Reference Number: 136594

DO 70/110-24M 
 STANDARD FEATURES 
 Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity 
 70 Ton Punch Station (1-1/8" in 3/4") 
 Keyed Punch Ram for Safety 
 9" Throat Depth 
 Punch Gauging Table with Fence and Scale 
 Die Holder Complete with 2" Die Insert 
 Punch Nut with Wrench 
 Adjustable Swing-Away Stripper 
 One Round Punch & Die: Max. Dia. 1-1/4" 
 Punch Jog Control 
 Two Adjustable Electric Stroke Controls with Scale 
 Two Electric Remote Foot Pedals 
 Two 2-Stage Hydraulic Pumps 
 Two Valves 
 Angle Shear Capacity 6" x 6" x 1/2" 
 Rectangle Notcher 3" x 5" x 3/8",
 3" x 4" x 1/2' 
 Notcher Table with Guides 
 110 Ton, 24" Bar Shear with 
 Sabre Blade (1" x 6", 3/8" x 24") 
 Shear Table with Miter Fence 
 Tool Table Work Area 
 Slug Receptacles 
 Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations 
 230/460 Volt/3 Phase Electrics (must specify voltage) 
 All Guards Necessary to Comply with
 ANSI B 11-5 Standards 
 Forklift Accommodations 
 One Year Warranty 
 Made in USA
 
 CAPACITIES & SPECIFICATIONS
 Rated On:  65,000 PSI Tensile - A 36 Mild Steel
 
 Punching Capacity: 70 Ton, 1-1/8" in 3/4"              
 Special Tooling: 4" Max. Dia.              
 Throat Depth: 9"                 
 Flat Bar Shear (Sabre Blade - Std): 110 Ton, 24" Length, 1" x 6", 3/4" x 10", 1/2" x 14", 3/8" x24" 
 Angle Shear 90 Degrees: 6" x 6" x 1/2"              
 Angle Shear 45 Degrees: 3" x 3" x 3/8"
 Angle Shear 45 Degrees (with Bar Shear): 4" x 4" x 1/2"          
 Brake 12": 65 Ton                 
 Brake 24": 45 Ton
 Open End Brake: Max 1/4" x 6" Flat or Angle Iron             
 Pipe Notcher Schedule 40 ID: ¾", 1", 1-1/4", 1-1/2", 2"           
 Rectangle Notcher: 2" x 2-1/2"" x 3/8"              
 90 Deg. V. Notcher: 6" x 6" x 5/16"    
 Notcher Rectangle: 3" x 5" x 3/8", 3" x 4" x 1/2"
 V. Notch: 3" x 3" x 3/8"
 Notching in Leg of Channel: 6" to 10"
 Channel Shear: 2" to 6" Adj.           
 ROD SHEAR               
 Round Rod: 1/4" TO 1-1/4", 9 Cav.                 
 Square Rod: 1/4" to 1", 1 Cav.              
 Square Tube Shear: ½" to 2", 14 ga.              
 Picket Tool: ½", ¾", 1"
 Offset Die Holder: Max. 40 Ton              
 SPM - Light Material: ¼" Stroke              
 SPM - Heavy Material: ¾" Stroke              
 Hydraulics: 2,500 PSI                 
 Motor Standard: 10 hp, 3 ph, 230/460/208/380/575           
 Dimensions: 30"W x 65"L x 72-1/8"H    
 Weight: 3,790 Lbs.