Machineryvalues.com

(Your shopping cart is empty)
You are here: Home > CNC Chip Making Machines > CNC Machining Centers > Horizontal Machining Centers (HMC'S) > Size
Choose a sub category:
0 - 30" 30.1" and up
Sort By:
Page of 2  
118
118" X Axis 82" Y Axis Giddings &Lewis HMC 410 HORZ MACHINING CENTER, Seimens 840D Control

New "Birmingham" Precision High Speed Engine Lathe
Model: YCL-20120  with Removable Gap Bed

FEATURES:
10 HP MAIN MOTOR
ONE PIECE CAST IRON BASE
D1-8 SPINDLE WITH 3-1/8" SPINDLE BORE
NO CHANGE GEARS REQUIRED
12 SPEEDS FROM 45 - 1,600 RPM
60 KINDS OF INCH THREADS FROM 112 - 2 TPI
47 KINDS OF METRIC THREADS FROM 0.2 - 14MM
MAIN SPINDLE HARDENED & PRECISION GROUND
BED MADE OF FINE GRAIN HIGH TENSILE CAST IRON
BEDWAYS INDUCTION HARDENED & PRECISION GROUND
ALL GEARS & SHAFTS HARDENED & PRECISION GROUND
MAIN SPINDLE SUPPORTED AT 3-POINT BY PRECISION BEARINGS

SPECIFICATIONS:
MAX. SWING OVER BED:   20"
DISTANCE BETWEEN CENTERS:   120"
MAX. EFFECTIVE CUTTING LENGTH:   116"
MAX. SWING OVER CROSS SLIDE:   11-7/8"
MAX. SWING IN GAP:   29"
EFFECTIVE LENGTH IN GAP:   6"
WIDTH OF BED:   13-3/4"
SPINDLE NOSE:   D1-8
DIAMETER OF SPINDLE THRU BORE:   3-1/8"
TAPER OF SPINDLE CENTER:   MT#7 / MT#5
SPINDLE SPEEDS, 12 STEPS: 25,35,55,80,120,170,235,350,525,700,1100,1600 RPM
LONGITUDINAL FEEDS: 35 KINDS, 0.0022" - 0.0612" REV.
CROSS FEEDS: 35 KINDS, 0.00048" - 0.01354" REV.
METRIC THREADS: 47 KINDS, 0.2 - 14MM
INCH THREADS: 60 KINDS, 112 - 2 TPI
MODULE THREADS: 39 KINDS, 0.1 - 7MM
DIAMETRAL PITCH THREADS: 50 KINDS, 4 - 112 DP
MAX. TRAVEL OF CROSS SLIDE: 12-15/16"
MAX. TRAVEL OF TOP SLIDE: 5-1/8"
4-WAY TOOL POST SIZE: 1" X 1"
LONGITUDINAL LEADSCREW DIA/PITCH: DIA. 1-5/8" / 4 TPI
DIAMETER OF TAILSTOCK QUILL: 3"
TAPER OF TAILSTOCK QUILL CENTER: MT#5
MAX. TRAVEL OF TAILSTOCK QUILL: 7"
POWER OF MAIN MOTOR: 10 HP, 230/460V/60HZ, 3 PHASE PREWIRED 230V
POWER OF COOLANT PUMP: 1/8 HP, 230/460V/60HZ, 3 PHASE PREWIRED 230V

Standard Equipment:
- FOLLOW REST
- 18" FACE PLATE
- 6-1/2" STEADY REST W/ROLLERS
- 12" 3-JAW CHUCK
- 16" 4-JAW CHUCK
- 10" DRIVE PLATE
- OPERATION & PARTS MANUAL
- COOLANT SYSTEM
- HAOLGEN WORK LIGHT
- REMOVABLE GAP
- 4-WAY TOOL POST
- THREAD CHASING DIAL
- HAND OIL PUMP FOR WAYS
- (2) DEAD CENTERS
- REDUCING SLEEVE MT7/MT5
- TOOL KIT WITH TOOLS
- 4-POSITION AUTOMATIC KICK-OUT
- LONGITUDINAL CARRIAGE STOP
- FULL LENGTH FOOT BRAKE
- FULL LENGTH SPLASH GUARD

