|
|
|
|
|
|
15" Swing 54" Centers LeBlond-Makino Regal Servo Shift ENGINE LATHE, Inch/Metric,Taper,3-Jaw,ToolPost,Steady&Follow,
|
Our Price: $12,500.00
|
|
|
15" x 54" LEBLOND-MAKINO SERVO SHIFT ENGINE LATHE
MODEL: 15" REGAL, S/N: 15C-214 NEW: 1988
SPECIFICATIONS:
SWING OVER BED .................... 15-1/2"
SWING OVER CROSS SLIDE ............ 9-1/2"
DISTANCE BETWEEN CENTERS .......... 54"
SPINDLE NOSE ...................... L-1
HOLE THRU SPINDLE ................. 2-17/64"
SPINDLE SPEED RANGE (12) .......... 45 - 1800 RPM
LONGITUDINAL FEED RANGE (48) ...... .0018" - .104" IPR
CROSS FEEDS HALF THE VALUES OF LONGITUDINAL
THREADING RANGE ENGLISH (48) ...... 2 - 112 TPI
THREADING RANGE METRIC (40) ....... 0.25 - 14 mm
TAILSTOCK SPINDLE TRAVEL .......... 5"
TAILSTOCK SPINDLE TAPER ........... #4 MT
APPROX WEIGHT ..................... 3,300 LBS
APPROX DIMENSIONS ................. 104"L x 40"W x 51"H
EQUIPPED WITH:
10 " 3-JAW CUSHMAN CHUCK
STEADY REST
FOLLOW REST
TAPER TURNING ATTACHMENT
TOOLPOST
LIVE CENTER FOR TAILSTOCK
INCH/METRIC HANDWHEELS
MICROMETER CARRIAGE STOP
COOLANT SYSTEM WITH REMOVABLE CHIP PAN
HARD & GROUND REPLACEABLE BEDWAYS
MANUALS
7-1/2 HORSE POWER MAIN MOTOR
MACHINE PRESENTLY WIRED FOR 208 VOLT OPERATION
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
CONDITION: **** EXCELLENT ****
|
|
|
|
|
|
|
|
|
|
|
|
|
16" Swing 54" Centers Monarch ENGINE LATHE, 3&4 Jaw, Taper, Steady & Follow, Aloris Toolpost
|
|
Our Price: $3,950.00
|
|
|
16" x 54" MONARCH ENGINE LATHE
S/N: 30951, NEW: 1948
SPECIFICATIONS:
SWING OVER BED ..................... 17"
SWING OVER CROSS SLIDE ............. 9"
DISTANCE BETWEEN CENTERS ........... 54"
HOLE THRU SPINDLE .................. 1-9/16"
SPINDLE NOSE, CAMLOCK, SIZE ........ D1-6"
SPINDLE SPEEDS (16) ................ 17 - 700 RPM
THREAD RANGE - INCH (66) ........... 2 - 120 TPI
FEED CHANGES (66): LONGITUDINAL .... .0040 -.0841 IPR
TAILSTOCK SPINDLE DIAMETER ......... 3-1/8"
TAILSTOCK SPINDLE TRAVEL ........... 5"
TAILSTOCK SPINDLE TAPER ............ #4 MORSE
APPROX WEIGHT ...................... 6,500 LBS
APPROX DIMENSIONS .................. 10'L x 50"W x 57"H
EQUIPPED WITH:
FLAME HARDENED & GROUND BED WAYS
TAPER TURNING ATTACHMENT
15" 4-JAW CHUCK
9" 3-JAW CHUCK
ALORIS QUICK CHANGE TOOLPOST
STEADY REST
FOLLOW REST
THREADING DIAL
SELF CONTAINED COOLANT SYSTEM
10 HORSE POWER
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
GOOD OPERATING CONDITION
|
|
|
|
|
|
|
|
|
|
|
|
|
16.5" Swing 30" Centers Monarch WAA ENGINE LATHE,
|
|
Our Price: $3,950.00
|
|
|
14" (16-1/2") x 30" MONARCH
TOOLMAKER'S ENGINE LATHE
MODEL: WAA, S/N: 10433, NEW: 1941
SPECIFICATIONS:
ACTUAL SWING OVER BED .............. 16-1/2"
SWING OVER CROSS SLIDE ............. 8-1/2"
DISTANCE BETWEEN CENTERS ........... 30"
HOLE THRU SPINDLE .................. 1-9/16"
SPINDLE NOSE, CAMLOCK, SIZE ........ D-1-6
SPINDLE SPEEDS (16) ................ 19-800 RPM
THREAD RANGE - INCH (48) ........... 1- 1/2 TO 92 TPI
