Machineryvalues.com

(Your shopping cart is empty)

Search
You are here: Home > CNC Chip Making Machines > CNC Machining Centers > Horizontal Machining Centers (HMC'S) > Size > 30.1" and up
Sort By:
Page of 2  
118
118" X Axis 63" Y Axis LeBlond-Makino HMC3016 HORZ MACHINING CENTER, Fanuc 15M Control

LEBLOND-MAKINO HNC3016 HORIZONTAL MACHINING CENTER
1995

SPECIFICATIONS:

Travels - X: 118"   Y: 63"  Z: 51.2"
Work Table Size - 133.9 x 47.2"
Load Capacity - 55,000 lbs.
Spindle Drive - 40 HP AC Duty Rated 30 Min.
                30 HP Continuous
Spindle Speeds - 10 - 4,000 RPM
Spindle Speed Ranges - 2
Spindle Temperature Controller - Oilmatic
Spindle Taper - CAT 50
Feed Range - .04-157 IPM
Rapid Traverse - 283 IPM
Automatic Tool Changer - 60 ATC
Tool Change Time - 7 Seconds
Max Tool Size (D/L) - 7.87 x 21.625"
With all Pockets full - 5.12"
Air Supply Required - 70 PSI

EQUIPPED:

Fanuc 15M Control
ATLM
Adaptive Control
Spare Tool Selection
Rigid Tapping
Additional Work Offsets
Coolant Thru Spindle
1,050' Program Storage
Work Area Enclosure
Renishaw MP7 Probe
Scales
Tool Magazine Pendant
All Manuals

INSPECT UNDER POWER!!!

MACHINE IS PERFECT WITH ONLY 4845 SPINDLE HOURS...
118
118" X Axis 82" Y Axis Giddings &Lewis HMC 410 HORZ MACHINING CENTER, Seimens 840D Control

New "Birmingham" Precision High Speed Engine Lathe
Model: YCL-20120  with Removable Gap Bed

FEATURES:
10 HP MAIN MOTOR
ONE PIECE CAST IRON BASE
D1-8 SPINDLE WITH 3-1/8" SPINDLE BORE
NO CHANGE GEARS REQUIRED
12 SPEEDS FROM 45 - 1,600 RPM
60 KINDS OF INCH THREADS FROM 112 - 2 TPI
47 KINDS OF METRIC THREADS FROM 0.2 - 14MM
MAIN SPINDLE HARDENED & PRECISION GROUND
BED MADE OF FINE GRAIN HIGH TENSILE CAST IRON
BEDWAYS INDUCTION HARDENED & PRECISION GROUND
ALL GEARS & SHAFTS HARDENED & PRECISION GROUND
MAIN SPINDLE SUPPORTED AT 3-POINT BY PRECISION BEARINGS

SPECIFICATIONS:
MAX. SWING OVER BED:   20"
DISTANCE BETWEEN CENTERS:   120"
MAX. EFFECTIVE CUTTING LENGTH:   116"
MAX. SWING OVER CROSS SLIDE:   11-7/8"
MAX. SWING IN GAP:   29"
EFFECTIVE LENGTH IN GAP:   6"
WIDTH OF BED:   13-3/4"
SPINDLE NOSE:   D1-8
DIAMETER OF SPINDLE THRU BORE:   3-1/8"
TAPER OF SPINDLE CENTER:   MT#7 / MT#5
SPINDLE SPEEDS, 12 STEPS: 25,35,55,80,120,170,235,350,525,700,1100,1600 RPM
LONGITUDINAL FEEDS: 35 KINDS, 0.0022" - 0.0612" REV.
CROSS FEEDS: 35 KINDS, 0.00048" - 0.01354" REV.
METRIC THREADS: 47 KINDS, 0.2 - 14MM
INCH THREADS: 60 KINDS, 112 - 2 TPI
MODULE THREADS: 39 KINDS, 0.1 - 7MM
DIAMETRAL PITCH THREADS: 50 KINDS, 4 - 112 DP
MAX. TRAVEL OF CROSS SLIDE: 12-15/16"
MAX. TRAVEL OF TOP SLIDE: 5-1/8"
4-WAY TOOL POST SIZE: 1" X 1"
LONGITUDINAL LEADSCREW DIA/PITCH: DIA. 1-5/8" / 4 TPI
DIAMETER OF TAILSTOCK QUILL: 3"
TAPER OF TAILSTOCK QUILL CENTER: MT#5
MAX. TRAVEL OF TAILSTOCK QUILL: 7"
POWER OF MAIN MOTOR: 10 HP, 230/460V/60HZ, 3 PHASE PREWIRED 230V
POWER OF COOLANT PUMP: 1/8 HP, 230/460V/60HZ, 3 PHASE PREWIRED 230V

