Used Machinery and New Industrial Metalworking Machines

Search

Service

Click Here to Inquire About Buying or Selling a Machine

You are here: Home > Availability > In Stock

Sort By:

Page of 264

14" Blade 3 HP Scotchman CPO 350 COLD SAW, 2 Speed

Our Price: $5,395.00

MODEL CPO-350 2-SPEED COLD SAW
STANDARD FEATURES
Manual Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
Miter Locking Device Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
Capable of Slotting
Two Cutting Speeds: 22 & 44 RPM
Double Reduction, Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
7 Gallon Coolant Tank with Pump
30" Material Length Stop
One 12-1/2" Diameter (315 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt/3 Phase Electrics (must specify voltage)
Warranty: One Year Parts
Made in USA

Capacities & Specifications

Cutting Speeds LT (Low Turn) designed for solid mild steel, solid
stainless steel & thick wall pipe (Must specify when ordering):
LT (Low Turn) 22 RPM or 44 RPM
Motor Rate: 3 hp
Factory Wired (Specify): 208 3 ph - 230 3 ph - 460 4 ph - 575 volt 3 ph 60 hz

TUBING 90 DEGREES:
Round: 4-7/8"
Square: 4-1/2" x 4-1/2"
Rectangle: 5-1/2" x 4"

TUBING 45 DEGREES:
Round: 4-3/8"
Square: 4" x 4"
Rectangle: 4" x 4"

SOLID 90 DEGREES:
Round: 2"
Square: 2" x 2"

SOLID 45 DEGREES:
Round: 1-3/4"
Square: 1-3/4" x 1-3/4"

Max Dia Blade: 14"
Arbor Bore: 1-9/16"
Pin Spacing: 4/12/64
Width: 21-7/8"
Depth: 43-1/2"
Height Not Including Handle: 56-1/4"
Height From Floor To Vise: 37-7/16"
Shipping Weight: 675 lbs.

49" Table 3HP Spindle Birmingham BPV-3949 Vari-Speed Head VERTICAL MILL, 3 HP 220/440/3/60

Our Price: $7,150.00

New "Birmingham" Knee Type Milling Machine
Model: BPV-3949

Made in Taiwan
9" x 49" Hardened and ground table and T slots
3 HP (3 phase)
Infinitely variable spindle speeds
Class 7 spindle bearings
Dovetail ways
Turcite B on ways for smooth movement
Dual saddle locks and dual knee locks
Large easy to read chrome satin dials
Distance from spindle nose to table surface - 2-18"
Distance from spindle center to column surface - 6-3/4 - 18-3/4"
Spindle speeds 60-4300 RPM
Spindle taper - R-8
Quill dia. - 3-3/8"
Spindle motor, 3 HP - 3 phase 220 or 440 Volt
Net weight - 2,400 lbs.

Standard Accessories:
Hardened & ground ways (X & Y)
Chromed quill-honed head
Drawbar/service wrench
Hardened & ground table
Coolant sump in column
Coolant drain in base
Front & rear chip guard
One-shot lubrication
Double knee locks-ratchet style
Chromed turn-in-the hand handles
Operation/service manual
MEEHANITE CASTINGS

20" Swing 80" Centers Birmingham DLC-2080 Special Deal ENGINE LATHE, 10 HP, 16 Speed, 4-1/8" Spindle Bore

Our Price: $14,750.00

New "Birmingham" Precision High Speed Engine Lathe
Model: DLC-2080 w/Removable Gap Block
Note: the photo shows the 26" x 80" centers model
Special deal includes Free Delivery to all the lower 48
States and a Free Taper Attachment (installed)

10 HP motor delivers power thru all spindle speeds
Spindle gears, shafts and bearings are lubricated by pumped bath of oil
Induction hardened and ground bedways
D1-8 Camlock spindle with 4-1/8" spindle bore
16 Spindle speeds, 26 - 1,700 RPM
Rapid power traverse to carriage and cross slide
Multiple disc clutch for efficient spindle starting and reversing
Equipped with leadscrew cover