FEED CHANGES (48): LONGITUDINAL .... .0038-.240 IPR
TAILSTOCK SPINDLE DIAMETER ......... 3-1/8"
TAILSTOCK SPINDLE TRAVEL ........... 5"
TAILSTOCK SPINDLE TAPER ............ #4 MORSE
BED WIDTH .......................... 17-5/8"
APPROX WEIGHT ...................... 5,800 LBS
APPROX DIMENSIONS .................. 9'5" x 50" x 57"
EQUIPPED WITH:
FLAME HARDENED & GROUND BED WAYS
10" DIA 3-JAW CHUCK w/ REVERSIBLE JAWS
CARRIAGE STOP
4-WAY TOOLPOST
THREADING DIAL
COOLANT/CHIP PAN
CHUCK GUARD
5 HP 3/60/220-440 VOLT SPINDLE DRIVE MOTOR & ELEC CONTROLS
MACHINE IS WIRED FOR 220 VOLT OPERATION
GOOD OPERATING CONDITION
|
|
|
|
|
|
|
|
|
|
|
|
|
24" Swing 144" Centers LeBlond 24" Regal Servo-Shift ENGINE LATHE, 3-Jaw Chuck, (2) Steady Rests, Threads, Rapid,
|
|
Our Price: $22,500.00
|
|
|
24" x 144" LEBLOND SERVO-SHIFT ENGINE LATHE
MODEL: 24" REGAL, S/N: 5H-836, NEW: 1976
SPECIFICATIONS:
SWING OVER BED .................... 26"
SWING OVER CROSS SLIDE ............ 18-1/4"
DISTANCE BETWEEN CENTERS .......... 144"
WIDTH OF BED ...................... 17"
SPINDLE NOSE ...................... L-2
HOLE THRU SPINDLE ................. 2-3/16"
SPINDLE SPEED RANGE (12) .......... 27 - 1080 RPM
LONGITUDINAL FEED RANGE (48) ...... .0036" - .205" IPR
CROSS FEEDS HALF THE VALUES OF LONGITUDINAL
THREADING RANGE ENGLISH (48) ...... 2 - 112 TPI
TAILSTOCK SPINDLE TRAVEL .......... 7"
TAILSTOCK SPINDLE TAPER ........... #5 MT
APPROX WEIGHT ..................... 8,500 LBS
APPROX DIMENSIONS ................. 192"L x 50"W x 55"H
EQUIPPED WITH:
- HARDENED BED WAYS
- POWER RAPID TRAVERSE
- SWIVEL COMPOUND
- 15" CUSHMAN 3-JAW CHUCK
- DOG PLATE
- 12" CAPACITY ROLLER TYPE STEADY REST
- 10-1/2" CAPACITY PLAIN TYPE STEADY REST
- JACOBS DRILL CHUCK FOR TAILSTOCK
- LIVE & DEAD CENTER FOR TAILSTOCK
- COOLANT SYSTEM
- 15 HORSE POWER MAIN MOTOR WITH CONTROLS
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
CONDITION: **** SUPERB ****
|
|
|
|
|
|
|
|
|
|
|
|
|
37" Swing 160" Centers Niles TYPE DLZ800/III ENGINE LATHE,
|
|
|
37"/43" X 160" SIGMA NILES HEAVY DUTY ENGINE LATHE,
TYPE DLZ800/III, S/N 1650025.38, NEW 1968
SPECIFICATIONS:
MAX. SWING OVER BED ...................... 37"
MAX, SWING IN GAP ........................ 43"
LENGTH OF GAP IN FRONT OF FACEPLATE ...... 12.2"
MAX. SWING OVER CROSS SLIDE .............. 24.5"
SPINDLE BORE ............................. 3.54"
BED WIDTH ................................ 27.95"
SIZE OF CENTERS .......................... NO.6 M.T.
TAILSTOCK QUILL DIAMETER ................. 4.92"
SIDES OF FOUR-WAY TOOL BLOCK ............. 9.84"
18 SPINDLE SPEEDS ........................ 14-710 RPM
38 LONGITUDINAL FEEDS .................... .0020-.1398 IPR
38 CROSS FEEDS ........................... .0007-.0492 IPR
THREAD RANGE:
INCH ............................... 2-28 T.P.I.
METRIC ............................. 1-14 MM.
DIAMETRAL .......................... 8-112
WEIGHT CAPACITY BETWEEN CENTERS .......... 8,818 LBS.
