Machineryvalues.com

(Your shopping cart is empty)
You are here: Home > Manual Mills > Vertical Mills - Vertical Milling Machines > Size > 0 - 43"
Find by Pricing
Below 4000 (2)
4500 and Above (4)
Find by Brand
Bridgeport (5)
Siber Hegner (1)
Sort By:
Page of 1
42
42" Table 1.5HP Spindle Bridgeport 2J VERTICAL MILL

TAKISAWA CNC TURNING CENTER
MODEL: TS-30 NEW: 1986

SPECIFICATIONS:
MAX SWING ......................... 25"
MAX SWING OVER CARRIAGE ........... 18.5"
MAX TURNING DIAMETER .............. 15.75"
MAX DISTANCE BETWEEN CENTERS ...... 79.28"
SPINDLE BORE DIA .................. 3.26"
SPINDLE NOSE ...................... A2-8"
SPINDLE SPEEDS .................... 25-3000 RPM
GEAR RANGES ....................... 2
TURRET CONFIGURATION .............. 12 STATION
X-AXIS ............................ 8.865"
Z-AXIS ............................ 80.9"
RAPID TRAVERSE (X-AXIS) ........... 236 IPM
RAPID TRAVERSE (Z-AXIS) ........... 472 IPM
TAILSTOCK DIA ..................... 4.3"
TAILSTOCK STROKE .................. 6.7"
MAIN MOTOR ........................ 30 HP
MACHINE WEIGHT .................... 19,000 LBS

EQUIPPED WITH:
FANUC 11T CNC CONTROL
10" 3-JAW HYDRAULIC CHUCK
HYD. STEADY REST
TAILSTOCK
CHIP CONVEYOR
ALL AVAILABLE TOOL HOLDERS
ALL AVAILABLE MANUAL
42
42" Table 1.5HP Spindle Bridgeport 2J VERTICAL MILL, Powerfeed
Our Price: $2,750.00

9" X 42" BRIDGEPORT VERTICAL MILLING MACHINE
MODEL: 2J S/N: 165040 NEW: 1974

SPECIFICATIONS:
TABLE SIZE ................................... 9" X 42"
MAXIMUM WEIGHT OF WORKPIECE ................... 750 LBS
LONGITUDINAL TABLE TRAVEL ......................... 30"
CROSS TRAVEL ...................................... 12"
QUILL TRAVEL ....................................... 5"
KNEE TRAVEL ....................................... 16"
RAM TRAVEL ........................................ 12"
MINIMUM / MAXIMUM THROAT DISTANCE .... 6-3/4" / 18-3/4"
INFINITELY VARIABLE SPEED RANGE .......... 60-4,200 RPM
SPINDLE TAPER ..................................... R-8
QUILL TRAVEL ....................................... 5"
QUILL FEEDS ................... 0.0015", 0.003", 0.006"
APPROXIMATE WEIGHT .......................... 2,000 LBS

EQUIPPED WITH:
1 1/2 HP VARI SPEED MILLING HEAD
BRIDGEPORT POWER FEED
CHROME WAYS
ONE SHOT LUBE

INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE
42
42" Table 2HP Spindle Bridgeport Series 1 VERTICAL MILL, TRAK 2-AXIS DRO
Our Price: $3,950.00

9" X 42" BRIDGEPORT VERTICAL MILLING MACHINE
MODEL: SERIES I, S/N: 12/BR 233017, NEW: 1984

SPECIFICATIONS:
TABLE SIZE ............................ 9" X 48"
MAXIMUM WEIGHT OF WORKPIECE ........... 750 LBS
LONGITUDINAL TABLE TRAVEL ............. 30"
CROSS TRAVEL .......................... 12"
QUILL TRAVEL .......................... 5"
KNEE TRAVEL ........................... 16"
RAM TRAVEL ............................ 12"
MINIMUM / MAXIMUM THROAT DISTANCE ..... 6-3/4" / 18-3/4"
INFINITELY VARIABLE SPEED RANGE ....... 60-4,200 RPM
SPINDLE TAPER ......................... R-8
QUILL TRAVEL .......................... 5"
QUILL FEEDS ................... 0.0015", 0.003", 0.006"
APPROXIMATE WEIGHT ............ 2,000 LBS

  EQUIPPED WITH:
- TRAK 2-AXIS DRO
- CHROME WAYS
- ONE SHOT LUBE

  INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE

  * * * VERY GOOD CONDITION * * *
42
42" Table 2HP Spindle Bridgeport SERIES 1 VERTICAL MILL, Vari-Speed,Dynamic Reasearch DRO, Chrome Bijur
Our Price: $5,450.00

