Reference Number: 137664

"NEW" SUPERTEC MODEL STP-1A618
 HIGH PRECISION 1 AXIS AUTOMATIC SURFACE GRINDER
 NOTE:  PHOTO IS OF THE STP-618CII MODEL
 
 FEATURES:
 - 3 HP V3 grade spindle motor for powerful output to achieve 
 precision work standards and better grinding capability.
 - Cartridge spindle w/4 preloaded class 7 (p4) bearings and 
 run-out of taper nose better than 0.000060" T.I.R. provides 
 quiet, vibration free operation for better workpiece accuracy.
 - Optional 0.000050" micro down feed and micro cross feed is 
 available (see below).
 - Vertical handwheel conveniently located at waist level. 
 - The table traverses on linear ball bearings with hardened 
 and ground guide ways to ensure smooth and easy movement of 
 the table.
 - Double V cross ways are hand scraped and Turcite coated for 
 greater flatness and high wear resistance.
 - All castings are tempered and stress relieved twice to assure 
 stability of the machine structure and resist deflection under load.
 - Hardened & ground column ways with cast spindle slide is 
 precision fitted for no "hang-up" gravity down-feed.
 - The Optional Mitsubishi PLC control uses a menu-driven LCD 
 touch screen is easy to learn and easy to set. Simply fill in the 
 blanks to set total grinding amount, rough increment, fine 
 increment, sparkout passes, feeding direction, parking position, 
 wheelhead retract distance, and press cycle start to complete 
 automatic grinding cycle. (on the CII model only)
 - Grinding cycles for CII model:  semi-automatic, surface, plunge, 
 & crisscross.      
 - Work table flatness shall be within 0.00012".
 - The automatic lubrication system continuously floods saddle & 
 column ways, bearings, and lead screws for better machine 
 performance and less maintenance. 
 
 Stringent quality control to Supertec specifications:
  - Work table flatness: 0.00012"
  - Parallelism of longitudinal movement: 0.0001"/18"
  - Parallelism of cross movement: 0.000080"/6"
  - Spindle parallel to work table: 0.0003"/12"
  - Run-out of wheel taper: 0.000060"
 
 SPECIFICATIONS:
 GENERAL CAPACITY
 Table size: .......................................................... 6" x 18" 
 Max. grinding length:............................................    19" 
 Max. grinding width:.............................................      6" 
 Distance from table surface to spindle center:...........    19" 
 Standard chuck size: ............................................. 6" x 18"  
 
 LONGITUDINAL MOVEMENT     
 Manual traverse: ...................................................    20" 
 Hydraulic traverse: ................................................    20"     
 Automatic travel: .................................................. 16-82 fpm
 
 CROSS MOVEMENT       
 Manual traverse: ....................................................     7"     
 Handwheel
  - Per revolution: ....................................................   0.2"    
  - Per graduation: ...................................................   0.001" 
 Max. length automatic feed ......................................   6.5" (2A 
 & CII only)
 
 VERTICAL DOWNFEED
 Rapid traverse: (CII) ...............................................   13 ipm
 Auto downfeed: (CII): .....................................  0.0001"-0.002"
 Handwheel:
  - Per revolution: .....................................................    0.05" 
  - Per graduation: ....................................................    0.0001" 
 
 MOTORS
 Spindle motor: ........................................................    3 HP 
 Hydraulic motor: .....................................................    1 HP
 Crossfeed motor: (except 618M, 1A618) ....................  1/2 HP
 
 GRINDING WHEEL
 Wheel size: ......................................................   8" x ½"x 1¼"
 Spindle speeds: .......................................................  3450 rpm
 
 STANDARD ACCESSORIES:
 -   Grinding wheel                  -   Dust guard 
 -   Wheel flange                          -   Diamond dresser
 -   Wheel extractor                 -   Balancing arbor
 -   Leveling bolts and pads              -   Touch-up paints
 -   Locating bolts                 -   Tool box with tools
 -   Splash guard                          -   Machine lamp
 
 SPECIAL OPTIONS AND ACCESSORIES (call for pricing):
 MAGNETIC CHUCKS AND CONTROLs
  - Electromagnetic chuck (6" x 18")    
  - Auto. Demagnetizer (must be ordered with above chuck)
  - Permanent magnetic chuck          
  - O.S. Walker LBP (fine pole, 6"x18")
  - O.S. Walker ceramax permanent chuck (fine pole, 6"x18")     
  - Automatic type control for O.S. Walker LBP chuck
        
 COOLANT SYSTEMS AND DUST COLLECTORS:   
  - Coolant system (40L)  
  - Coolant system w/paper filter (20L/min.) 
  - Coolant system w/mag. sep. & paper filter (20L/min, 80L)
  - Combination coolant & dust collector (50L)
  - Dust collector only    
  - Splash guards (must be ordered with any coolant system (618M only)
  - Universal wheel guard for side forming
 
 DRESSING ATTACHMENTS 
  - Manual parallel dressing attachment    
 
 SONY DIGITAL READOUT SYSTEMS
  - Two axis (Z & Y axis) digital readout 
  - One axis (Vertical Travel Only) digital readout
              
 OTHER OPTIONS AND ACCESSORIES:
  - Balancing stand    
  - Extra Grinding wheels    
  - Spare wheel flanges    
  - Micro down feed (0.000050")
  - Micro cross feed (0.000050")
  - Variable spindle speeds for wheelhead