Reference Number: 137071

                                                          
  PARKER-MAJESTIC INTERNAL GRINDER  
 
  MODEL: A      S/N: 1387-53     NEW: 1953      
                                                          
 SPECIFICATIONS:                                           
 SWING OVER TABLE........................ 10"               
 TABLE TRAVEL (POWER FEED)............... 12"               
 POWER TABLE SPEEDS (4) .......... 12", 24", 36" OR 48" IPM      
 TABLE TRAVEL WITH RECIPROCATOR.......... 0 TO 3"           
 RECIPROCATOR SPEEDS TO TABLE                              
  (REVERSALS/MIN.)....................... 30, 50, 75 & 100   
 ANGLE SETTING OF TABLE (MAXIMUM)........ 5 DEGREES         
 TABLE WORKING SURFACE................... 5" X 33- 1/2"        
 SWIVEL OF WORK HEAD..................... 90 DEGREES        
 HOLE THROUGHT WORK HEAD SHAFT........... 13/16"             
 COLLET CAPACITY OF WORK HEAD............ 5/8" MAX.         
 WORKHEAD SPINDLE SPEEDS ................ 175, 325, & 425 RPM   
 TRAVEL OF CROSS SLIDE BY LEADSCREW ..... 2- 1/4" 
 FULL RANGE OF CROSS SLIDE IS ........... 7"          
 GRADUATIONS OF CROSS SLIDE HANDWHEEL ... 0.001"            
 GRAD. OF HANDWHEEL VERNIER DIAL ........ 0.0001"         
           
 FLOOR AREA............................. 32" X 62"       
 APPROX. MACHINE WEIGHT ................ 1,900 LBS.      
                                                        
 EQUIPPED WITH:                                          
 PARKER-MAJESTIC I.D. SPINDLE, MODEL 19-AL (S/N: 26690). 
  25,000 RPM ..... SPINDLE IS 11" LONG x 3" DIAMETER.
  ARBOR WITH SPINDLE IS 3/8" DIAMETER x 1- 3/4" LONG.
 POWER FEED - THIS FEED IS MOST USEFUL FOR TABLE STROKES
  OF LONGER THAN 3".
 RECIPROCATOR ACTUATED BY MEANS OF A LEVER.
  FOR STROKES 0 TO 3" AT 30, 50, 75 OR 100 PER MINUTE
 MICRO ADJUSTMENT OF CROSS FEED (.0001" GRAD.)
 "WESCOTT" 6" DIAMETER 4-JAW CHUCK  w/INDEPENDENTLY
  ADJUSTABLE JAWS                         
 SELF-CONTAINED COOLANT SYSTEM 
 COOLANT CAN BE FED THRU WORKHEAD SPINDLE OR OVER 
  I.D. SPINDLE
 WORK LIGHT
 ELECTRIC CABINET MOUNTED ON REAR OF MACHINE
 MACHINE IS PRESENTLY WIRED FOR 3/60/440 VOLTS                                        
                                                        
                             
 ** GOVERNMENT SURPLUS MACHINE - FROM STANDBY STORAGE **
 ** TRULY SUPERB CONDITION & APPEARANCE **
 ** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **