|
|
|
|
|
|
37" Swing 160" Centers Niles TYPE DLZ800/III ENGINE LATHE,
|
|
|
37"/43" X 160" SIGMA NILES HEAVY DUTY ENGINE LATHE,
TYPE DLZ800/III, S/N 1650025.38, NEW 1968
SPECIFICATIONS:
MAX. SWING OVER BED ...................... 37"
MAX, SWING IN GAP ........................ 43"
LENGTH OF GAP IN FRONT OF FACEPLATE ...... 12.2"
MAX. SWING OVER CROSS SLIDE .............. 24.5"
SPINDLE BORE ............................. 3.54"
BED WIDTH ................................ 27.95"
SIZE OF CENTERS .......................... NO.6 M.T.
TAILSTOCK QUILL DIAMETER ................. 4.92"
SIDES OF FOUR-WAY TOOL BLOCK ............. 9.84"
18 SPINDLE SPEEDS ........................ 14-710 RPM
38 LONGITUDINAL FEEDS .................... .0020-.1398 IPR
38 CROSS FEEDS ........................... .0007-.0492 IPR
THREAD RANGE:
INCH ............................... 2-28 T.P.I.
METRIC ............................. 1-14 MM.
DIAMETRAL .......................... 8-112
WEIGHT CAPACITY BETWEEN CENTERS .......... 8,818 LBS.
WEIGHT CAPACITY WITH 1 STEADY REST ....... 11,023 LBS.
WEIGHT CAPACITY WITH 2 STEADY RESTS ...... 13,889 LBS.
APPROX. WEIGHT ........................... 20,000 LBS
EQUIPPED WITH:
- SWIVEL COMPOUND WITH BUILT-IN 4-WAY TOOLPOST AND POWER RAPID TRAVERSE
- INCH/METRIC THREADING
- THREAD DIAL
- 31" DIA. 4-JAW CHUCK
- SHORT GAP IN BED
- 15" DIA. 3-JAW UNIVERSAL CHUCK
- BACK PLATE FOR CHUCK
- T-SLOTTED REAR-REST
- 9.84" DIA. CAPACITY 3POINT ROLLER STEADY REST
- 19.6" DIA. CAPACITY 3POINT ROLLER STEADY REST
- HEADSTOCK ADAPTER SLEEVE WITH DEAD CENTER
- (3) LIVE CENTERS
- PAN BED AND COOLANT
- 40 HP AC MAIN DRIVE MOTOR WITH CONTROL CABINET
- WIRED FOR 3/60/440 VOLT OPERATION
CONDITION: VERY GOOD
|
|
|
|
|
|
|
|
|
|
|
|
|
71" Swing 315" Centers Tru-Turn CW61180LX8000 ENGINE LATHE,
|
|
|
"NEW" 71" X 315"CC TRU-TURN HEAVY DUTY LATHE
MODEL CW61180LX8000
SPECIFICATIONS:
MAX. SWING OVER BED ............. 70.87"
MAX. SWING OVER CROSS-SLIDE ..... 55.12"
DISTANCE BETWEEN CENTERS ........ 315"
BED WIDTH ....................... 43.3"
SPINDLE NOSE .................... A15
SPINDLE BORE .................... 5.12"
TAPER IN SPINDLE BORE METRIC .... NO.140
TAPER OF TAILSTOCK QUILL METRIC . 80
TAILSTOCK QUILL TRAVEL .......... 7.89"
DIAMETER OF TAILSTOCK QUILL ..... 10.24"
SPINDLE SPEEDS (21) ............. 3.15-315 RPM
LONGITUDINAL FEEDS (56) ......... .0039-.472 IPR
CROSS FEDS (56) ................. .00197-.236 IPR
THREAD RANGE:
INCH ...................... 3/8 – 28 T.P.I.
METRIC .................... 1- 120MM.
MODULE .................... 0.5- 60MM.
DIAMETRAL ................. 1- 56 D.P.
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- 49.2" DIA. 4-JAW CHUCK
- (2) STEADY REST 26" & 39 3/8"CAP.
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH/METRIC THREADING
- THREAD DIAL
- CENTER WITH BUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 40 HP DRIVE MOTOR WITH CONTROLS
- 3/60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
|
|
|
|
|
|
40" Swing 236" Centers Tru-Turn CW62100DX6000 ENGINE LATHE,
|
|
|
NEW" 40"/57" X 236" TRU-TURN GAP BED LATHE,
MODEL CW62100DX6000
SPECIFICATIONS:
MAX. SWING OVER BED ................ 39.37"
MAX. SWING OVER CROSS SLIDE ........ 24.8"
MAX. SWING IN GAP .................. 57.09"
BED WIDTH .......................... 29.72"
SPINDLE NOSE ....................... A15
SPINDLE BORE ....................... 5.12"
TAPER OF SPINDLE BORE .............. NO. 140 METRIC
TAPER OF TAILSTOCK QUILL ........... NO. 6 M.T.
TAILSTOCK QUILL TRAVEL ............. 11.81"
DIAMETER OF TAILSTOCK QUILL ........ 5.51"
SPINDLE SPEEDS (21) ................ 3.15 - 315 RPM
LONGITUDINAL FEEDS (56) ............ .0039 - .472 IPR
CROSS FEEDS (56) ................... .00197 - .236 IPR
THREAD RANGE:
INCH ....................... 3/8 - 28 T.P.I.
METRIC ..................... 1 -120 MM
MODULE ..................... 0.5 - 60 MM
DIAMETRAL .................. 1 - 56 D.P.
APPROX. WEIGHT ..................... 30,580 LBS.
DIMENSIONS ......................... 358.3"x 82.7"x 70.5"H
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 39.37" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
- 3 /60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
|
|
|
|
|
|
50" Swing 236" Centers Tru-Turn CW62125DX6000 ENGINE LATHE,
|
|
|
NEW" 50"/67" X 236" CC TRU-TURN GAP BED LATHE,
MODEL CW62125DX6000
SPECIFICATIONS:
MAX. SWING OVER BED .................. 49.21"
MAX. SWING OVER CROSS SLIDE .......... 34.65"
MAX. SWING IN GAP .................... 66.93"
BED WIDTH ............................ 29.72"
SPINDLE NOSE ......................... A15
SPINDLE BORE ......................... 5.12"
TAPER OF SPINDLE BORE ................ NO. 140 METRIC
TAPER OF TAILSTOCK QUILL ............. NO. 6 M.T.
TAILSTOCK QUILL TRAVEL ............... 11.81"
DIAMETER OF TAILSTOCK QUILL .......... 5.51"
SPINDLE SPEEDS (21) .................. 3.15 – 315 RPM
LONGITUDINAL FEEDS (56) .............. .0039 - .472 IPR
CROSS FEEDS (56) ..................... .00197 - .236 IPR
THREAD RANGE:
INCH ........................... 3/8 – 28 T.P.I.
METRIC ......................... 1 -120 MM
MODULE ......................... 0.5 – 60 MM
DIAMETRAL ...................... 1 – 56 D.P.
APPROX. WEIGHT ....................... 31,000 LBS.
DIMENSIONS ........................... 358.3"x82.7"x75.4"
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 39.37" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
- 3 /60/440 VOLT ELECTRICS
|
|
|
|
|
|
|
|
|
|
|
|
|
63" Swing 236" Centers Tru-Turn CW61160LX6000 ENGINE LATHE
|
|
|
NEW" 63" X 236" TRU-TURN HEAVY DUTY LATHE,
MODEL CW61160L X 6000
SPECIFICATIONS:
MAX. SWING OVER BED ............... 63"
MAX. SWING OVER CROSS-SLIDE ....... 48.43"
BED WIDTH ......................... 43.3"
SPINDLE NOSE ...................... A15
SPINDLE BORE ...................... 5.12"
TAPER OF SPINDLE BORE METRIC ...... NO. 140
TAPER OF TAILSTOCK QUILL METRIC ... 80
TAILSTOCK QUILL TRAVEL ............ 7.87"
DIAMETER OF TAILSTOCK QUILL ....... 10.24"
SPINDLE SPEEDS (21) ............... 3.15 - 315 RPM
LONGITUDINAL FEEDS (56) ........... .0039 - .472 IPR
CROSS FEEDS (56) .................. .00197 - .236 IPR
THREAD RANGE:
INCH ....................... 3/8 - 28 T.P.I.
METRIC ..................... 1 - 120 MM
MODULE ..................... 0.5 - 60 MM
DIAMETRAL .................. 1 - 56 D.P.
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- 49.2" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH/METRIC THREADING
- THREAD DIAL
- CENTER WITH BUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 40 HP DRIVE MOTOR WITH CONTROLS
- 3/60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
|
|
|
|
|
|
63" Swing 236" Centers Tru-Turn CW62160D/6000 ENGINE LATHE,
|
|
|
NEW" 63"/80" X 236" CC TRU-TURN GAP BED LATHE,
MODEL CW62160D/6000
SPECIFICATIONS:
MAX. SWING OVER BED .................. 63"
MAX. SWING OVER CROSS SLIDE .......... 48.43"
MAX. SWING IN GAP .................... 80.7"
BED WIDTH ............................ 29.72"
SPINDLE NOSE ......................... A15
SPINDLE BORE ......................... 5.12"
TAPER OF SPINDLE BORE ................ NO. 140 METRIC
TAPER OF TAILSTOCK QUILL ............. NO. 6 M.T.