SPECIFICATIONS:
Swing over bed: 20"
Swing over cross slide: 11-3/8"
Swing over gap: 30"
Length of gap: 10"
Distance between centers: 80"
Spindle Bore: 4-1/8"
Spindle nose type (Camlock): D1-8
Spindle taper: MT-6
Spindle speeds: 16
Spindle speed range: 26 - 1,700 RPM
Spindle center to bedway: 9-3/4"
Threads per inch (No.) range (TPI): (42) 7/16 - 80
Metric threads (No.) range (mm): (37) 0.5 - 80
Module threads (No.) range (mm): (32) 0.25 - 40
Diametral threads (No.) range (DP): (42) 7/8 - 160
Long. feeds (No.) range (in/rev): (45) 0.0017 - 0.058
Cross feeds (No.) range (in/rev): (45) 0.0009 - 0.029
Leadscrew diameter (in): 1-9/16"
Leadscrew TPI: 2
Feed rod diamter: 1" Hex
Tooling size: 1" x 1"
Compound slide travel: 5-7/8"
Cross slide travel: 13-3/4"
Tailstock taper: MT-5
Quill travel: 6"
Quill diameter: 3"
Main drive: 10 hp, 220/440V 3 ph
Maximum workpiece weight: 1,100 lbs.
New Weight Approx: 5090 Lbs.

Standard Equipment:
12" 3 Jaw Chuck with reversible jaws
16" 4-Jaw Chuck
19" Face plate
10" Back plate
Steady rest capacity 1-1/8 - 7-7/8"
Follow rest capacity 3/4" - 4"
Dead centers, MT-4
Center sleeve, MT-6 to MT-4
Foot Brake
Threading Dial
Coolant System w/Full Length Splash Guard
Halogen work lamp
Leveling pads
Toolbox with tools

Optional Equipment (call for pricing):
Taper attachment
12" Cap. Larger steady rest with roller jaws
5C Hand lever type collet closer "JFK" USA
Quick Change tool post set
DRO - Newall or Acu-Rite

4.33" Spindle 118" X Axis Champion 110HB-T3000 HORIZONTAL BORING MILL, Fanuc 18iM, T-Type Construction

Brand New Champion Model 110HB-T3000
CNC T-Type Horizontal Boring Mill

Standard features:
Fanuc 18i (Siemens 840D) CNC Control
T-shaped bed design - with this style machine, the table
  is always traveling on the bed, this arrangement
  provides extremely high rigidity and accuracy.
The spindle is equipped with an automatic tool unloading
  device.
Extra wide hardened and ground steel box-ways,
The saddle surfaces are lined with a low-friction
  plastic, and the side faces are equipped with
  linear rolling blocks providing extremely low
  friction and high positioning accuracy.
AC motors and THK ball-screws are used on all linear axes.
Double-worm gear construction is provided for the
  B axis (rotary table) to eliminate any backlash.
The rotary table is equipped with encoder feedback.

SPECIFICATIONS:
SPINDLE DIAMETER .............................. 4.3"
SPINDLE SPEEDS (MAX.) ....................... 2500 RPM
SPINDLE TAPER .................................... ISO#50 TAPER
SPINDLE MOTOR ................................... 30 HP
SPINDLE TRAVEL (W-AXIS) .................... 21.6"
TABLE CROSS TRAVEL (X-AXIS) ............. 118"
VERTICAL TRAVEL OF SPINDLE (Y-AXIS). 59"
COLUMN TRAVEL IN & OUT (Z-AXIS) ...... 47.2"
TABLE SIZE (BUILT-IN ROTARY) ............ 55" X 49"
4th AXIS ROTARY TABLE POSITIONING . 360,000 Positions
TABLE LOAD CAPACITY ........................ 11,000 LBS.
TABLE FEED ROTATIONAL FEED RATE ... 0-1.5 RPM
TABLE RAPID TRAVEL RATE ................... 2.5 RPM
FEED RATE ........................................... 0.04 - 236.4 IPM
RAPID TRAVERSE RATE ......................... 354 IPM  (X, Y & Z)
POSITIONING ACCURACY ...................... .0003" (X, Y & Z)
POSITIONING REPEATABILITY ............... .00019" (X, Y & Z)
ROTATIONAL ACCURACY & REPEATABILITY ... + or - 2 sec.
MACHINE FLOOR SPACE ........................ 219" X 164" X 161h"
APPROXIMATE MACHINE WEIGHT .......... 43,650 LBS.

EQUIPPED WITH:
- FANUC 18i CNC CONTROL
- RIGID TAPPING
- FACTORY TECHNICIAN FOR INSTALLATION AND TRAINING
- LEVELING PADS AND FOUNDATION BOLTS

IN STOCK FOR IMMEDIATE DELIVERY

20" Width 40" Length Mark 2040 SURFACE GRINDER, MICROPROCESSOR AUTO IDF, 3X AUTO FEEDS,

20" x 40" MARK "HEAVY DUTY" COLUMN TYPE
(MADE BY PROTH) (ALSO SOLD BY SHARP)
  PRECISION SURFACE GRINDER

NEW, NEVER USED!