WEIGHT CAPACITY WITH 1 STEADY REST ....... 11,023 LBS.
WEIGHT CAPACITY WITH 2 STEADY RESTS ...... 13,889 LBS.
APPROX. WEIGHT ........................... 20,000 LBS
EQUIPPED WITH:
- SWIVEL COMPOUND WITH BUILT-IN 4-WAY TOOLPOST AND POWER RAPID TRAVERSE
- INCH/METRIC THREADING
- THREAD DIAL
- 31" DIA. 4-JAW CHUCK
- SHORT GAP IN BED
- 15" DIA. 3-JAW UNIVERSAL CHUCK
- BACK PLATE FOR CHUCK
- T-SLOTTED REAR-REST
- 9.84" DIA. CAPACITY 3POINT ROLLER STEADY REST
- 19.6" DIA. CAPACITY 3POINT ROLLER STEADY REST
- HEADSTOCK ADAPTER SLEEVE WITH DEAD CENTER
- (3) LIVE CENTERS
- PAN BED AND COOLANT
- 40 HP AC MAIN DRIVE MOTOR WITH CONTROL CABINET
- WIRED FOR 3/60/440 VOLT OPERATION
CONDITION: VERY GOOD
|
|
|
|
|
|
|
|
|
|
|
|
|
40" Swing 236" Centers Tru-Turn CW62100DX6000 ENGINE LATHE,
|
|
|
NEW" 40"/57" X 236" TRU-TURN GAP BED LATHE,
MODEL CW62100DX6000
SPECIFICATIONS:
MAX. SWING OVER BED ................ 39.37"
MAX. SWING OVER CROSS SLIDE ........ 24.8"
MAX. SWING IN GAP .................. 57.09"
BED WIDTH .......................... 29.72"
SPINDLE NOSE ....................... A15
SPINDLE BORE ....................... 5.12"
TAPER OF SPINDLE BORE .............. NO. 140 METRIC
TAPER OF TAILSTOCK QUILL ........... NO. 6 M.T.
TAILSTOCK QUILL TRAVEL ............. 11.81"
DIAMETER OF TAILSTOCK QUILL ........ 5.51"
SPINDLE SPEEDS (21) ................ 3.15 - 315 RPM
LONGITUDINAL FEEDS (56) ............ .0039 - .472 IPR
CROSS FEEDS (56) ................... .00197 - .236 IPR
THREAD RANGE:
INCH ....................... 3/8 - 28 T.P.I.
METRIC ..................... 1 -120 MM
MODULE ..................... 0.5 - 60 MM
DIAMETRAL .................. 1 - 56 D.P.
APPROX. WEIGHT ..................... 30,580 LBS.
DIMENSIONS ......................... 358.3"x 82.7"x 70.5"H
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 39.37" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
- 3 /60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
|
|
|
|
|
|
50" Swing 236" Centers Tru-Turn CW62125DX6000 ENGINE LATHE,
|
|
|
NEW" 50"/67" X 236" CC TRU-TURN GAP BED LATHE,
MODEL CW62125DX6000
SPECIFICATIONS:
MAX. SWING OVER BED .................. 49.21"
MAX. SWING OVER CROSS SLIDE .......... 34.65"
MAX. SWING IN GAP .................... 66.93"
BED WIDTH ............................ 29.72"
SPINDLE NOSE ......................... A15
SPINDLE BORE ......................... 5.12"
TAPER OF SPINDLE BORE ................ NO. 140 METRIC
TAPER OF TAILSTOCK QUILL ............. NO. 6 M.T.
TAILSTOCK QUILL TRAVEL ............... 11.81"
DIAMETER OF TAILSTOCK QUILL .......... 5.51"
SPINDLE SPEEDS (21) .................. 3.15 – 315 RPM
LONGITUDINAL FEEDS (56) .............. .0039 - .472 IPR
CROSS FEEDS (56) ..................... .00197 - .236 IPR
THREAD RANGE:
INCH ........................... 3/8 – 28 T.P.I.
METRIC ......................... 1 -120 MM
MODULE ......................... 0.5 – 60 MM
DIAMETRAL ...................... 1 – 56 D.P.
APPROX. WEIGHT ....................... 31,000 LBS.
