CONTACT US
DIRECTIONS
Click Here For Preapproved Leasing
Check out our Auctions on
Check out our
Hydraulic Presses
Thousands of Used
Metalworking and Plastic Machines & New Machine Tools
Photos, Full Descriptions and Prices -
Fast & Easy
Reference Number: 140813
Price: On Request
5" X 12" MYFORD "PRECISION"
HYDRAULIC PLAIN CYLINDRICAL GRINDER
MODEL: MG12-HP S/N: HP-62405 NEW: 1964
MAXIMUM GRINDING DIAMETER .......................... 3"
SWING OVER TABLE ................................... 5"
MAXIMUM TABLE TRAVEL .......................... 13-3/4"
DISTANCE BETWEEN CENTERS .......................... 12"
TABLE SWIVELS EITHER WAY ...................... 10 DEG.
TABLE TRAVEL PER REV. OF HANDWHEEL .............. 0.44"
HYD. TABLE TRAVERSE ..................... 0 TO 120" IPM
DWELL (CARRIAGE) ......................... 0 TO 8 SECS.
WHEELHEAD:
TOTAL TRAVEL BY FEEDSCREW .................... 3-7/8"
HYD. RAPID RETRACTION ........................ 1-1/8"
INFEED PER REV. OF HANDWHEEL ................. 0.025"
WHEELHEAD GRAD. (INFEED) .................... 0.0001"
FINE FEED TO DEAD STOP .................... 0.000025"
PLUNGE INFEED RATE PER MINUTE ...... 0.0025" TO .125"
AUTOMATIC INFEED RATE .............. 0.0001" TO .001"
GRINDING WHEEL (RECESSED) ............. 10" X 1" X 3"
WHEEL SPINDLE SPPEDS (2) ...........2,200 & 2,500 RPM
WHEELHEAD MOTOR ................................ 2 HP
WORKHEAD:
WORKSPEEDS, INFINITELY VARIABLE ...... 100 TO 900 RPM
CAPACITY THRU STD. DRAW TUBE ................... 3/4"
MAXIMUM COLLET CAPACITY ........................ 3/4"
WORKHEAD MOTOR ............................... 1/4 HP
APPROXIMATE MACHINE WEIGHT ................. 2,000 LBS.
EQUIPPED WITH:
HYDRAULIC TABLE TRAVERSE
AUTOMATIC INFEED
AUTOMATIC PLUNGE INFEED
VARIABLE DWELL @ EACH TABLE MOVEMENT
RAPID WHEELHEAD ADVANCED/RETRACTION
SPARKOUT TIMER
DUAL LIVE/DEAD WORKHEAD
COOLANT SYSTEM
EXTERNAL HYDRAULIC PUMP & TANK
(1) WHEEL FLANGE
3/60/220-440 VOLT ELECTRICS
** EXCELLENT CONDITION * *
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
| DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation. |