Optional Equipment (call for pricing):
- TAPER ATTACHMENT
- 12" STEADY REST WITH ROLLER JAWS
- 5C HAND LEVER TYPE COLLET CLOSER
- DIGITAL READOUT
12
12" X Axis 12" Y Axis Kitamura HX250iF HORZ MACHINING CENTER, Fanuc 18iMB Control

2006 Kitamura HX 250 IF Horizontal Machine Centers

SPECIFICATIONS:
    Table Size - 10" x 10" (254 x 254mm)
    Travel (X,Y,Z) - 12" x 12" x 13" (305 x 305 x 330mm)
    Spindle Taper - NST No. 30
    Spindle Speed - 150 - 15,000 RPM
    Tool Storage Capacity - 40 pcs.
    Tool Change Time (T-T/CC) - 1.2 Sec/3.0 Sec
    Rapid Feed (X,Y,Z, - 1,890 IPM
    Power Requirement - 25KVA
    Fanuc 18 IMB Control

Ideal for Simultaneous 4-Axis Machining of Small Parts
Positioning Accuracy - +/-0.000078"/full Stroke   Repeatability: +/-0.000039"
Ultra-Fast 2-Pallet Rotary APC Maximizes Machining Uptime & Operator Convenience &
    Safety.
Exceptional Chip Evacuation
Rigid Meehanite Cast Iron Construction
Powerful High-Speed, Dual-Contact Spindle Ideal for Machining a Wide Range of
    Materials.  Great Low End Torque and High End Fine Finish Capability
Intelligent Advance Control System, Ballscrew Cooling Standard

INSPECT 2 MACHINES UNDER POWER

INCLUDES:  Chick Tombstones & Keller Filters
20
20" X Axis 20" Y Axis Kitamura HX300iF HORZ MACHINING CENTER, Fanuc 16iM 4th Axis Control

KITAMURA HX300IF 4 AXIS HORIZONTAL MACHINING CENTER
FEBRUARY 2006 INSTALL
PALLET SIZE 12" X 12"
X AXIS TRAVEL 20.1"
Y AXIS TRAVEL 20.1"
Z AXIS TRAVEL 19.2"
SPINDLE TAPER BT 40
SPINDLE SPEEDS 20,000
RAPID TRAVERSE 1969 IPM
COMPLETE WITH:
20,000 RPM Spindle
40 Tools (BT40)
Full 4th  Axis
Tool Setter Package B
Auto Tool Length Measurement
Auto Tool Length Offset Comp.
Cutter Breakage Detection
Tool Life Control (Tool Management)
Spare Tool Selection
External Touch Sensor
Spindle Warm-up Timer
Blum TC50 Spindle Probe
2 Extra Pallets
  
22
22" X Axis 20" Y Axis Mazak HTC-400 HORZ MACHINING CENTER, Fusion 640M Control
Our Price: $49,500.00

MAZAK HTC400 CNC HORIZONTAL MACHINING CENTER
  1999

SPECIFICATIONS:

Pallet Size                              15.7" x 15.7"
Table Load Capacity           660 LBS.
Axis Travel X - Axis            22.05"
            Y - Axis                      20.08"
            Z - Axis                      20.08"
Table Indexing                            360 positions
Spindle Center To Table Top   2.8" - 22.8"
Spindle Nose To Table Center 5.9" - 25.98"
Spindle Drive Motor                  15 HP
Spindle Taper                             CAT 40
Spindle Speeds                           10,000 RPM
Rapid Traverse Rate                  1181 IPM X,Y,Z
Auto Tool Change                     30 ATC
Max Tool Dia.                              3.5 "/4.5"
Max Tool Weight                       17.6 LBS.
Max Tool Length                        14.96"

EQUIPPED WITH:

MAZATROL FUSION 640M CNC CONVERSATIONAL CONTROL
2 Pallet Changer
Pallet Edge Locators
Programmable Coolant Nozzle
Auto Power On/Off/Warm Up
Niagara Coolant System
Through Spindle Coolant
Chip Conveyor w/ dual Augers
3.5" Floppy Disk Drive
G00 Slope Constant
Rigid Tapping
Helical Interpolation
RS-232C Interface
Tool Life Monitoring
Backround Tool Path Check
EIA/ISO Input Function
Multi-Tap Transformer
IC Memory Card Interface
PCMCIA Interface - 2 Slots
22
22" X Axis 24" Y Axis Mazak FH4800 (3) Machine FMS 12 Pallets HORZ MACHINING CENTER, Fusion 640M 4th Axis Controls

LARS GORTON UNIVERSAL CUTTER GRINDER

  MODEL: 375-3     S/N: 30539     NEW: 1945

  SPINDLE DRIVE MOTOR ............................ 1/4 HP
SPINDLE SPEEDS:
HIGH ...................................... 3,230 RPM
LOW ....................................... 1,440 RPM
MAXIMUM WHEEL DIAMETER ............................. 6"
MAXIMUM COLLET DIAMETER .......................... 5/8"
SOLID SLEEVE TO ........................... 1" DIAMETER

APPROXIMATE FLOOR SPACE .............. 25" X 31" X 48"H
APPROXIMATE WEIGHT ............................ 450 LBS

  ** THE TOTALLY VERSATILE MODEL 375 WILL ACCURATELY
GRIND SINGLE-FLUTE CUTTERS UP TO 1" DIAMETER. WITH
THE "717" TOOL HEAD, THE MACHINE WILL GRIND SQUARE,
BALL-NOSE, OR CORNER RADIUS SHAPES ON SINGLE AND
MULTI-FLUTED CUTTERS, AS WE;; AS CONICAL SHAPED
STRAIGHT-FLUTED CUTTERS, TOOL BITS & TAP LEAD
REGRINDING.**

  EQUIPPED WITH:
"717" TOOL HEAD - INDEPENDENT RADIAL & AXIAL
  CLEARANCE SETTING. ANY PREDETERMINED GRINDING
  ANGLE, RADIUS OR DIAMETER MAY BE OBTAINED WITH
  ANY SHAPE OR CLEARANCE
COMPLETE WITH COLLETS & DRAW BAR
PEDESTAL BASE

** THIS IS ACTUALLY A VERY GOOD, USEABLE MACHINE
   FOR UNDER A GRAND! **

*INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE*
24.8
24.8" X Axis 23.6" Y Axis Mori Seiki SH-50 w/ 3 Pallets HORZ MACHINING CENTER, MSC516 - Fanuc Control
Our Price: $49,500.00

MORI-SEIKI SH-50 CNC HORIZONTAL MACHINING CENTER
  NEW: 1996

SPECIFICATIONS:

PALLET DIMENSIONS...................... 19.7" x 19.7"
NUMBER OF PALLETS...................... 3
TABLE LOAD CAPACITY.................... 2,200 LBS.
MAXIMUM WORKPIECE SIZE D X H........... 28.7" x 26.8"
AXIS TRAVELS X - AXIS.................. 24.8"
             Y - AXIS.................. 23.6"
             Z - AXIS.................. 25.6"
             B - AXIS.................. 1 Degree
SPINDLE CENTER TABLE TOP............... 2.0" - 25.6"
TABLE CENTER TO SPINDLE................ 5.9" - 31.5"
SPINDLE MOTOR 30 MIN./CONT............. 30/24.8 HP
SPINDLE NOSE........................... CAT #40
SPINDLE SPEED.......................... 12,000 RPM
RAPID TRAVERSE......................... 1260 IPM
TOOL MAGAZINE CAPACITY................. 60 ATC
MAX. TOOL DIAMETER/LENGTH/WEIGHT....... 5.9"/14.2"/26.4"
TOOL CHANGE TIME TOOL TO TOOL.......... 1.3 SECS.
MACHINE WEIGHT......................... 33,800 LBS.

