Reference Number: 122674

 "NEW" MR. DEBURR Vibratory Deburring & Finishing Machine
                      MODEL: 300DB

DESCRIPTION & SPECIFICATIONS:

CAPACITY:
3 cu. ft. tank.  Approximate working capacity 2.7 cu. ft.
maximum, part length 30".

MOTOR:
1 H.P., 3450 R.P.M., 115V, 15.0 F.L.A., 60 Hertz Single
Phase. (Also available in three phase and 50 hertz. Please 
call for prices).

LINING:
All cast polyurethane, 90 durometer 1/2" in thickness.

OVERALL DIMENSIONS:
Height 36"Max., Width 35 1/2" Max.,Depth 25".

INSIDE TANK DIMENSIONS:
Length 31", Depth 13 1/2" Width 13"

CONSTRUCTION:
Heavy gauge steel throughout, all welded construction.  All
welds performed by certified welders.

FINISH:
High quality, rust prohibiting alkyd enamel gloss gray in
color.

DISCHARGE DOOR: 
5" diameter opening. Door held in place with positive
locking device.

COVER:
Rubber sound reduction cover included.

DISCHARGE RAMP:
22" from floor

FLUID RECIRCULATING SYSTEM - INCLUDED:
7 gallon plastic container, submersible pump, pump bracket
and all necessary hook-up fittings.  Inlet valve to adjust
flow.  The fluid system is easily adaptable to a flow 
through system.

WEIGHT:
350 lbs. (empty)

Mr DeBurr replaces expensive hand deburring with
inexpensive automated finishing.  Mr. DeBurr can de-burr,
de-grease, clean and polish.  It can be used for aggressive
cutting or fine polishing.  With proper selection of
compound and media a limitless variety of finishes can be
produced. (Steel media not recommended).
Whether you are manufacturing parts from steel, alloys,
plastics, ceramic or wood, Mr DeBurr will save you valuable
man-hours.  Mr De Burr has been designed with the small 
shop in mind, allowing you to own professional finishing
equipment at an affordable price. At the same time, our
machine is suitable for large production shops.