TAILSTOCK QUILL TRAVEL ............... 11.81"
DIAMETER OF TAILSTOCK QUILL .......... 5.51"
SPINDLE SPEEDS (21) .................. 3.15 – 315 RPM
LONGITUDINAL FEEDS (56) .............. .0039 - .472 IPR
CROSS FEEDS (56) ..................... .00197 - .236 IPR
THREAD RANGE:
INCH .......................... 3/8 – 28 T.P.I.
METRIC ........................ 1 -120 MM
MODULE ........................ 0.5 – 60 MM
DIAMETRAL ..................... 1 – 56 D.P.
APPROX. WEIGHT ....................... 32,700 LBS.
DIMENSIONS ........................... 358.3"x 82.7"x 82.3"H
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 49.2" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
- 3 /60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
|
|
|
|
|
|
71" Swing 237" Centers Tru-Turn CW61180LX6000 ENGINE LATHE
|
|
|
"NEW" 71" X 237"CC TRU-TURN HEAVY DUTY LATHE
MODEL CW61180LX6000
SPECIFICATIONS:
MAX. SWING OVER BED ............. 70.87"
MAX. SWING OVER CROSS-SLIDE ..... 55.12"
DISTANCE BETWEEN CENTERS ........ 237"
BED WIDTH ....................... 43.3"
SPINDLE NOSE .................... A15
SPINDLE BORE .................... 5.12"
TAPER IN SPINDLE BORE METRIC .... NO.140
TAPER OF TAILSTOCK QUILL METRIC . 80
TAILSTOCK QUILL TRAVEL .......... 7.89"
DIAMETER OF TAILSTOCK QUILL ..... 10.24"
SPINDLE SPEEDS (21) ............. 3.15-315 RPM
LONGITUDINAL FEEDS (56) ......... .0039-.472 IPR
CROSS FEDS (56) ................. .00197-.236 IPR
THREAD RANGE:
INCH ...................... 3/8 – 28 T.P.I.
METRIC .................... 1- 120MM.
MODULE .................... 0.5- 60MM.
DIAMETRAL ................. 1- 56 D.P.
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- 49.2" DIA. 4-JAW CHUCK
- (2) STEADY REST 26" & 39 3/8"CAP.
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH/METRIC THREADING
- THREAD DIAL
- CENTER WITH BUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 40 HP DRIVE MOTOR WITH CONTROLS
- 3/60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
|
|
|
|
|
|
63" Swing 157" Centers Tru-Turn CW62160D/4000 ENGINE LATHE,
|
|
|
63"/80" X 157" CC TRU-TURN GAP BED LATHE,
MODEL CW62160D/4000
SPECIFICATIONS:
MAX. SWING OVER BED .................. 63"
MAX. SWING OVER CROSS SLIDE .......... 48.43"
MAX. SWING IN GAP .................... 80.7"
BED WIDTH ............................ 29.72"
SPINDLE NOSE ......................... A15
SPINDLE BORE ......................... 5.12"
TAPER OF SPINDLE BORE NO. ............ 140 METRIC
TAPER OF TAILSTOCK QUILL ............. NO. 6 M.T.
TAILSTOCK QUILL TRAVEL ............... 11.81"
DIAMETER OF TAILSTOCK QUILL .......... 5.51"
SPINDLE SPEEDS (21) .................. 3.15 – 315 RPM
LONGITUDINAL FEEDS (56) .............. .0039 - .472 IPR
CROSS FEEDS (56) ..................... .00197 - .236 IPR
THREAD RANGE:
INCH: ........................... 3/8 – 28 T.P.I.
METRIC: ......................... 1 -120 MM
MODULE: ......................... 0.5 – 60 MM
DIAMETRAL: ...................... 1 – 56 D.P.
APPROX. WEIGHT: ...................... 29,260 LBS.
