|
Reference Number: 123208
Victor 2600 Digital Control Lathes (DCLs) Series
w/ FANUC 20-TA CNC Control
MACHINE SPECIFICATIONS
Multiple Function Lathe
1.
Manual Handwheel Operation
2.
Machine Guidance Operation
3.
Teach-in / Playback CNC Operation
4. Automatic CNC G-Code Operation
26" swing over bed
14.5" swing over cross-slide
Æ4.1" diameter hole through spindle
60"/ 80"/ 120" distance between centers
15.7" X-axis cross-slide travel
Main casting pieces are by massive Meehanite castings for superior dampening and rigidity
Headstock gears are made from chromium molybdenum steel (SCM21), hardened by carbonization, and precisely ground to provide smooth and quiet running
Forced lubrication of headstock gears
Spindle is supported by three precision bearings to insure accuracy and rigidity during heavy cutting (Suitable for large diameter work-pieces)
Ribbed bed constructed from an annealed processed casting insures no deformation occurs on the slideways
Hardened and ground bed ways
Saddle is coated with TURCITE-B to provide wear resistance
Rigid construction of the tailstock is able to withstand heavy drilling and cutting
Automatic force type lubrication system to all sliding surfaces & ballscrews
Hardware overtravel limit switch for all travel directions
Tailstock overtravel limit switch to avoid unexpected crashes
Complete FANUC System with Fanuc AC Brushless Servo Motors & Drives
Triple electronic handwheels for manual and automatic turning operations
Dual sliding doors to protect the operator from coolant and chips
Control panel conveniently mounted on apron for easy access with door closed
CRT Screen / CNC Keyboard mounted swivel arm for easy access and viewing
20 HP Spindle Motor
Vector control spindle drive - Excellent torque characteristic at all spindle speeds
Heavy duty, manual tailstock with Inch/Metric graduations
Tailstock taper: MT #5; Quill diameter: 4.1", Quill Travel : 6"
Feed rates: 0.01 ~ 200.0 in/min variable by program input
Rapid traverse: X-axis = 225 in/min, Z-axis = 300 in/min
Spindle speeds 0 ~ 1,200 RPM variable and programmable through 4 manual ranges
Spindle Nose: A-11
Automatic spindle jog during gear changes makes gear shifts easy
Aloris Super-Precision Quick Change Tool Post (DA Series)
Tool size 1.25" x 1.25" square shank
Chuck guard with safety interlock switch to prevent unexpected spindle movement
Fluorescent work light - Fully integrated to allow for CNC control of on/off function
Coolant System - Fully integrated to allow for CNC control of on/off function
Removable frontal chip pan under bed
Set of leveling pads, screws, and nuts
Set of wrenches for operating machine
Set of Operating and Machine Guidance manuals
Floor area: 2660DCL: 160" x 90" / 2680DCL: 180" x 90" / 26120DCL: 220" x 90"
Full one year parts on machine
One year warranty on Fanuc CNC system
CONTROL SPECIFICATIONS
Fanuc 20i-TB Industry Standard CNC
Color monitor & 44 key keypad
2-axis (X & Z) digital readout screen
Simultaneous 2-axis linear and circular interpolation
Manual operation via handwheels
Machine guidance operation via handwheels
Teach-in / Playback operation: manually run 1 st part, then Playback for automatic operation
Automatic Generation of G-code from Geometry data during teach in operation
Full CNC G-code, M-code, T-code, and S-code Functions
Simultaneous multiple M-code processing (Up to 3 M-codes)
Custom Macro B Programming Language for G-code programming (optional)
Background Editing of G-code programming during program execution (optional)
6 CNC Operation Modes: MEM, EDIT, MDI, Mchn Gdnce, Man/Hndwl, Ref Return
5 Auxiliary CNC Modes: Dry Run, Single Block, Optional Blk Skip, Manual Handwheel Interrupt, and Auxiliary Function lock
Manual Interrupt of automatic operations: Handwheel Interrupt and Spindle Interrupt
Constant Surface Speed (CSS) control for manual and automatic operations (Standard)
Conversational graphics programming
Diameter / Radius programming
Absolute and incremental programming
Inch / Metric input and display
On-line calculator function to aid in data input
On screen tool path graphics to verify part program
Taper, Chamfer, Radius, Roughing, Grooving, & Drilling in Manual and Automatic modes
Inch/Metric threading; Straight, Taper, and Multi-lead threading
X-Area Minus Area Cutting Function (Cutting from backside of part)
User programmable "Software Travel limits" to limit the travel for X & Z axes
Intelligent hardware travel limits - only stops movement in the over-travel direction
Inch / Metric feed rate input: inch/rev and inch/min or mm/rev and mm/min
Gear indicator lights on status panel
Auto spindle jog during gear changes
Spindle load meter: 0% - 180% of rated load
Lock switch for disabling parameter and program modification
Conveniently mounted machine controls on apron - E-Stop, Playback, Start, Stop
Aux. Controls on apron: work lamp, coolant, and CSS on/off
Spindle control on apron: forward, reverse, stop, and speed dial
Auto/Jog feedrate override: 0% to 200%
User selectable Jog / Feedrate override profiles: Linear or Exponential
Spindle override: 50% to 150%
Rapid Traverse override: 12.5%, 25%, 50%, & 100%
Incremental / continuous jog for X & Z axes
Intelligent Bi-directional home search for X & Z axes
Triple electronic handwheels for manual and automatic turning operations
Expert Handwheel configuration: all three handwheels active simultaneously
Multiplier switch for handwheel sensitivity: 0.0001", 0.001", & 0.01"
CNC "RUN VERIFY" by Joystick or handwheel for all automatic operations
Easy one touch X-Z Part Coordinate System setting
Full CNC control of coolant & work light on-off functions via M-codes
Three coordinate systems: Machine, Absolute, & Relative
Program storage 63 part program storage, 40 meters of paper tape (131 feet)
Backlash error compensation
Ballscrew pitch error compensation (from Laser Calibration Data)
Built-in RS-232 port for loading/unloading of part programs and other CNC data
16 Tool Geometry and 16 Tool Wear offsets with tool nose radius compensation
Self diagnostics with error messages on screen
Standard Accessories:
Rear enclosure with dual sliding doors
Built-in coolant system
Automatic lubrication system
High visibility fluorescent work lamp
Triple (3) Electronic Handwheels
Run-Time / Parts Counter
Ballscrew pitch error compensation
Tool nose radius compensation
Constant Surface Speed
Aloris DA Quick change tool post -1¼" Tool
Price: On Request
|
DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.
|
|
|