EQUIPPED WITH:

MSC-516 CNC CONTROL
3 PALLET CHANGER
CHIP CONVEYOR
COOLANT THRU SPINDLE
HELICAL
FLOOD COOLANT
ALL AVAILABLE MANUALS
24.8
24.8" X Axis 23.6" Y Axis Mori Seiki SH503 w/ 50 Taper HORZ MACHINING CENTER, Fanuc Control

MORI SEIKI SH503/50 CNC HORIZONTAL MACHINING CENTER
2001

CONTROL:                   FANUC CONTROL
PALLET SIZE:               (2) 19.7" X 19.7"
TRAVELS:
  X-AXIS:                   24.8"
  Y-AXIS:                   23.6"
  Z-AXIS:                   33.5"
  B-AXIS:                   1 DEGREE INDEX
SPINDLE SPEEDS:            10,000 RPM
SPINDLE TAPER:             50 TPR
RAPID TRAVERSE:            1,653.5 IPM
TOOL CAPACITY:             60 ATC
MACHINE SIZE:              118" 220"
MACHINE WEIGHT:            33,242 LBS

EQUIPPED WITH:
  
COOLANT THROUGH
FANUC CONTROL
60 TOOL ATC
HYDRAULIC CLAMPING
ALL AVAIABLE TOOLING AND MANUALS
24.8
24.8" X Axis 26.4" Y Axis Mori Seiki NH5000DCG HORZ MACHINING CENTER, Mori (Fanuc) MSG-501 Control

MORI SEIKI NH5000/40 CNC HORIZONTAL MACHINING CENTER
2003

SPECIFICATIONS:

Number of Pallets 2
Pallet Size 19.7" x 19.7"
Axis Travel X - Axis 24.8" Y - Axis 26.4" Z - Axis 25.8"
Max. Workpiece Swing Dia. 24.7"
Table Surface To Spindle Center 2.0" - 25.8"
Table Center To Spindle 3.9" - 30.3"
Max. Workpiece Height 35.4"
Max. Table Load 1,100 LBS.
Table Indexing    1 Degree
B-Axis Time 2.0 SEC.
Rapid Traverse Rate X,Y,Z Axes 1968 IPM
Spindle Speed Range 14,000 RPM
Spindle Taper CAT# 40
Spindle Motor 30 HP AC
Auto Tool Change 120 ATC
Max Tool Length 15.7"
Max Tool Dia. (adj.) 3.1"/7.0"
Max Tool Weight 17.6 LBS"
Tool Change Time (tool to tool) 1.0 Sec.
Pallet Change Time 3.2 Sec.
Machine Weight 27,800 LBS.

Equipped With:

FANAC MSG 501 CNC CONTROL
AUTO CENTERING & MEASURING SYSTEM
COOLANT THRU THE SPINDLE
EXTENDED PART PROGRAM EDITING  
CHIP CONVEYOR SYSTEM
RIGID TAPPING
ALL AVAIALBLE MANUALS
Horizontal Machining Centers (Hmc'S), Mazak Fh5800 W/ 6 Pallets Mazatrol Fusion 640M Control
28" X Axis 24" Y Axis Mazak FH5800 w/ 6 Pallets HORZ MACHINING CENTER, Mazatrol Fusion 640M Control

MAZAK FH5800 CNC HORIZONTAL MACHINING CENTER
2000

SPECIFICATIONS:

Number of Pallets                     6
Pallet Size                                       19.68"X 19.68"
Axis Travel X - Axis                     27.95"
                            Y - Axis                     24.02"
                            Z - Axis                     25.98"
Maximum Weight of Workpiece   1100 lbs.
Spindle Center To Table Top          1.96" - 25.98"
Spindle Nose To Table Center       5.91" - 31.89"
Spindle Drive Motor                   30 HP AC
Spindle Taper                                   CAT #40
Spindle Speeds                                 12,000 RPM
Rapid Traverse Rate                   1968 IPM X,Y,Z
Maximum Cutting Rate             1968 IPM X,Y,Z
Auto Tool Change Capacity    120 ATC
Max. Tool Length                         14.17"
Max. Tool Diameter                    5.740"
Max. Tool Weight                         26 lbs.
Machine Weight                            27,400 LBS.