Standard Equipment:
- FOLLOW REST
- 18" FACE PLATE
- 6-1/2" STEADY REST W/ROLLERS
- 12" 3-JAW CHUCK
- 16" 4-JAW CHUCK
- 10" DRIVE PLATE
- OPERATION & PARTS MANUAL
- COOLANT SYSTEM
- HAOLGEN WORK LIGHT
- REMOVABLE GAP
- 4-WAY TOOL POST
- THREAD CHASING DIAL
- HAND OIL PUMP FOR WAYS
- (2) DEAD CENTERS
- REDUCING SLEEVE MT7/MT5
- TOOL KIT WITH TOOLS
- 4-POSITION AUTOMATIC KICK-OUT
- LONGITUDINAL CARRIAGE STOP
- FULL LENGTH FOOT BRAKE
- FULL LENGTH SPLASH GUARD

Optional Equipment (call for pricing):
- TAPER ATTACHMENT
- 12" STEADY REST WITH ROLLER JAWS
- 5C HAND LEVER TYPE COLLET CLOSER
- DIGITAL READOUT
31.5
31.5" X Axis 25.6" Y Axis Mori Seiki MH500 HORZ MACHINING CENTER, MSC502 (Fanuc) Control

MORI SEIKI MH 500 CNC HORIZONTAL MACHINING CENTER
1999

SPECIFICATIONS:

Pallet Size                        19.7" x 19.7"
Max Workpiece Swing Dia. Height    35.4" x 35.4"
Table Surface To Spindle center    2.0" - 27.6"
Table Center To Spindle Gage Plane 5.9" - 35.4"
Number of Pallets                  2
Pallet Change Time                 9.0 Sec.
Table Load Capacity                2,200 LBS.
Axis Travel X - Axis               31.5"
            Y - Axis               25.6"
            Z - Axis               29.5"
Table Indexing                     1 INDEX
Spindle Drive Motor                25 HP AC (2 GEAR RANGE)
Spindle Taper                      #50 Cat
Spindle Speeds                     6,000 RPM
Rapid Traverse Rate                787.4 IPM
Cutting Feed Rate                  .01 - 197 IPM
Auto Tool Change Capacity          60 ATC
Chip To Chip Tool Change Time      6.2 SECS.
Max Tool Weight                    66 LBS.
Max Tool Length                    19.7"
Max Tool Dia.                      4.7"

EQUIPPED WITH:

FANUC MSC502 CNC CONTROL
320 Meters Of Memory
Renishaw Probe
48 Additional Work Coordinates
99 Tool Offsets
Process Completion Lamp
Thru Spindle Coolant
Oil Hole Drill Coolant
Tool Breakage Detection
Rigid Tapping
Helical Interpolation
Full Enclosure
External Chip Conveyor
All Available Manuals
34.3
34.3" X Axis 28" Y Axis Kitamura HX500 HORZ MACHINING CENTER, Fanuc 16i 4th Axis Control

KITAMURA HX500
2000

Travels:
X...................: 34.3"
Y...................: 28"
Z...................: 26"
SPINDLE SPEED ......: 12,000 RPM
SPINDLE TAPER ......: Cat #50
PALLET SIZE.........: 19.7" x 19.7"
PALLET LOAD ........: 1,760 LBS.
PALLET INDEX .......: 360,000 DEGREE
RAPIDS .............: 1936 IPM
TOOL CHANGER .......: 50 ATC
MAX. TOOL LENGTH....: 17.700
MAX. TOOL DIAMETER..: 7.900
MAX. TOOL WEIGHT....: 44.00
TOOL CHANGE TIME....: 2.00
CHIP-to-CHIP TIME...: 6.00

Equipped With:

Fanuc 16iM 4th Axis Control
High Pressure Coolant Through Spindle
Chip Conveyor
Full 4th Axis
Dual Ballscrews
Machine Dimensions: 122.6"x191.9"x132.8"
Weight: 44,440 Lbs.
39.3
39.3" X Axis 31.5" Y Axis Okuma MC600H HORZ MACHINING CENTER, OSP7000M

