CONTACT US
DIRECTIONS
Click Here For Preapproved Leasing
Check out our Auctions on
Check out our
Hydraulic Presses
Thousands of Used
Metalworking and Plastic Machines & New Machine Tools
Photos, Full Descriptions and Prices -
Fast & Easy
Reference Number: 139795
10" X 20" LANDIS HYDRAULIC UNIVERSAL CYLINDRICAL GRINDERPrice: On Request
MODEL: 1R S/N: 875-6 NEW: 1979
NOMINAL SWING OVER TABLE .......................... 10"
MAXIMUM SWING OVER TABLE ....................... 10-7/8"
NOMINAL DISTANCE BETWEEN CENTERS ................... 20"
HYDRAULIC TABLE TRAVERSE ................ 2" TO 240" IPM
TRAVERSE PER TURN OF HANDWHEEL .................. 0.200"
TRAVERSE HANDWHEEL GRADUATIONS .................. 0.001"
SWIVEL TABLE GRADUATED ......... 20 DEGREES, 4" PER FOOT
WHEELHEAD:
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ....... 90 DEG.
WHEEL SIZE ................................ 16" DIAMETER
MAXIMUM WIDTH, FULL WHEEL ........................... 3"
MAXIMUM HYDRAULIC INFEED - ON DIAMETER .......... 0.090"
RAPID INFEED STROKE ................................. 1"
MINIMUM FEED GRADUATIONS - ON DIAMETER ....... 0.000050"
WORK DIAMETER REDUCTION PER REVOLUTION OF
HANDWHEEL ....................................... 0.100"
WORK DIAMETER REDUCTION PER REVOLUTION OF
FINE FEED KNOB .................................. 0.001"
WHEELHEAD MOTOR ................................... 3 HP
WORKHEAD:
WORKHEAD SWIVELS TOWARD WHEELHEAD ........... 90 DEGREES
WORKHEAD SWIVELS AWAY FROM WHEELHEAD ........ 30 DEGREES
WORKHEAD SPINDLE SPEEDS (6) .............. 60 TO 600 RPM
WORKHEAD SPINDLE NOSE ............................ A2-5"
WORKHEAD MOTOR .................................. 1/4 HP
APPROXIMATE WEIGHT ........................... 4,150 LBS
APPROXIMATE DIMENSIONS .............. 8'L X 4'W X 6'6"HT
EQUIPPED WITH:
UNIVERSAL WHEELHEAD AND UNIVERSAL WORKHEAD
HYDRAULIC TABLE TRAVERSE
AUTO PLUNGE FEED
POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER
"DEAD" WORKHEAD SPINDLE
HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS
SELF-CONTAINED COOLANT SYSTEM
CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY LUBRICATED
16" GRINDING WHEEL
WHEELHEAD MOTOR IS 5 H.P./3/60/220-440 VOLTS
MACHINE IS PRESENTLY WIRED FOR 440 VOLTS
** ORIGINAL PAINT - EXCELLENT CONDITION & APPEARANCE * *
* INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE *
| DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation. |