CONTACT US
DIRECTIONS
Click Here For Preapproved Leasing
Check out our Auctions on
Check out our
Hydraulic Presses
Thousands of Used
Metalworking and Plastic Machines & New Machine Tools
Photos, Full Descriptions and Prices -
Fast & Easy
Reference Number: 141754
Price: $44,500Linde (L-Tech) CM350
13' X 24' CNC Plasma/5 Torch Oxy Fuel Cutting System
New 1990
Specifications:
Cutting Width:159"
Cutting Table Height: 28"
Speed Range Gas 0 - 50 IPM
Speed Range Plasma 0 - 300 IPM
# Of Oxy Torches: 4
# Of Plasma Torches: 1
Beam Length: 16'5"
Rail To Rail: 15'4"
Length Of Track: 24'
Equipped With:
4 Oxy Torches
1 Plasma Torch
200 Amp Plasma Power Supply
L-Tech Ucnc 8 Control
12' X 12' Water Table
Automatic Height Control
Crt Display
Tape Reader
Joystick
Preheat Timer Stop
Rugged Dual Rack & Pinion Drive
Heavy-Duty Positive Rack And Pinion Drives
High Speed Contouring With Auto Plasma Cornering Comp.
| DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation. |
Reference Number: 141754
Price: $44,5005" LUCAS CNC TABLE TYPE HORIZONTAL BORING MILL
MODEL: 542B84,
REMANUFACTURED BY PHOENIX & SPINDLE REBUILT BY LUCAS
SPECIFICATIONS:
SPINDLE DIAMETER....................... 5"
SPINDLE TAPER.......................... 50 TAPER
SPINDLE TRAVEL (Z-AXIS)................ 36"
TABLE SIZE............................. 48" X 86"
TABLE CROSS TRAVEL (X-AXIS)............ 72"
VERTICAL TRAVEL OF SPINDLE (Y-AXIS).... 72"
SADDLE TRAVEL (W-AXIS)................. 77"
SPINDLE SPEEDS (VARIABLE IN 3 RANGES).. 10 TO 1,110 RPM
EQUIPPED WITH:
* FANUC 15-M CNC CONTROL
* FANUC RED CAP AC SERVO MOTORS
* POWER DRAW BAR
* BALL SCREWS ALL AROUND
* SET UP FOR RENISHAW PROBE
* FOUR WAY BED DESIGN
* HARD WAYS BED & SADDLE
* 30 HORSE POWER SPINDLE MOTOR
THIS MACHINE WAS REBUILT & RETOFITTED BY PHOENIX AND CNC ENGINEERING FOR PRATT & WHITNEY.
LUCAS DID THE REBUILD OF THE SPINDLE IN 1995
INSPECT IN OUR NEW JERSEY WAREHOUSE
| DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation. |