9" X 42" BRIDGEPORT VERTICAL MILL
SERIES I, S/N: 253164, NEW: 1990

SPECIFICATIONS:
TABLE WORKING SURFACE................. 9" X 42"
NUMBER OF T-SLOTS..................... 3
RANGE: LONGITUDINAL (X)............... 30"
    CROSS (Y)...................... 12"
    VERTICAL, KNEE (Z)............. 16"
    QUILL.......................... 5"
MAX/MIN DIST. SPINDLE NOSE TO TABLE... 18-1/2"/ 2-1/2"
MAX/MIN DIST., CENTERLINE OF SPINDLE
TO FACE OF COLUMN.................... 18-3/4"/ 6-3/4"
RAM TRAVEL............................ 12"
HEAD TILT, LEFT AND RIGHT............. 45 DEGREES
HEAD TILT, FRONT TO REAR, EACH WAY.... 45 DEGREES
(3) POWER QUILL FEEDS................. .0015, .003, .006
IPR
INFINITELY VARIABLE SPINDLE SPEEDS,
TWO RANGES:
    LOW RANGE....................... 60 - 500 RPM
    HIGH RANGE ..................... 500 - 4200 RPM
SPINDLE TAPER......................... R-8
MAXIMUM COLLET CAPACITY............... 3/4"

EQUIPPED WITH:
-2 HP VARI-SPEED SERIES 1 MILLING HEAD S/N: 276662
-DYNAMIC RESEARCH 2 AXIS DIGITAL READOUT (.0002" RES)
-CHROME WAYS
-ONE SHOT LUBE

INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
42
42" Table 2HP Spindle Bridgeport SERIES I VERTICAL MILL,

9" X 42" BRIDGEPORT VERTICAL MILL
SERIES I, S/N: 203859, NEW: 1982

SPECIFICATIONS:
TABLE WORKING SURFACE................. 9" X 42"
NUMBER OF T-SLOTS..................... 3
RANGE: LONGITUDINAL (X)............... 26-1/2"
CROSS (Y)...................... 12"
VERTICAL, KNEE (Z)............. 16"
QUILL.......................... 5"
MAX/MIN DIST. SPINDLE NOSE TO TABLE... 18-1/2"/ 2-1/2"
MAX/MIN DIST., CENTERLINE OF SPINDLE
TO FACE OF COLUMN.................... 18-3/4"/ 6-3/4"
RAM TRAVEL............................ 12"
HEAD TILT, LEFT AND RIGHT............. 45 DEGREES
HEAD TILT, FRONT TO REAR, EACH WAY.... 45 DEGREES
(3) POWER QUILL FEEDS................. .0015, .003, .006
IPR
INFINITELY VARIABLE SPINDLE SPEEDS,
TWO RANGES........................... 60-500 RPM
500-4200 RPM
SPINDLE TAPER......................... R-8
MAXIMUM COLLET CAPACITY............... 3/4"

EQUIPPED WITH:
-2 HP MILLING HEAD
-CHROME WAYS
-ONE SHOT LUBE
42
42" Table 2HP Spindle Siber Hegner RB-I Bed Type VERTICAL MILL, Bed Mill,Vari-Speed,Kurt PDB, Anilam DRO, 2 HP
Our Price: $4,500.00

SIBER HEGNER VERTICAL BED TYPE MILL
MODEL: RB-1, S/N: 77010446, NEW: 1988

SPECIFICATIONS:
TABLE WORKING SURFACE .............. 9" x 42"
SPINDLE RANGE:
  SPINDLE SPEED (LOW RANGE) ......... 60 - 580 RPM
  SPINDLE SPEED (HIGH RANGE) ........ 500 - 4500 RPM
  SPINDLE TAPER ..................... R-8
  SPINDLE QUILL TRAVEL .............. 5"
TRAVELS:
  TABLE LONGITUDINAL (X) ............ 30"
  CROSS (Y) ......................... 12"
  VERTICAL HEAD (Z) ................. 16"
SPINDLE HEAD THROAT DIMENSIONS:
  SPINDLE NOSE TO TABLE SURFACE ..... 2"MIN - 20"MAX
  SPINDLE CENTER TO COLUMN .......... 16"
  HEAD TILTS ........................ 45% LEFT or 45% RIGHT
APPROX MACHINE WEIGHT .............. 2,270 LBS
APPROX FLOOR SPACE ................. 82"W x 50"D x 87"H

EQUIPPED WITH:
ANILAM TWO AXIS DIGITAL READOUT
KURT POWER DRAW BAR
LUBE SYSTEM
WORKLIGHT
2 HORSE POWER SPINDLE MOTOR
MANUALS

INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
EXCELLENT CONDITION