Reference Number: 133554

USED TSUGAMI MODEL PANTHER SX-26 SWISS TYPE CNC LATHE, 
 TSUGAMI FANUC LA1 CNC CONTROL
  
 NEW IN 1997 
 GOOD CONDITION
 
 SPECIFICATIONS
 
 NUMBER OF TOOL STATIONS: 7 OD TOOLS
 4 ID TOOLS (2 LIVE, 2 FIXED)
 3 ID/OD BACKWORKING TOOLS
 3 CROSS DRIVEN TOOLS
 TOOLING SIZES
 TURNING: 5/8" SQUARE
 ID: 1" ROUND ESX-16
 BACKWORKING: 5/8" ROUND ESX-16
 DRIVEN TOOLS: 2 ESX-16 COLLET
 1 ESX-20 COLLET
 PROGRAMMABLE SERVO AXIS DESIGNATIONS 
 "Z2" I.D TOOL SLIDE IN AND OUT: 7.88"
 
 SUB-SPINDLE
 MAXIMUM DIAMETER: 1.02"
 MAXIMUM DRILL CAPACITY, MILD STEEL: 5/16"
 MAXIMUM TAP CAPACITY, MILD STEEL: 1/4"
 SPEED RANGE (SERIAL INTERFACE): 4,000 RPM
 POWER RATING: 1.5 HP AC
 SUB-SPINDLE INDEXING OPTION: 15 DEGREE INCREMENT
 PART EJECTION: FRONT OR REAR EJECTION BY ARRANGEMENT
 MAX BAR DIAMETER: 1.02" 
 Z1-AXIS TRAVEL: 8.21"
 SPEED RANGE OF MAIN SPINDLE: 200 TO 6300 RPM
 HORSEPOWER OF MAIN SPINDLE: 7.5 HP
 DRIVEN TOOL DRIVE MOTOR RATING: 5/8 HP
 MAXIMUM SPEED CROSS TOOL T10: 4,000 RPM (HIGH TORQUE)
 MAXIMUM SPEED CROSS TOOL T11: 2,400 RPM (HIGH TORQUE)
 MAXIMUM SPEED CROSS TOOL T12: 2,826 RPM (HIGH TORQUE)
 
 OFFSET FROM GUIDE BUSHING T10 & T11: 0.472" (.397 MAX SHANK)
 OFFSET FROM GUIDE BUSHING T12: 0.965" (.511 MAX SHANK)
 
 SPINDLE CENTER HEIGHT: 39.37"
 SPINDLE INDEX INCREMENT: 5 DEGREES
 
 DIMENSIONS (L X W X H): 72" X 46" X 67"
 WEIGHT: 5,100 LBS
 BAR FEED WEIGHT: 1,900 LBS
 BAR FEED (LENGTH) 175"
 
 ELECTRICS: 208 VOLTS, 3 PH, 60 CYC, 7.5 HP
 
 STANDARD EQUIPMENT
 
 SUB SPINDLE UNIT
 THREE POSITION BACKWORK STATION
 MAIN SPINDLE INDEX UNIT AND BRAKE
 DRIVEN STATIONS FOR (3) CROSS TOOLS
 DOOR INTERLOCKS
 ENCLOSURE FOR CONTROL SYSTEM
 PNEUMATIC SYSTEM FOR SPINDLE COLLET ACTUATION
 SIMPLE BAR FEED INTERFACE
 AUTOMATIC FLOOD COOLANT SYSTEM
 ALL MOTORS AND CONTROLS FOR 200 VOLTS
 WRENCHES AND INSPECTION SHEETS
 AUTOMATIC LUBRICATION SYSTEM
 TOTAL ENCLOSED WORK AREAS
 THREADING UNDER CNC
 SET OF STANDARD HAND TOOLS FOR MACHINE SETUP
 TOOL BOX
 
 
 EQUIPPED WITH
 
 IEMCA MINI BOSS 325 MAGAZINE BAR FEED 
 TSUGAMI FANUC LA1 CNC CONTROL
 LIVE TOOLING (3 CROSS, 2 END WORKING)
 MISC TOOL HOLDERS AND COLLETS
 PART CATCHER