Reference Number: 136735

NEW SHARP PRECISION LATHE 
  MODEL: 1340VS w/Digital Variable Speed
 
 FEATURES
 - variable speed spindle drive with digital display
 - hi-low gear shift for spindle speed, range from 40 - 2,000 RPM
 - hardened & ground gears in headstock
 - directional control of carriage feed in front of apron for easy operation
 - jog button for easy engagement of gears
 - induction hardened & ground bedways for rigid structure
 - spindle supported by 2 high precision tapered roller bearings
 - carriage equipped with overload clutch to protect gears & screws
 - available for 3 phase or single phase electrics operation
 - electrically activated foot brake for quick stopping action
 - built-in cabinet for tools storage
 
 CAPACITY
 Swing over bed: 13"
 Swing over crosslide: 8-5/16"
 Swing over gap, width: 18-1/2"
 Width of bed: 7-1/2"
 Distance between centers: 40"
 
 HEADSTOCK
 Spindle nose type: D1-4 Camlock
 Spindle bore: 1-9/16"
 Spindle Speeds (Inf. Variable): 40 - 2,000 RPM
 Taper of spindle bore: MT #5
 
 THREADS & FEEDS
 Longitudinal feeds - inch per rev (40): 0.0016 - .0046
 Cross feeds - in per rev (40): 0.0005 - 0.015
 Inch threads (39): 2 - 56 TPI
 Metric threads (42): 0.5 - 12mm
 Leadscrew pitch, diameter: 8 TPI, 1"
 
 CARRIAGE
 Cross slide travel: 6-3/4"
 Compound travel: 3-1/2"
 Apron width: 11"
 Cross slide width: 4.5"
 
 BED
 Bed length: 64"
 Bed width: 7-1/2"
 
 TAILSTOCK
 Quill travel (graduated): 4"
 Quill diameter: 1-9/16"
 Quill taper: MT #3
 
 GENERAL
 Motor: 3 hp (220 Volts, Your Choice of Single Phase or 3 Phase)
 440 Volt Operation requires an optional transformer
 Net weight (approximately): 1,580 lbs
 
 STANDARD EQUIPMENT
 coolant system, 4-way toolpost, steady rest, thread dial, foot 
 brake, center sleeve (MT #5 x #3), dead centers (MT #3) tool kit, 
 removable gap block & splash guard.
 
 OPTIONAL EQUIPMENT (Call for prices)
 Follow rest, digital readout system, taper attachment, micrometer 
 carriage stop, 3-jaw scroll chuck (8"), 4-jaw chuck (8"), face plate 
 (12"), single toolpost, live center (MT #3), & drill chuck.