DIMENSIONS ........................... 358.3"x82.7"x75.4"
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 39.37" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
- 3 /60/440 VOLT ELECTRICS
|
|
|
|
|
|
|
|
|
|
|
|
|
55" Swing 197" Centers Tru-Turn CW62140D/5000 ENGINE LATHE,
|
|
|
55"/73" X 197" TRU-TURN GAP BED LATHE,
MODEL CW62140D/5000
SPECIFICATIONS:
MAX. SWING OVER BED ................. 55.12"
MAX. SWING OVER CROSS SLIDE ......... 40.55"
MAX. SWING IN GAP ................... 72.83"
BED WIDTH ........................... 29.72"
SPINDLE NOSE ........................ A15
SPINDLE BORE ........................ 5.12"
TAPER OF SPINDLE BORE ............... NO. 140 METRIC
TAPER OF TAILSTOCK QUILL ............ NO. 6 M.T.
TAILSTOCK QUILL TRAVEL .............. 11.81"
DIAMETER OF TAILSTOCK QUILL ......... 5.51"
SPINDLE SPEEDS (21) ................. 3.15 – 315 RPM
LONGITUDINAL FEEDS (56) ............. .0039 - .472 IPR
CROSS FEEDS (56) .................... .00197 - .236 IPR
THREAD RANGE:
INCH: .......................... 3/8 – 28 T.P.I.
METRIC: ........................ 1 -120 MM
MODULE: ........................ 0.5 – 60 MM
DIAMETRAL: ..................... 1 – 56 D.P.
APPROX. WEIGHT: ..................... 30,500 LBS.
DIMENSIONS: ......................... 319"x 82.7"x 78.35"
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 49.2" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
- 3 /60/440 VOLT ELECTRICS
|
|
|
|
|
|
|
|
|
|
|
|
|
63" Swing 157" Centers Tru-Turn CW62160D/4000 ENGINE LATHE,
|
|
|
63"/80" X 157" CC TRU-TURN GAP BED LATHE,
MODEL CW62160D/4000
SPECIFICATIONS:
MAX. SWING OVER BED .................. 63"
MAX. SWING OVER CROSS SLIDE .......... 48.43"
MAX. SWING IN GAP .................... 80.7"
BED WIDTH ............................ 29.72"
SPINDLE NOSE ......................... A15
SPINDLE BORE ......................... 5.12"
TAPER OF SPINDLE BORE NO. ............ 140 METRIC
TAPER OF TAILSTOCK QUILL ............. NO. 6 M.T.
TAILSTOCK QUILL TRAVEL ............... 11.81"
DIAMETER OF TAILSTOCK QUILL .......... 5.51"
SPINDLE SPEEDS (21) .................. 3.15 – 315 RPM
LONGITUDINAL FEEDS (56) .............. .0039 - .472 IPR
CROSS FEEDS (56) ..................... .00197 - .236 IPR
THREAD RANGE:
INCH: ........................... 3/8 – 28 T.P.I.
METRIC: ......................... 1 -120 MM
MODULE: ......................... 0.5 – 60 MM
DIAMETRAL: ...................... 1 – 56 D.P.
APPROX. WEIGHT: ...................... 29,260 LBS.
DIMENSIONS: .......................... 279.5"x 82.7"x 82.3"
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 49.2" DIA. 4-JAW CHUCK
- STEADY REST
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
3 /60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
|
|
|
|
|
|
63" Swing 236" Centers Tru-Turn CW61160LX6000 ENGINE LATHE
|
|
|
NEW" 63" X 236" TRU-TURN HEAVY DUTY LATHE,
MODEL CW61160L X 6000
SPECIFICATIONS:
MAX. SWING OVER BED ............... 63"
MAX. SWING OVER CROSS-SLIDE ....... 48.43"
BED WIDTH ......................... 43.3"
SPINDLE NOSE ...................... A15
SPINDLE BORE ...................... 5.12"
TAPER OF SPINDLE BORE METRIC ...... NO. 140
TAPER OF TAILSTOCK QUILL METRIC ... 80
TAILSTOCK QUILL TRAVEL ............ 7.87"
DIAMETER OF TAILSTOCK QUILL ....... 10.24"
SPINDLE SPEEDS (21) ............... 3.15 - 315 RPM
LONGITUDINAL FEEDS (56) ........... .0039 - .472 IPR
CROSS FEEDS (56) .................. .00197 - .236 IPR
THREAD RANGE:
INCH ....................... 3/8 - 28 T.P.I.
METRIC ..................... 1 - 120 MM
MODULE ..................... 0.5 - 60 MM
DIAMETRAL .................. 1 - 56 D.P.
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- 49.2" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH/METRIC THREADING
- THREAD DIAL
- CENTER WITH BUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 40 HP DRIVE MOTOR WITH CONTROLS
- 3/60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