MODEL CD-26
PROGRAMMABLE MICROPROCESSOR
AUTO INCREMENTAL DOWNFEED CONTROL
w/CRT DISPLAY & PENDANT MDI
ADDED TO MACHINE IN 2007 BY FACTORY
TRAINED TECHNICIAN

MODEL : 2040    S/N: 0108J-01    NEW: 2001

  WIDTH & LENGTH GROUND ....................... 20" X 40"
CROSS TRAVEL .................................... 20.9"
LONGITUDINAL TABLE TRAVEL ....................... 47"
SPINDLE CENTER TO TABLE SURFACE ................. 27.6"
LONGITUDINAL HYDRAULIC TABLE FEED ..... 6.6' TO 82' FPM
INTERMITTENT CROSS FEED (IN. FEED) .. 0.004" - 0.6" IPM
CONTINUOUS CROSS FEED (BALLSCREW) ............. 39" IPM
NO. OF GRADUATIONS ON DIAL ........................ 200
FEED PER GRADUATION ........................... 0.0001"
FEED PER REVOLUTION ............................ 0.200"
VERTICAL TRAVEL
NO. OF GRADUATIONS ON DIAL ........................ 100
FEED PER GRADUATION ........................... 0.0001"
FEED PER REVOLUTION ............................ 0.010"
RAPID DOWNFEED (OPTIONAL) .................... 11.8 IPM
WHEEL SIZE (OD X WIDTH X ID) ............. 14" X 2" X 5"
SPINDLE MOTOR ................................... 10 HP
COOLANT SYSTEM MOTOR ........................... 1/8 HP

APPROXIMATE WEIGHT ......................... 16,000 LBS
APPROXIMATE DIMENSIONS (W X D X H) ..... 180"L-R x 90"D
                                               x 101"H

  EQUIPPED WITH:
"AMW" MICROPROCESSOR CONTROLLED (CRT DISPLAY) AUTO
  INCREMENTAL DOWNFEED CONTROL (PLUNGE & SURFACE GRIND
  MODES) ..... INSTALLED NEW IN 2007.
MANUAL "OVER-THE-WHEEL" DRESSER
HYDRAULIC POWER LONGITUDINAL TABLE FEED
POWER ELECTRIC CROSS FEED w/BALL SCREW
POWER RAPID WHEELHEAD POSITIONING
ANTI-FRICTION COATING ON WAYS
20" X 40" ELECTRO-MAGNETIC CHUCK W/NEUTROFIER CONTROL
COOLANT SYSTEM


** NEW!, NEVER USED! - WOW! **
  ** INSPECT IN OUR HARRISON, NJ FACILITY **

8" Swing 14" Centers Brown & Sharpe 814U OD GRINDER, SWING DOWN I.D., POWER TABLE, 5", 7" OR 10" WHEEL

8" x 14" BROWN & SHARPE "PRECISION" UNIVERSAL
         I.D./O.D. CYLINDRICAL GRINDER

** SWING DOWN I.D. GRINDING ATTACHMENT w/I.D. SPINDLE **

MODEL:  814U VALUEMASTER   S/N: 525-8144-2632    NEW: 1978

CAPACITY:
- GRINDS WORK UP TO ..................... 8" DIAMETER
- GRINDS LENGTH ................................. 14"
- DISTANCE BETWEEN CENTERS ...................... 24"

  WHEELHEAD:
- GRINDING WHEEL SIZE ........ 5", 7" OR 10" DIAMETER
- GRINDING WHEEL SPEEDS (3) ... 2730, 3600 & 5150 RPM
- WHEELHEAD TRAVEL ........................... 8-3/8"
- WHEELHEAD SWIVELS, LEFT & RIGHT ....... 110 DEGREES

  SWIVEL TABLE:
- ANGULAR SETTING TO LEFT & RIGHT ........ 90 DEGREES
- FINE SCREW ADJ. FOR SETTING TAPERS UP TO 3" PER FT.
- TABLE TRAVEL .................................. 22"
- TRAVEL PER REV. OF HANDWHEEL ............ 1/4" SLOW
                                            6-1/4" FAST