EQUIPPED WITH:

MAZATROL FUSION 640M CONTROL
1 DEG. INDEXING
HIGH PRESSURE COOLANT THRU SPINDLE
CHIP CONVEYOR
PALLETECH PREP
MONITORING SYSTEM B
ALL AVAILABLE TOOLING
ALL AVAILABLE MANUALS
28.74
28.74" X Axis 28.74" Y Axis Mazak HCN5000 HORZ MACHINING CENTER, Fusion 640M 4th Axis Control

  LARS GORTON UNIVERSAL CUTTER GRINDER

MODEL: 500CG      S/N:  86G76406      NEW: 1986      

** WILL GRIND SINGLE FLUTE CUTTERS - HIGH SPEED STEEL,
  COBALT OR CARBIDE UP TO 1/2" DIAMETER SHANK.  THE MACHINE
  WILL GRIND BALL NOSE, CORNER RADIUS, CONICAL, CONICAL WITH
  A BALL AND A SQUARE NOSE SINGLE FLUTE CUTTERS.  MANY
  PREDETERMINED ANGLES, RADII OR DIAMETERS MAY BE OBTAINED.

TOOL HEAD:
MAX. COLLET SIZE ............................. 1/2"
COLLET HOLDER PIVOT .......................... +/- 15 DEG.
NUMBER OF INDEXES ............................ 12

RANGE:
HORIZONTAL SHAFT
  LONGITUDINAL LINEAR MOVEMENT ................ 3.375"
TOOL HEAD ASSEMBLY
  LONGITUDINAL LINEAR MOVEMENT ................ 1.5"
  CROSS LINEAR MOVEMENT - TO RIGHT ............ 1/2"
  CROSS LINEAR MOVEMENT - TO LEFT STOP ........ 0.044"
  CROSS LINEAR MOVEMENT - TO LEFT W/O STOP .... 1/2"
  VERTICAL PIVOT - BETWEEN STOPS .............. 90 DEG. MAX.
  VERTICAL PIVOT - STOPS REMOVED .............. 180 DEG. PLUS
  HORIZONTAL SHAFT PIVOT ...................... 50 DEG. MAX.

DRESSER:
  FINE MICROMETER ADJUSTMENT .................. 0.312"
  COURSE CLAMP ADJUSTMENT W/DIAMOND ........... 1.120" MAX.

WHEEL CAPABILITIES:
DIAMETER .................................... 4"
WIDTH ....................................... 1- 1/2" MAX.
BACK (FOR MOUNTING .......................... 3/8"
MAX. SPEED .................................. 5,730 SFPM

DRIVE TRAIN:
MOTOR H.P. ................................... 1/4 H.P.
MOTOR SPEED .................................. 1,725 RPM
SPINDLE SPEED ................................ 5,500 RPM
ELECTRICS .................................. 115 VOLTS/1/60

APPROX. DIMENSIONS ........................ 24" X 35" X 13"H
APPROX. WEIGHT ............................... 150 LBS.

EQUIPPED WITH:
MULTI-SLIDE DESIGN TOOL HEAD W/MICROMETER POSITIONING
  OF SPINDLE CARRIER
SLIDE LOCKS FOR EACH ADJUSTABLE SLIDE MEMBER
INDEPENDENT ADJUSTMENTS FOR RADIAL & END CLEARANCES
EXTRA GRINDING WHEELS
ASSORTMENT OF COLLETS
NICE CABINET BASE

** MADE IN U.S.A **
** PARTS & SERVICE AVAILABLE FROM THE LARS CORP. IN RACINE,
   WI (262) 654-3516 **
*** NEW PRICE TODAY IS $9,880 **

** LIKE NEW CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **