Reference Number: 124684

"NEW" SHARP MODEL: 1118CNC Plus
 CNC TOOLROOM LATHE
 Specifications: 1118CNC Plus
 Chuck size 5C   
 Swing over bed 11" 
 Max. turning length 18"   
 Swing over cross slide 2.75" 
 Tooling Gang stlye   
 X travel 9" 
 Z travel 5"   
 Spindle bore 1.25" 
 Bar capacity 0.6875"   
 Spindle HP 5 
 Spindle nose 4 deg. Hardinge   
 Spindle RPM 0-4000 
 No. of speed ranges 1   
 Tool OD & ID size 1/2" 
 Type of ways Linear   
 Rapid traverse 394 ipm 
 CNC control Anilam 4200T   
 Tailstock quill dia. 1.36" 
 Tailstock quill travel 3.75"   
 Net weight 2,300 lbs 
 Accuracy +/- 0.000,080"   
 Repeatability 0.000,040" 
 Country of Origin Taiwan    
  
 Featuring: 
 Spindle runout - 0.000,050" TIR 
 Oversized cross slide 
 2 Front mounted MPGs 
 Ballscrews are supported on both ends by angular contact bearings 
 Full CNC or manual operation 
 
 Specifications: 
 X axis travel - 8.65" 
 Z axis travel - 11.2" 
 Spindle speed range - 0-4000 RPM 
 Tailstock quill taper - MT2 
 AC servo motors - Yaskawa, 1 HP each 
 Constant surface speed 
  Ballscrew dias. - 1"Z, 0.75"X 
 Spindle motor - 5 HP 
 Spindle nose - 5C Collet mount 
 Rapid traverse - 394 ipm 
 Max. feed rate - 200 ipm 
 Tooling - Gang Style (std.) or Quick change tool post (opt.) 
 
 Standard Anilam 4200T CNC control features: PC Based CNC control 
 12.1" TFT Color Active Matrix Screen 
 8 GB Hard drive 
 3.5" Floppy Disc 
 Manual, semi-auto, auto and single-step modes 
  Conversational programming 
 G code programming 
 Teach-in capability 
 Canned cycles 
 Shape editor 
  
 Standard machine items: 
 CNC threading with multiple lead capability 
 Tailstock with tang in quill 
 Full length rear splash guard 
 Pull down chip cover 
 Auto lube with low level indicator 
 Coolant system 
 Pneumatic Collet closer system with foot control 
 Halogen work light 
 Gang type tooling mounting plate, 6 x 12" 
 220 volts std. (440 v. opt.)