Reference Number: 136912

NEW SHARP UNIVERSAL CYLINDRICAL GRINDER
 w/Servo Driven Ballscrew, Touch Screen Control
 Automatic Wheelhead Infeed System
 MODEL: OD1030S
 
 
 SPECIFICATIONS
 
 CAPACITY
 Swing over table: 10.6"
 Distance between centers: 30"
 Maximum grinding diameter: 10"
 Maximum load between centers: 280 lbs.
 
 WHEELHEAD
 Infeed range: 10"
 Auto infeed range: 0.0001" - 0.04"
 Rapid forward and retract: 1.6"
 Auto feed rate: 0.04 - 2 IPM
 Manual feed, graduation (dia): 0.08"
 Manual feed, revolution (dia): 0.0002"
 Swivel angle: +/- 15 degree
 
 GRINDING WHEEL
 Diameter x width x bore: 16" x 1.5" x 5"
 Wheel speed: 1650 RPM
 
 WORKHEAD
 Spindle speed (infinitely variable): 50 - 350 RPM
 Swivel angle: +90 degrees
 Taper of center: MT#4
 
 TABLE
 Auto feed (variable speed): 2 - 160 IPM
 Manual feed: 0.5
 Swivel towards operator: 4 deg
 Swivel away operator: 9 deg
 
 TAILSTOCK
 Quill travel: 1"
 Taper of center: MT#4
 
 MOTORS
 Wheel drive: 5 hp
 Workhead drive: 0.5 hp
 Hydraulic pump drive: 1 hp
 Coolant pump: 0.25 hp
 
 GENERAL
 Height: 6.5'
 Weight (approximately): 5,200 lbs.
 
 * Other Models Available: 6, 8, 12, and 14" swing; 18-100" capacities 
 
 FEATURES & STANDARD EQUIPMENT 
 - Grinding wheel with flange 
 - Fixed and rotary type spindle on workhead 
 - Wheel extractor 
 - Dead center 
 - Balancing arbor 
 - Diamond dresser on workhead 
 - Work light 
 - Dial guard 
 - Front splash guard 
 - Tool kit 
 OPTIONAL ACCESSORIES (CALL FOR PRICING):
 - Internal grinding attachment 
 - 3 Jaw (6") jaw chuck with backplate 
 - Magnetic chuck (6") with backplate 
 - Balancing stand 
 - Fully-enclosed splash guard 
 - Automatic sizing attachment 
 - Touch probe* Angle truing attachment 
 - Automatic wheel balance 
 - Coolant system with magnetic separator 
 - Spare wheel flange