DIMENSIONS: .......................... 279.5"x 82.7"x 82.3"
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 49.2" DIA. 4-JAW CHUCK
- STEADY REST
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
3 /60/440 VOLT ELECTRICS
1 YEAR WARRANTY
|
|
|
|
|
|
|
|
|
|
|
|
|
55" Swing 197" Centers Tru-Turn CW62140D/5000 ENGINE LATHE,
|
|
|
55"/73" X 197" TRU-TURN GAP BED LATHE,
MODEL CW62140D/5000
SPECIFICATIONS:
MAX. SWING OVER BED ................. 55.12"
MAX. SWING OVER CROSS SLIDE ......... 40.55"
MAX. SWING IN GAP ................... 72.83"
BED WIDTH ........................... 29.72"
SPINDLE NOSE ........................ A15
SPINDLE BORE ........................ 5.12"
TAPER OF SPINDLE BORE ............... NO. 140 METRIC
TAPER OF TAILSTOCK QUILL ............ NO. 6 M.T.
TAILSTOCK QUILL TRAVEL .............. 11.81"
DIAMETER OF TAILSTOCK QUILL ......... 5.51"
SPINDLE SPEEDS (21) ................. 3.15 – 315 RPM
LONGITUDINAL FEEDS (56) ............. .0039 - .472 IPR
CROSS FEEDS (56) .................... .00197 - .236 IPR
THREAD RANGE:
INCH: .......................... 3/8 – 28 T.P.I.
METRIC: ........................ 1 -120 MM
MODULE: ........................ 0.5 – 60 MM
DIAMETRAL: ..................... 1 – 56 D.P.
APPROX. WEIGHT: ..................... 30,500 LBS.
DIMENSIONS: ......................... 319"x 82.7"x 78.35"
EQUIPPED WITH:
- FLAME HARDENED BED WAYS
- REMOVABLE GAP BED
- 49.2" DIA. 4-JAW CHUCK
- (2) STEADY RESTS
- FOLLOW REST
- POWER DRIVE TO TOP SLIDE FOR CONICAL CUTTING
- SWIVEL COMPOUND
- INCH / METRIC THREADING
- THREAD DIAL
- CENTER WITH BRUSHING
- 4-WAY POWER RAPID TRAVERSE
- WORK LIGHT
- PAN BED AND COOLANT SYSTEM
- 30 H.P. DRIVE MOTOR WITH CONTROLS
- 3 /60/440 VOLT ELECTRICS
|
|
|
|
|
|
|
|
|
|
|
|
|
39" Swing 200" Centers Poreba TR100 B1/5M ENGINE LATHE, Inch/Metric,Taper,(2)SteadyRest,Follow,Taper,4-Jaw
|
|
|
39"/49" x 196" POREBA GAP BED ENGINE LATHE
MODEL: TR-100 B1/5M, S/N: 1191-285, NEW: 1980
SPECIFICATIONS:
SWING OVER BED WAYS ......................... 39-3/8"
SWIND IN REMOVEABLE GAP ..................... 49-1/4"
SWING OVER CROSS SLIDE ...................... 26-3/4"
DISTANCE BETWEEN CENTERS .................... 196"
HOLE THRU SPINDLE ........................... 4-3/4"
SPINDLE NOSE ................................ A1-11"
MAXIMUM WEIGHT OF WORKPIECE BETWEEN CENTERS . 17,500 LBS.
MAX. WEIGHT OF WORKPIECE WITH 2 STEADY RESTS. 24,500 LBS
SPINDLE SPEED RANGE ...)..................... 6.3 - 630 RPM
INCH THREADING RANGE ........................ 1/2 - 60 TPI
METRIC THREADING RANGE ...................... 1 - 120 mm
TAILSTOCK SPINDLE TAPER ..................... #6MT
TAILSTOCK SPINDLE TRAVEL .................... 12"
TAILSTOCK SPINDLE DIAMETER .................. 5-1/2"
APPROXIMATE FLOOR SPACE .............. 26'L x 78"W x 63"H
APPROX WEIGHT ............................... 26,500 LBS
EQUIPPED WITH:
INCH & METRIC THREADING
LONGITUDINAL, CROSS & TOP SLIDE FEEDS
TREPANNING & BORING ATTACHMENT (OPTIONAL AT EXTRA COST)
RAPID TRAVERSE
TAPER TURNING ATTACHMENT
31" 4-JAW CHUCK
18" CAPACITY STEADY REST
14" CAPACITY STEADY REST
FOLLOW REST
FOUR WAY TURRET TOOLPOST
LIVE CENTER FOR TAILSTOCK
TOOLPOST
COOLANT SYSTEM
HARDENED & GROUND BED WAYS
35 / 50 HORSE POWER TWO SPEED MAIN MOTOR
INSPECT IN OUR NEW JERSEY WAREHOUSE
CONDITION: **** EXCELLENT ****
|
|
|
|
|
|
|
