Machineryvalues.com

(Your shopping cart is empty)
You are here: Home > Manual Lathes > Engine Lathes > Size > 15.1" - 20"
Sort By:
Page of 1  
16.5
16.5" Swing 30" Centers Monarch WAA ENGINE LATHE,
Our Price: $3,950.00


14" (16-1/2") x 30" MONARCH
TOOLMAKER'S ENGINE LATHE

MODEL: WAA, S/N: 10433, NEW: 1941

SPECIFICATIONS:
ACTUAL SWING OVER BED .............. 16-1/2"
SWING OVER CROSS SLIDE ............. 8-1/2"
DISTANCE BETWEEN CENTERS ........... 30"
HOLE THRU SPINDLE .................. 1-9/16"
SPINDLE NOSE, CAMLOCK, SIZE ........ D-1-6
SPINDLE SPEEDS (16) ................ 19-800 RPM
THREAD RANGE - INCH (48) ........... 1- 1/2 TO 92 TPI
FEED CHANGES (48): LONGITUDINAL .... .0038-.240 IPR
TAILSTOCK SPINDLE DIAMETER ......... 3-1/8"
TAILSTOCK SPINDLE TRAVEL ........... 5"
TAILSTOCK SPINDLE TAPER ............ #4 MORSE
BED WIDTH .......................... 17-5/8"
APPROX WEIGHT ...................... 5,800 LBS
APPROX DIMENSIONS .................. 9'5" x 50" x 57"

EQUIPPED WITH:
FLAME HARDENED & GROUND BED WAYS
10" DIA 3-JAW CHUCK w/ REVERSIBLE JAWS
CARRIAGE STOP
4-WAY TOOLPOST
THREADING DIAL
COOLANT/CHIP PAN
CHUCK GUARD
5 HP 3/60/220-440 VOLT SPINDLE DRIVE MOTOR & ELEC CONTROLS
MACHINE IS WIRED FOR 220 VOLT OPERATION

GOOD OPERATING CONDITION
16
16" Swing 54" Centers Monarch ENGINE LATHE, 3&4 Jaw, Taper, Steady & Follow, Aloris Toolpost
Our Price: $3,950.00

16"  x 54" MONARCH ENGINE LATHE
  S/N: 30951,   NEW: 1948

SPECIFICATIONS:
SWING OVER BED ..................... 17"
SWING OVER CROSS SLIDE ............. 9"
DISTANCE BETWEEN CENTERS ........... 54"
HOLE THRU SPINDLE .................. 1-9/16"
SPINDLE NOSE, CAMLOCK, SIZE ........ D1-6"
SPINDLE SPEEDS (16) ................ 17 - 700 RPM
THREAD RANGE - INCH (66) ........... 2 - 120 TPI
FEED CHANGES (66): LONGITUDINAL .... .0040 -.0841 IPR
TAILSTOCK SPINDLE DIAMETER ......... 3-1/8"
TAILSTOCK SPINDLE TRAVEL ........... 5"
TAILSTOCK SPINDLE TAPER ............ #4 MORSE
APPROX WEIGHT ...................... 6,500 LBS
APPROX DIMENSIONS .................. 10'L x 50"W x 57"H

EQUIPPED WITH:
FLAME HARDENED & GROUND BED WAYS
TAPER TURNING ATTACHMENT
15" 4-JAW CHUCK
9" 3-JAW CHUCK
ALORIS QUICK CHANGE TOOLPOST
STEADY REST
FOLLOW REST
THREADING DIAL
SELF CONTAINED COOLANT SYSTEM
10 HORSE POWER

INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
GOOD OPERATING CONDITION