS LENGTH ................................. 14"
- DISTANCE BETWEEN CENTERS ...................... 24"

  WHEELHEAD:
- GRINDING WHEEL SIZE ........ 5", 7" OR 10" DIAMETER
- GRINDING WHEEL SPEEDS (3) ... 2730, 3600 & 5150 RPM
- WHEELHEAD TRAVEL ........................... 8-3/8"
- WHEELHEAD SWIVELS, LEFT & RIGHT ....... 110 DEGREES

  SWIVEL TABLE:
- ANGULAR SETTING TO LEFT & RIGHT ........ 90 DEGREES
- FINE SCREW ADJ. FOR SETTING TAPERS UP TO 3" PER FT.
- TABLE TRAVEL .................................. 22"
- TRAVEL PER REV. OF HANDWHEEL ............ 1/4" SLOW
                                            6-1/4" FAST

  HEADSTOCK:
- SWIVELS LEFT & RIGHT .................. 100 DEGREES
- SPINDLE SPEEDS (4) ................. 128 TO 540 RPM

  EQUIPPED WITH:
SWING DOWN I.D. ATTACHMENT w/I.D. SPINDLE
POWER TABLE TRAVERSE (OPTION)
DOUBLE ENDED WHEEL SPINDLE
CURRENTLY SET-UP WITH 5" GRINDING WHEEL .... MACHINE CAN
  ALSO BE USED WITH 7 & 10" DIAMETER GRINDING WHEELS
DUAL LIVE/DEAD HEADSTOCK SPINDLE
WHEEL DRESSER
WORKHEAD SET-UP WITH A CENTER
FINE CROSS FEED KNOB (.0001" ON WORK DIA.)
VERTICAL HANDWHEEL GRADUATED TO READ .0005"
ANTI-FRICTION BEARING WHEELHEAD SPINDLE
COOLANT PUMP & PIPING
1 H.P. 3/60/230-460 VOLT WHEELHEAD MOTOR
1/6 H.P. WORKHEAD MOTOR
MACHINE IS PRESENTLY WIRED FOR 460 VOLTS

  ** EXCELLENT CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **

10" Swing 24" Centers Brown & Sharpe 1024U OD GRINDER, SWING DOWN ID., HYD. TABLE, PICK & PLUNGE, RAPID,

10" X 24" BROWN & SHARPE UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER

  MODEL: 1024U   S/N: 521-1024-281    NEW: 1980

** FULL AUTO CYCLE (PICK, PLUNGE, RAPID, SPARKOUT TIMER)**

  SWING OVER TABLE .................................... 10"
DISTANCE BETWEEN CENTERS, NOMINAL .................... 24"
DISTANCE BETWEEN CENTERS, MAXIMUM ................ 26-3/4"

  WHEELHEAD SPINDLE SPEEDS (3) ...... 2100, 2400 & 2800 RPM
GRINDING WHEEL SIZE ........................ 12" X 1" X 5"
MINIMUM GRINDING WHEEL WIDTH ........................ 3/8"
SWIVEL AT THE WHEELSLIDE ........... 90 DEGREES EITHER WAY
WHEEL SPINDLE SWIVELS .............. 90 DEGREES EITHER WAY

  INFINITELY VARIABLE SPINDLE SPEEDS ........ 60 TO 600 RPM
HEADSTOCK SPINDLE NOSE TAPER ....................... A2-5"
HEADSTOCK SWIVELS EITHER SIDE OF ZERO ......... 90 DEGREES

  INFINITELY VARIABLE TABLE SPEED .......... 3" TO 150" IPM
TABLE PER REV. OF HANDWHEEL:
SLOW ................................................ 0.1"
FAST ................................................ 1.5"
DWELL AT EACH OR ALTERNATE TABLE REV. ..... 0 - 2-1/2 SEC.
TABLE SWIVEL, SCALES FOR ANGULAR SETTING ...... 8-1/4 DEG.
SCALES-TAPER PER FT. .............................. 3-1/2"

  MAX. TRAVEL OF WHEELSLIDE ............................ 5"
CROSSFEED HANDWHEEL GRAD. ....................... 0.00002"
AUTOMATIC CROSS FEED, REDUCTION IN DIAMETER
  OR WORK AT EACH OR ALTERNATE REVERSALS .. 0.0001" - .003"
HAND FEED PER REV. OF HANDWHEEL:
SLOW ................................................ 0.1"
FAST ................................................ 0.3"

  TAILSTOCK SPINDLE TAPER .........................#7 JARNO
TAILSTOCK SPINDLE TRAVEL ............................ 5/8"

  APPROXIMATE WEIGHT ............................ 5,100 LBS

MACHINE FEATURES:
DUAL RIGHT OR LEFT END WHEEL MOUNTING
SWIVELLING AT WHEEL SPINDLE HEAD OR AT THE WHEEL
  SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN
  COMBINATION STRAIGHT AND TAPER GRINDING,
  EXTERNAL OR INTERNAL.

INFEED HANDWHEEL GRADUATED TO READ TO 0.000020"
HYDRAULIC TABLE TRAVERSE
AUTO INFEED OF WHEELHEAD @ TABLE REVERSALS
AUTO PLUNGE INFEED
POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER
ADJUSTABLE TABLE DWELL
SELF-CONTAINED HYDRAULIC SYSTEM
OIL CHILLER UNIT (FAN COOLED)


EQUIPPED WITH:
SWING DOWN INTERNAL GRINDING ATTACHMENT W/SPINDLE
B & S "HYDROSTATIC" WORKHEAD w/DUAL DEAD/LIVE
  HEADSTOCK SPINDLE
COLLET CHUCK FOR 5C COLLETS
ADAPTOR PLATE
3-POINT STEADY REST
TABLE MOUNTED DRESSER
"FEDERAL" GAUGEING SYSTEM (DOES NOT INCLUDE GAUGE HEAD)
"TRABON" AUTOMATIC LUBRICATION SYSTEM
COOLANT SYSTEM
MOTORS ARE 3/60/230-460 VOLTS
MACHINE IS PRESENTLY WIRED FOR 460 VOLTS

** SUPERIOR CONDITION FROM A DEFENSE CONTRACTOR  **

  ** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **

Machineryvalues.com

Search

Products

Service

Join our mailing list!