Reference Number: 122829

SHARP PRECISION LATHES
                            MODEL 1340F      1440F/1440V 

CAPACITY     
Swing over bed................ 13"            14" 
Swing over cross slide........ 7 5/8"         8 5/8" 
Swing over gap................ 19"            20" 
Width of bed......................... 8 1/2"  
Distance between centers............. 40"  

HEADSTOCK     
Spindle nose type.................... D1-4 camlock  
Spindle bore......................... 1 1/2"  
Spindle speeds 1340F/ 1440F.......... 45 - 1,800 rpm [16]  
(1440V uses Electronic Variable Speed control) 30-2200 rpm  
Taper of spindle bore................ MT #5 

THREADS AND FEEDS     
longitudinal feeds - in / rev [40]... 0.0012 - 0.0294"  
Cross feed - in / [40]............... 0.0003 - 0.01" 
inch threads [40].................... 4 - 112 tpi 
Metric threads [22].................. 0.45 - 7.5mm 
leadscrew pitch, diameter............ 8 tpi, 3/4"  

CARRIAGE     
Saddle width......................... 14"  
Apron width.......................... 13 1/2"" 
Cross slide width.................... 13 1/2""  
Cross slide travel............ 6 1/2"          7" 
compound rest travel.......... 3 1/2"          4" 
compound width x length.............. 3 1/2 x 8 1/2" 

BED     
Bed length.................... 45"             55" 
Bed width............................ 8 1/2"  

TAILSTOCK     
Quill travel (graduated)............. 4 1/2"  
Quill diameter....................... 1 1/2"  
Quill taper.......................... MT #3  

GENERAL     
Spindle motor (220V or 440V, 60Hz, 3 phase 3 hp  
Net weight (approx.)......... 1,540 LBS        1,650 LBS

STANDARD EQUIPMENT:
Steady Rest, Coolant System, Splash Guard, 4-Way Tool Post,
 (Removable Gap) 2-Speed Motor Wired 220V
"F" Models all-geared headstockhoused inside a sturdy cast
 iron base
"V" Model features electronic variable speed control with 
 digital rpm readout, comes standard with a 220Vac Motor 
 with single phase or 3 phase operation.

MFG. SUGGESTED RETAIL:
MODEL: 1340F............ $7,450.00
MODEL: 1440F............ $7,890.00
MODEL: 1440V............ $8,900.00

SPECIAL PACKAGE PROMOTION

MODEL 1340F PACKAGE B-I
Standard Equipment: Coolant System, Splash Guard, 4-Way
Tool Post, 6" diameter Back Plate, Tool Kit, Threading 
Dial, Foot Brake, Dead Centers (Mt. #3), Center Sleeve 
(Mt.#5x3).
PLUS PACKAGE ACCESSORIES: 3-Jaw Chuck 8", 5C collet closer
Installed, Live Center, Work light, Micrometer Carriage 
Stop, Acu-Rite T-200 D.R.O. Installed....... $10,500

MODEL 1340F PACKAGE B-II
Standard Equipment: Same as above
PLUS PACKAGE ACCESSORIES: Same as above without 5C Collet 
Closer...................................... $ 9,890

MODEL 1440F PACKAGE C-I
STANDARD EQUIPMENT: Coolant system, Splash guard, 4-Way 
Tool Post, 6" Diameter Back Plate, Tool Kit, threading 
Dial, Foot Brake, Dead Centers (Mt. #3), Center Sleeve (Mt. 
#5x3)
PLUS PACKAGE ACCESSORIES: 3-Jaw chuck 8", 5C collet Closer 
Installed, Live Center, Work Light, Micrometer Carriage 
Stop, Acu-Rite T-200 D.R.O. Installed....... $10,940

MODEL 1440F PACKAGE C-II
STANDARD EQUIPMENT: Same as above
PLUS PACKAGE ACCESSORIES: Same as above without 5C Collet 
Closer...................................... $10,330

MODEL 1440V PACKAGE D-I Vari Drive Head w/ AC Inverter
STANDARD EQUIPMENT: Same as 1440F
PLUS PACKAGE ACCESSORIES: 3-Jaw chuck 8", 5C Collet Closer 
Installed, Live Center, Work Light, Micrometer Carriage 
Stop, Acu-Rite D.R.O. Installed............. $11,940

MODEL 1440
STANDARD EQUIPMENT: Same as above
PLUS PACKAGE ACCESSORIES: Same as above without 5C Collet 
Closer...................................... $11,330