Reference Number: 140029

                                                         
 10" X 20" BROWN & SHARPE "PRECISION"                 
 UNIVERSAL CYLINDRICAL GRINDER 
  
 MODEL:  #1      S/N:  521-1-465      NEW:  1961       
                                                         
 SWING OVER TABLE .................................. 10"  
 DISTANCE BETWEEN CENTERS, NOMINAL ................. 20"  
 DISTANCE BETWEEN CENTERS, MAXIMUM ............. 22-3/4" 
  
 GRINDING WHEEL SIZE ..................... 10" X 1" X 3"
 MINIMUM WHEEL WIDTH .............................. 3/8"
 WHEEL SPEEDS (3) ................ 2,500/3,000/3,600 RPM  
 SWIVEL AT THE WHEELSLIDE ........ 90 DEGREES EITHER WAY  
 WHEEL SPINDLE SWIVELS ........... 90 DEGREES EITHER WAY  
                                                         
 HEADSTOCK MOTOR ................................ 1/4 HP  
 INFINITELY VARIABLE SPINDLE SPEEDS ...... 60 TO 600 RPM  
 HEADSTOCK SPINDLE NOSE TAPER .................... A2-5"  
 HEADSTOCK SWIVELS EITHER SIDE OF ZERO ...... 90 DEGREES  
                                                         
 INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM  
 TABLE PER REV. OF HANDWHEEL:                             
  SLOW ........................................... 0.1"  
  FAST ........................................... 1.5"  
 DWELL AT EACH OR ALTERNATE TABLE REV. .. 0 - 2-1/2 SEC.  
 TABLE SWIVEL, SCALES FOR ANGULAR SETTING ... 8-1/4 DEG.  
 SCALES-TAPER PER FT. ..................... 3-1/2" (25%)  
 AUTOMATIC CROSS FEED, REDUCTION IN DIAMETER OR WORK      
  AT EACH OR ALTERNATE REVERSALS ...... 0.0001" - .003"  
 HAND FEED PER REV. OF HANDWHEEL:                         
  SLOW ........................................... 0.1"  
  FAST ........................................... 0.3"  
                                                         
 TAILSTOCK SPINDLE TAPER ...................... #7 JARNO  
 TAILSTOCK SPINDLE TRAVEL ......................... 5/8"  
 APPROXIMATE WEIGHT .......................... 5,100 LBS  
                                                         
 EQUIPPED WITH:
  HYDRAULIC TABLE TRAVERSE                                
  AUTO INFEED 
  ADJUSTABLE TABLE DWELL                                  
  RIGHT OR LEFT END WHEEL MOUNTING            
  SWIVELLING AT WHEEL SPINDLE HEAD OR AT THE WHEEL         
    SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN        
    COMBINATION STRAIGHT AND TAPER GRINDING,              
    EXTERNAL OR INTERNAL 
 FINE CROSSFEED, ADJUSTABLE TO .0001" WORK DIAMETERS                                 
 DUAL DEAD/LIVE HEADSTOCK SPINDLE
 COOLANT SYSTEM
 1- 1/2 H.P./3/60/220-440 VOLT WHEELHEAD MOTOR
 SELF-CONTAINED HYDRAULIC SYSTEM
 
 * EXCELLENT CONDITION & APPEARANCE **           
 ** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **