Reference Number: 124853

"NEW" JET XZ SERIES LARGE SPINDLE BORE LATHES
 
                         MODEL GH-1440ZX    MODEL GH-1460ZX
Stock Number:                   321910        321920 
SPECIFICATIONS:
Swing Over Bed (in)              14            14 
Swing Over Cross Slide (in):     7-5/8         7-5/8 
Swing Through Gap (in):          23-5/8        23-5/8  
Length of Gap (in):              12-1/4        12-1/4 
Distance Between Centers (in):   40            60 
Hole Through Spindle (in):       3-1/8         3-1/8  
Spindle Mount:                   D1-8          D1-8 
Spindle Taper (With sleeve):     MT-7 (MT-5)   MT-7 (MT-5) 
Number of Spindle Speeds:        12            12 
Range of Spindle Speeds (RPM):   42-1,800      42-1,800 
Number of Longitudinal & Cross 
     Feeds:                      122           122 
Range of Longitudinal Feeds 
     (in/rev):                 0.0015-0.0913  0.0015-0.0913 
Range of Cross Feeds (in/rev): 0.0006-0.0365  0.0006-0.0365 
Number of Inch Threads:          61            61 
Range of Inch Threads:           1-5/8 - 72    1-5/8-72 
Number of Metric Threads:        24            24 
Range of Metric Threads (mm):    0.05-20       0.05-20 
Max Tool Size (in):              1 x 1         1 x 1 
Max Compound Slide Travel (in):  5-1/8         5-1/8 
Max Cross Slide Travel (in):     9             9 
Max Carriage Travel (in):        35            55 
Tailstock Spindle Travel (in):   5             5 
Taper in Tailstock Spindle:      MT-4          MT-4 
Follow Rest Capacity (in):       1/2 - 3-1/2   1/2 - 3 1/2 
Steady Rest Capacity (in):       3/8 - 7       3/8 - 7 
Width of Bed (in):               13-3/8        13-3/8 
Overall Dimensions (LxWxH/in):   97-1/2 x 40 x 46-7/8  
  MODEL: GH-1460ZX.............  116-1/2 x 40 x 46-7/8 
Main Motor:           7-1/2 HP, 3 Ph 230/460V Prewired 230V 
Net Weight (lbs)                 5187          5380 

Features:
Uniquely designed exclusively by JET 
Tolerance test certificate included 
ISO 9001 certified manufacturer 
3-1/8" bore spindle is supported by two tapered and one ball bearing 
Chrome molybdenum headstock gears are hardened, ground, and shaved 
Universal gearbox allows inch, metric, diametral, and module pitch threads. No change gears required 
Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces 
T-slotted compound slide featuring a 4-way tool post 
One-piece cast iron base absorbs vibration allowing heavier cuts 
High quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground 
Removable gap allows up to 23-5/8" diameter work 
Five position automatic carriage stop increases productivity 
Attractive chrome control levers, dials, and knobs complete this impressive package 

Standard Equipment:
10" 3-jaw chuck with top reversing jaws 
12" 4-jaw chuck 
12" face plate 
4-way tool post 
Follow rest 
Large capacity steady rest 
Fully integrated coolant system 
Full length splash guard and coolant return 
Large easy to use foot brake 
Articulating halogen work lamp 
Centrally located controls with jog button 
Threading dial 
Mounting pads and levelers 
Spindle sleeve (MT-7 to MT-5) 
Dead center 
Live center 
Tool box and adjusting tools 

Optional Accessories:
5C lever-type collet closer (321282) 
16 pc. 5 C collet set (650014) 
Taper attachment kit (321281) (installation available) 
MT-4 live center (465304) 
MT-4 bull nose live center (465330 & 465332) 
Rotary phase convertor (577300K) 
Digital readouts installed 

NOTE: Rotary phase converter must be 10 HP or higher with high torque kit. Use of static phase converter will void warranty