CONTACT US
DIRECTIONS
Click Here For Preapproved Leasing
Check out our Auctions on
Check out our
Hydraulic Presses
Thousands of Used
Metalworking and Plastic Machines & New Machine Tools
Photos, Full Descriptions and Prices -
Fast & Easy
Reference Number: 140613
15" x 50" CLAUSING-COLCHESTER ENGINE LATHE
MODEL: 8031, S/N: 6/00156/20823, NEW: 1975
SPECIFICATIONS:
SWING OVER BED ....................... 15-1/4"
SWING OVER CROSS SLIDE ............... 9-1/2"
DISTANCE BETWEEN CENTERS ............. 50"
BAR CAPACITY THROUGH SPINDLE ......... 2-1/8"
HOLE THRU SPINDLE .................... 2-3/16"
SPINDLE NOSE, CAMLOCK SIZE ........... D1-6"
SPINDLE SPEEDS (16) .................. 25 - 2000 RPM
HEADSTOCK & TAILSTOCK SPINDLE TAPER .. #4 MORSE
TAILSTOCK SPINDLE TRAVEL ............. 6-1/8"
TAILSTOCK SPINDLE DIAMETER ........... 2-5/16"
WIDTH OF BED ......................... 11"
FEEDS:
LONGITUDINAL (45) .............. .0015 - .040 IPR
CROSS (45) ..................... .00075 - .020 IPR
THREADS:
INCH (45) ...................... 2 - 72 TPI
METRIC (39) .................... .2 - 14 mm
DIMENSIONS ........................... 96" x 38" x 52"
APPROX WEIGHT ........................ 3,500 LBS
EQUIPPED WITH:
- 10" 3-JAW CHUCK
- 10" 4-JAW CHUCK
- STEADY REST WITH BOTH ROLLER & BONZE TIPS
- FOLLOW REST
- FACEPLATE
- TRAV-A-DIAL FOR LONGITUDINAL CARRIAGE TRAVEL
- INDUCTION HARDENED BEDWAYS
- QUICK CHANGE UNIV GEARBOX PROVIDES WIDE RANGE OF INCH/METRIC FEEDS & THREADS
- THREADING DIAL
- MICROMETER CARRIAGE STOP
- DRILL CHUCK FOR TAILSTOCK
- FOOT BRAKE
- SELF CONTAINED COOLANT SYSTEM w. FULL LENGTH REAR SPLASH GUARD
- 7.5 HORSE POWER SPINDLE DRIVE MOTOR
PRESENTLY WIRED FOR 230 VOLT OPERATION
CONDITION: **** EXCELLENT ****
| DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation. |