HOME

CONTACT US

DIRECTIONS

Know the
reference number?

enter it here

Click Here For Preapproved Leasing


Check out our Auctions on


Our YouTube Channel

Our Facebook Page

Our Twitter Page

Check out our

Hydraulic Presses


Join Our Email List
Email:  

Used Machinery and Machine Tools Used Machinery Used Machine Tools

 

Thousands of Used Metalworking and Plastic Machines & New Machine Tools
Photos, Full Descriptions and Prices - Fast & Easy

10'' Swing 24'' Centers Brown & Sharpe 1024U OD GRINDER, HYD. TABLE, PICK & PLUNGE, RAPID,

 

















































Reference Number: 149158

10" X 24" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER
 
  MODEL: 1024U  S/N: 521-1024-281    NEW: 1980
 
** FULL AUTO CYCLE (PICK, PLUNGE, RAPID, SPARKOUT TIMER)**
 
  SWING OVER TABLE .................................... 10"
DISTANCE BETWEEN CENTERS, NOMINAL .................... 24"
DISTANCE BETWEEN CENTERS, MAXIMUM ................ 26-3/4"
 
  WHEELHEAD SPINDLE SPEEDS (3) ...... 2100, 2400& 2800 RPM
GRINDING WHEEL SIZE ........................ 12" X 1" X 5"
MINIMUM GRINDING WHEEL WIDTH ........................ 3/8"
SWIVEL AT THE WHEELSLIDE ........... 90 DEGREES EITHER WAY
WHEEL SPINDLE SWIVELS .............. 90 DEGREES EITHER WAY
 
  INFINITELY VARIABLE SPINDLE SPEEDS ........ 60 TO 600 RPM
HEADSTOCK SPINDLE NOSE TAPER ....................... A2-5"
HEADSTOCK SWIVELS EITHER SIDE OF ZERO ......... 90 DEGREES
 
  INFINITELY VARIABLE TABLE SPEED .......... 3" TO 150" IPM
TABLE PER REV. OF HANDWHEEL:
SLOW ................................................ 0.1"
FAST ................................................ 1.5"
DWELL AT EACH OR ALTERNATE TABLE REV. ..... 0 - 2-1/2 SEC.
TABLE SWIVEL, SCALES FOR ANGULAR SETTING ...... 8-1/4 DEG.
SCALES-TAPER PER FT. .............................. 3-1/2"
 
  MAX. TRAVEL OF WHEELSLIDE ............................ 5"
CROSSFEED HANDWHEEL GRAD. ....................... 0.00002"
AUTOMATIC CROSS FEED, REDUCTION IN DIAMETER
  OR WORK AT EACH OR ALTERNATE REVERSALS .. 0.0001" - .003"
HAND FEED PER REV. OF HANDWHEEL:
SLOW ................................................ 0.1"
FAST ................................................ 0.3"
 
  TAILSTOCK SPINDLE TAPER .........................#7 JARNO
TAILSTOCK SPINDLE TRAVEL ............................ 5/8"
 
  APPROXIMATE WEIGHT ............................ 5,100 LBS
 
MACHINE FEATURES:
DUAL RIGHT OR LEFT END WHEEL MOUNTING
SWIVELLING AT WHEEL SPINDLE HEAD OR AT THE WHEEL
  SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN
  COMBINATION STRAIGHT AND TAPER GRINDING,
  EXTERNAL OR INTERNAL.
 
INFEED HANDWHEEL GRADUATED TO READ TO 0.000020"
HYDRAULIC TABLE TRAVERSE
AUTO INFEED OF WHEELHEAD @ TABLE REVERSALS
AUTO PLUNGE INFEED
POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER
ADJUSTABLE TABLE DWELL
SELF-CONTAINED HYDRAULIC SYSTEM
OIL CHILLER UNIT (FAN COOLED)
  
  
EQUIPPED WITH:
B & S "HYDROSTATIC" WORKHEAD w/DUAL DEAD/LIVE
  HEADSTOCK SPINDLE
COLLET CHUCK
3-POINT STEADY REST
2-POINT STEADY REST
"TRABON" AUTOMATIC LUBRICATION SYSTEM
COOLANT SYSTEM
MOTORS ARE 3/60/230-460 VOLTS
MACHINE IS PRESENTLY WIRED FOR 460 VOLTS
 
** SUPERIOR CONDITION FROM A DEFENSE CONTRACTOR  **
 
  ** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
 
 

Price: On Request

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.


If you would like our salesperson to contact you regarding this machine,
please fill out the form below.

To have this form automatically fill in for you, quickly register by clicking here.

First Name
Last Name
Company Name
Address1
Address2
City
State
Zip Code
Country
Phone Number
Fax Number
E-Mail Address
Please specify additional information needed
Contact Phone
Fax
E-Mail
Mail

 

Machinery Values Inc.
401 Supor Blvd.
Harrison, NJ 07029
Voice: (973) 497-7500
Fax: (973) 497-7501
e-mail:
sales@machineryvalues.com

If you have any problems accessing this site please e-mail:
webmaster@machineryvalues.com

© 2000 Machinery Values Inc. All rights reserved.