Okuma MC-600H Horizontal Machining Center
1996

Specifications:
Pallet size (2).................................... 25" x 25"
Table rotation................................... 1° index
Longitudinal travel (X axis)............. 39.3"
Vertical travel (Y axis)..................... 31.5"
Transverse travel (Z axis)............... 29.5"
Spindle taper.................................... CAT-50
Number of Tools.............................. 72 ATC
Spindle speeds (in two ranges)........ 10 - 5000 rpm
Max. tool diam. (w/adjacent)........... 5.31"
Max. tool diam. (w/o adjacent)........ 9.06"
Max. tool length............................... 21.65"
Max. tool weight............................... 25 lb.
Cutting feed rate............................... 0 - 394 ipm
Rapid traverse rates (X-Y/Z)........... 787/709 ipm
Spindle motor (30min/cont)............... 30/20 hp
Dimensions........................... 256"W x 164"D x 139"H
Weight (approx.)............................... 50,600 lb.

Equipped with:
  
Okuma OSP-7000M CNC control
RS232
Set Up For Renishaw Probe
2 Pallet changer w/ 1° auto. index table
Helical Interpolation
Synchronous tapping

39.37
39.37" X Axis 31.49" Y Axis Doosan HM630 HORZ MACHINING CENTER, Fanuc 18iM Control

One (1) 1997 Mazak M-5 2000

Mazatrol T-PLUS

LATHES, CNC, 2-AXIS, UNIVERSAL

Capacity: Swing / Swing Over Cross Slide  24" / 19"

Maximum Turning Diameter / Maximum Turning Length  13.75" / 80"

Distance Between Centers  80"

Spindle: Spindle Speeds Minimum - Maximum  6 - 1,000 RPM

Spindle Bore / Bar Capacity / Nose  6.5" / 6.5" / A2-15

Main Motor (30 min / continuous)  30 / 25 HP

Turret: Number of Positions Vertical / Horizontal Turret  8 / 6 Stations

X-Axis Travel  22"

Z-Axis Travel  85"

Tailstock: Stroke of Body / Quill  88" / 5.1"

Quill Diameter / Taper  3.9" / MT # 5

Rapids: Rapid Traverse (X / Z )  597 IPM

Dimensions: Floor Space (L x W x H)  235" x 72" x 90"

Weight (approx.)  16,000 Lbs
-
ADDITIONAL INFO:
  22" 3-Jaw SMW Air Chuck

  Chip Conveyor

  Steady Rest

39.37
39.37" X Axis 37.4" Y Axis Okuma MA600HB Space Center HORZ MACHINING CENTER, OSP P200M Control

OKUMA SPACE CENTER MA600HB HMC
NEW 2006

ONLY 48 CUTTING HOURS!!!

SPECIFICATIONS
MAXIMUM MACHINING CAPACITY:    39.37" X 35.43" X 39.37"
MAXIMUM WORKPIECE SIZE:       39.37" X 39.37"

TRAVELS
X-AXIS:                39.37"
Y-AXIS:                37.40"
Z-AXIS:                39.37"
SPINDLE END TO PALLET CENTER:    2.76" - 42.13"

TABLE
PALLET SIZE (2):             24.80" X 24.80"
INDEX POSITIONS:             360 POSITIONS
MAXIMUM LOAD CAPACITY:       2,640 LBS

SPINDLE
SPINDLE SPEED RANGE:          50 TO 6,000 RPM
NUMBER OF SPINDLE SPEED RANGES:    INFINITELY VARIABLE
BORE TAPER:             CT 50

FEEDRATE
RAPID FEEDRATE (X, Y, Z AXIS):       2,362.20 IPM
JOG FEEDRATES (X, Y, Z AXIS):       0.04 TO 2,362.20 IPM

ATC
TOOL SHANK SYSTEM:          CAT #50
TOOL MAGAZINE CAPACITY:       60 TOOLS
MAXIMUM TOOL DIAMETER:       5.51"/9.45"
MAXIMUM TOOL LENGTH:       17.72"
MAXIMUM TOOL WEIGHT:       55 LBS

MOTOR
SPINDLE DRIVE (10 MIN/CONT):       40/35 HP WIDE RANGE

MACHINE HEIGHT:             129.57"
FLOOR SPACE:             136.22" X 238.35"
MACHINE WEIGHT:             52,800 LBS

ELECTRICS:    MULTI-TAP TRANSFORMER IN 480, 440, 415, 380V                      OUT 200, 210, 220V

EQUIPPED WITH

OKUMA OSP-P200M CONTROL
TOOL BREAKAGE DETECTION
SHOWER COOLANT
LIFT UP CHIP CONVEYOR
CYCLE TIME REDUCTION
SIMPLE LOAD MONITOR
TOOL LIFE MANAGEMENT
USER TASK II
MULTI-TAP TRANSFORMER
SCHEDULE PROGRAMMING
HELICAL CUTTING
COOLANT THRU SPINDLE - 213 PSI
39.4
39.4" X Axis 31.5" Y Axis Kitamura HX630i HORZ MACHINING CENTER, Fanuc 16MB Control

MIYANO BNC-34T CNC TURNING CENTER
NEW: 1988       S/N:BN30422T

CNC CONTROL: FANUC OT
BAR CAPACITY, RD.: 1-5/16"
MAX. TURNING DIA.: 4-3/4"
MAX. WORK LENGTH: 7-7/8"
MAX. CHUCK WORK LENGTH: 9"
VARIABLE SPEED RANGE: 170 TO 5,000 RPM
SPINDLE MOTOR, 30 MIN. RATING: AC 10 HP (AC 7.5 kW)
TOOLING STATIONS: 6
TOOL HOLE DIAMETER: 1"
CUTTING TOOL SHANK SIZE: 3/4"
MAX. SLIDE STROKE, X-AXIS: 3-7/8"
Z-AXIS: 11-3/8"
SUB TURRET: (T-TYPE)
TOOLING STATION: 6
SLIDE STROKE (B-AXIS): 9"
TURRET INDEX TIME: 0.5 SEC/1 POS.
DIMENSIONS (APPROX.): 59"W X 100"L X 67"H
WEIGHT (APPROX.): 6200 LBS

EQUIPPED WITH:
- FANUC 0T CNC CONTROL
  - STANDARD 12' MIYANO BARFEED
  - ALL AVAILABLE TOOLHOLDERS
39.4
39.4" X Axis 31.5" Y Axis Mitsubishi MH60D HORZ MACHINING CENTER, Mitsubishi Control
Our Price: $29,500.00

MITSUBISHI MH60D CNC HORIZONTAL MACHINING CENTER
1996

SPECIFICATIONS:

PALLET SIZE                  24.75"x 24.75"
NUMBER OF PALLETS            2
AXIS TRAVEL X - AXIS         39.4"
            Y - AXIS         31.5"
            Z - AXIS         31.5"
            B - AXIS         1 DEGREE
SPINDLE NOSE TO TABLE CENTER 5.9" - 37.4"
SPINDLE DRIVE MOTOR          25/20 HP AC
SPINDLE TAPER                CAT # 50
SPINDLE SPEEDS               4,000 RPM
RAPID TRAVERSE RATE          797 IPM X,Y,Z
CUTTING FEED RATE            .04 - 397 IPM
AUTO TOOL CHANGE CAPACITY    40 ATC
MAX TOOL WEIGHT              33 LBS.
MACHINE WEIGHT               32,500 LBS.

EQUIPPED WITH:

MITSUBISHI 520M CNC CONTROL
HELICAL INTERPOLATION
SPINDLE CHILLER
THRU SPINDLE COOLANT
RIGID TAPPING
ALL AVAILABLE MANUALS
41.3
41.3" X Axis 34.4" Y Axis Hyundai HX630 HORZ MACHINING CENTER, Fanuc 18iMC

HYUNDAI-KIA HX630 CNC HORIZONTAL MACHINING CNETER
2006

Pallet Size 24.8" X 24.8"
Number of Pallets 2
Axis Travel X - Axis 41.3"
Y - Axis 34.4"
Z - Axis 34.4"
B - Axis 1
Spindle Speeds 8000 RPM
Foot LBS. of Torque 677 FT. LBS.
Spindle Speed Ranges 2 gear ranges
Spindle Taper CAT #50
Rapid Traverse Rate 1969 X,Y,Z, IPM
Tool Change Time 5.5 SEC
Auto Tool Change 60 ATC
Max. Tool Dia. 9.6"
Max. Tool Length 23.6"
Max. Tool Weight 77 LBS.
Spindle Motor 30 HP AC
Machine Weight (Approx.) 52,000 LBS

EQUIPPED WITH

FANUC 18iMC CNC CONTROL W/GRAPHICS
BIG PLUS SPINDLE
HELICAL INTERPOLATION
INCH/METRIC
1000 PSI THRU THE SPINDLE COOLANT SYSTEM
RIGID TAPPING
SPINDLE LOAD METER
SPINDLE RPM METER
OVERRIDE METER
BUILT-IN CHIP AUGAR SYSTEM
FULL ENCLOSURE
CHIP CONVEYOR
ALL MANUALS