  HEADSTOCK:
- SWIVELS LEFT & RIGHT .................. 100 DEGREES
- SPINDLE SPEEDS (4) ................. 128 TO 540 RPM

  EQUIPPED WITH:
SWING DOWN I.D. ATTACHMENT w/I.D. SPINDLE
POWER TABLE TRAVERSE (OPTION)
DOUBLE ENDED WHEEL SPINDLE
CURRENTLY SET-UP WITH 5" GRINDING WHEEL .... MACHINE CAN
  ALSO BE USED WITH 7 & 10" DIAMETER GRINDING WHEELS
DUAL LIVE/DEAD HEADSTOCK SPINDLE
WHEEL DRESSER
WORKHEAD SET-UP WITH A CENTER
FINE CROSS FEED KNOB (.0001" ON WORK DIA.)
VERTICAL HANDWHEEL GRADUATED TO READ .0005"
ANTI-FRICTION BEARING WHEELHEAD SPINDLE
COOLANT PUMP & PIPING
1 H.P. 3/60/230-460 VOLT WHEELHEAD MOTOR
1/6 H.P. WORKHEAD MOTOR
MACHINE IS PRESENTLY WIRED FOR 460 VOLTS

  ** EXCELLENT CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **

16" Swing 60" Centers Birmingham DLC-1660 Special Deal ENGINE LATHE, 10 HP, 16 Speed, 4-1/8" Spindle Bore

Our Price: $12,950.00

New "Birmingham" Precision High Speed Engine Lathe
Model: DLC-1660   w/Removable Gap Block
Note: the photo shows this model
Special deal includes Free Delivery to all the lower 48
States and a Free Taper Attachment (installed)

10 HP motor delivers power thru all spindle speeds
Spindle gears, shafts and bearings are lubricated by pumped bath of oil
Induction hardened and ground bedways
D1-8 Camlock spindle with 4-1/8" spindle bore
16 Spindle speeds, 26 - 1,700 RPM
Rapid power traverse to carriage and cross slide
Multiple disc clutch for efficient spindle starting and reversing
Equipped with leadscrew cover

SPECIFICATIONS:
Swing over bed: 16"
Swing over cross slide: 9"
Swing over gap: 27-1/2"
Length of gap: 10"
Distance between centers: 60"
Spindle Bore: 4-1/8"
Spindle nose type (Camlock): D1-8
Spindle taper: MT-6
Spindle speeds: 16
Spindle speed range: 26 - 1,700 RPM
Spindle center to bedway: 8-5/8"
Threads per inch (No.) range (TPI): (42) 7/16 - 80
Metric threads (No.) range (mm): (37) 0.5 - 80
Module threads (No.) range (mm): (32) 0.25 - 40
Diametral threads (No.) range (DP): (42) 7/8 - 160
Long. feeds (No.) range (in/rev): (45) 0.0017 - 0.058
Cross feeds (No.) range (in/rev): (45) 0.0009 - 0.029
Leadscrew diameter (in): 1-9/16"
Leadscrew TPI: 2
Feed rod diamter: 1"
Tooling size: 1" x 1"
Compound slide travel: 5-7/8"
Cross slide travel: 13-3/4"
Tailstock taper: MT-5
Quill travel: 6"
Quill diameter: 3"
Main drive: 10 hp, 220/440V 3 ph
Maximum workpiece weight: 1,100 lbs.
Overall Dimensions:    122" L x 47" W x 54" H
New Weight Approx:   4730 Lbs.

Standard Equipment:
12" 3 Jaw Chuck with reversible jaws
16" 4-Jaw Chuck
15" Face plate
Steady rest capacity 1-1/8 - 6-1/4"
Follow rest capacity 3/4" - 3-1/8"
Dead centers, MT-4
Center sleeve, MT-6 to MT-4
Foot Brake
Threading Dial
Coolant System w/Full Length Splash Guard
Halogen work lamp
Leveling pads
Toolbox with tools

Optional Equipment (call for pricing):
Taper attachment
12" Cap. Larger steady rest with roller jaws
5C Hand lever type collet closer "JFK" USA
Quick Change tool post set
DRO - Newall or Acu-Rite

Mitsubishi DWC-90G WIRE-TYPE EDM

MITSUBISHI CNC WIRE EDM

MODEL: DWC-90G S/N: 5509H468
MISUBISHI WX CNC CONTROL
PENDANT
AUTOMATIC VERTICAL ALIGNMENT DEVICE
MELDAS WX CNC CONTROL WITH 14" COLOR CRT
350 mm x 400 mm x 160 mm MAX. WORKPIECE DIMENSION
150 kg MAX. WORKPIECE WEIGHT
420 mm X 490 mm TABLE DIMENSION
250 mm X-AXIS
300 mm Y-AXIS MACHINING STROKE

Located in Our Harrison, NJ Warehouse

20" Y Axis 40" X Axis Hansvedt SM-18 CINTROJET RAM-TYPE EDM, 150 AMP, DRO, BIG CAPACITY, 60" x 30" WORKTANK

HANSVEDT "VERY LARGE CAPACITY" RAM TYPE EDM

**** MADE IN USA ****

MODEL: CINTROJET 18E      S/N: J12101      NEW: 06/1992

WORK TABLE SIZE ...................... 41" x 25- 1/2"
LONGITUDINAL TABLE TRAVEL ............ 40"
CROSS TRAVEL ......................... 20"
WORTANK SIZE (INSIDE DIMS.) .......... 60" x 30" x 18"H

PLATEN SIZE .......................... 10" x 15- 3/8"
PLATEN TO TABLE ...................... 11" MAX., 23" MIN.
THROAT DISTANCE ...................... 22- 1/4"
RAM TRAVEL ........................... 12"
MAX. WEIGHT ON PLATEN ................ 1,650 LBS.
MAX. WORKPIECE WEIGHT ON TABLE ....... 4,000 LBS.

DIELECTRIC RESEVOIR (MACHINE BASE).... 210 GALS.
WORKTANK TANK CAPACITY ............... 140 GALS.
HYDRAULIC RESEVOIR ................... 20 GALS.

APPROX. WEIGHT ....................... 10,700 LBS.
APPROX. DIMS. ........................ 116" x 114" x 93"H

EQUIPPED WITH:

HANSVEDT "H-PULSE" MODEL #1506 150 AMP POWER SUPPLY
  (S/N: AR12706) (NEW 06/1992)
  -SIMPLE, UNDERSTANDABLE SPARK & SERVO CONTROLS
  -SERVO CONTROLS FEATURING DITHER, MANUAL, EDGE FINDER,
  AUTO RETRACT, AUTO LOCK, ORBIT STOP, ORBIT LOCK,
  SERVO SPEED & GAP ADJUST
  -LOW PEAK CURRENT, ARC DURATION (.5 TO 1843 MICROSECONDS)
  & % ON-TIME SELECTIONS FOR ULTRA-FINE FINISHING

"FUTABA" 3-AXIS DIGITAL READOUT DISPLY
RAM CYCLER OPTION
MICROMETER DOWN STOP

MACHINE IS WIRED FOR 3/60/440 VOLTS

PARTS & SERVICE AVAILABLE FROM THE "OEM":

www.hansvedtedm.com

** F.O.B. HARRISON, N.J. **
** EXCEPTIONAL CONDITION & APPEARANCE **

6" Y Axis 10" X Axis Charmilles D20 RAM-TYPE EDM, ISOCUT ORBITER, 23" x 16" x 11" WORKTANK

CHARMILLES RAM TYPE EDM MACHINE

MODEL: D20 S/N: 60554 NEW: 1975

SPECIFICATIONS:

WORK TANK
INSIDE DIMENSIONS ............ 22- 5/8" X 16- 5/16" X 11"H
RECOMMENDED DIELECTRIC RESERVOIR .................... R-80

TABLE
DIMENSIONS .......................... 17- 11/16" X 13- 3/8"
LONGITUDINAL & TRANSVERSAL TRAVELS ...... 9- 7/8" X 5- 7/8"
MAXIMUM TABLE LOAD ............................... 500 LBS.

WORKHEAD
BACKSLIDE TRAVEL .................................. 7- 7/8"
QUILL TRAVEL ...................................... 5- 7/8"
ANGULAR ADJ. OF RAM CHUCK ...................... +/- 3 DEG.
MAX. DISTANCE BETWEEN TABLE & ELECTR-HOLDER ...... 16- 1/8"

APPROX. MACHINE WEIGHT .......................... 2,650 LBS.

EQUIPPED WITH:
ISOPULSE POWER SUPPLY
ISOCUT ORBITOR OPTION
MICROFIN FINE FINISHING
BACKSLIDE & QUILL TRAVEL
SMALL FOOTPRINT w/DIELECTRIC TANK ATTACHED TO MACHINE

** ORIGINAL CONDITION & APPEARANCE **
** INNSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **

Machineryvalues.com

Search

Products

Service

Join our mailing list!