Reference Number: 139056

New "Birmingham" Precision High Speed Engine Lathe
 Model: YCL-20120  with Removable Gap Bed
 
 FEATURES:
 10 HP MAIN MOTOR
 ONE PIECE CAST IRON BASE
 D1-8 SPINDLE WITH 3-1/8" SPINDLE BORE
 NO CHANGE GEARS REQUIRED
 12 SPEEDS FROM 45 - 1,600 RPM
 60 KINDS OF INCH THREADS FROM 112 - 2 TPI
 47 KINDS OF METRIC THREADS FROM 0.2 - 14MM
 MAIN SPINDLE HARDENED & PRECISION GROUND
 BED MADE OF FINE GRAIN HIGH TENSILE CAST IRON
 BEDWAYS INDUCTION HARDENED & PRECISION GROUND
 ALL GEARS & SHAFTS HARDENED & PRECISION GROUND
 MAIN SPINDLE SUPPORTED AT 3-POINT BY PRECISION BEARINGS
 
 SPECIFICATIONS:
 MAX. SWING OVER BED:   20"
 DISTANCE BETWEEN CENTERS:   120"
 MAX. EFFECTIVE CUTTING LENGTH:   116"
 MAX. SWING OVER CROSS SLIDE:   11-7/8"
 MAX. SWING IN GAP:   29"
 EFFECTIVE LENGTH IN GAP:   6"
 WIDTH OF BED:   13-3/4"
 SPINDLE NOSE:   D1-8
 DIAMETER OF SPINDLE THRU BORE:   3-1/8"
 TAPER OF SPINDLE CENTER:   MT#7 / MT#5
 SPINDLE SPEEDS, 12 STEPS: 25,35,55,80,120,170,235,350,525,700,1100,1600 RPM
 LONGITUDINAL FEEDS: 35 KINDS, 0.0022" - 0.0612" REV.
 CROSS FEEDS: 35 KINDS, 0.00048" - 0.01354" REV.
 METRIC THREADS: 47 KINDS, 0.2 - 14MM
 INCH THREADS: 60 KINDS, 112 - 2 TPI
 MODULE THREADS: 39 KINDS, 0.1 - 7MM
 DIAMETRAL PITCH THREADS: 50 KINDS, 4 - 112 DP
 MAX. TRAVEL OF CROSS SLIDE: 12-15/16"
 MAX. TRAVEL OF TOP SLIDE: 5-1/8"
 4-WAY TOOL POST SIZE: 1" X 1"
 LONGITUDINAL LEADSCREW DIA/PITCH: DIA. 1-5/8" / 4 TPI
 DIAMETER OF TAILSTOCK QUILL: 3"
 TAPER OF TAILSTOCK QUILL CENTER: MT#5
 MAX. TRAVEL OF TAILSTOCK QUILL: 7"
 POWER OF MAIN MOTOR: 10 HP, 230/460V/60HZ, 3 PHASE PREWIRED 230V
 POWER OF COOLANT PUMP: 1/8 HP, 230/460V/60HZ, 3 PHASE PREWIRED 230V
 
 Standard Equipment:
 - FOLLOW REST
 - 18" FACE PLATE
 - 6-1/2" STEADY REST W/ROLLERS
 - 12" 3-JAW CHUCK
 - 16" 4-JAW CHUCK
 - 10" DRIVE PLATE
 - OPERATION & PARTS MANUAL
 - COOLANT SYSTEM
 - HAOLGEN WORK LIGHT
 - REMOVABLE GAP
 - 4-WAY TOOL POST
 - THREAD CHASING DIAL
 - HAND OIL PUMP FOR WAYS
 - (2) DEAD CENTERS
 - REDUCING SLEEVE MT7/MT5
 - TOOL KIT WITH TOOLS
 - 4-POSITION AUTOMATIC KICK-OUT
 - LONGITUDINAL CARRIAGE STOP
 - FULL LENGTH FOOT BRAKE
 - FULL LENGTH SPLASH GUARD
 
 Optional Equipment (call for pricing):
 - TAPER ATTACHMENT
 - 12" STEADY REST WITH ROLLER JAWS
 - 5C HAND LEVER TYPE COLLET CLOSER
 - DIGITAL READOUT