HOME

CONTACT US

DIRECTIONS

Know the
reference number?

enter it here

Click Here For Preapproved Leasing


Check out our Auctions on


Our YouTube Channel

Our Facebook Page

Our Twitter Page

Check out our

Hydraulic Presses


Join Our Email List
Email:  

Used Machinery and Machine Tools Used Machinery Used Machine Tools

 

Thousands of Used Metalworking and Plastic Machines & New Machine Tools
Photos, Full Descriptions and Prices - Fast & Easy

10 KVA Electro Arc HK6QT LARGE TABLE/CAPACITY MODEL, NEW 1995, TAP DISINTEGRATER, AUTO DOWNFEED, 59'' x 39.5'' WORKTABLE, ''Q'' HEAD

 













Reference Number: 152833

  ELECTRO-ARC “EXTRA LARGE WORK SURFACE CAPACITY” TAP DISINTEGRATOR
 
MODEL: HK6QT     S/N: 13332     NEW: 1995
 
HK SERIES:
HEAVY DUTY PERFORMANCE
PRECISION GROUND & CHROMED QUILL ASSEMBLIES
RACK & PINION MOVEMENT
AUTO DEPTH STOP
POWER LOAD METER TO MONITOR FEED CONTROL
TWO SPEED VARIABLE FEED MOTOR
FINE SENSITIVE ADJUSTMENTS
RETRACTING HEAD WITH AUTOMATIC OFF
RIGID DOUBLE BARRELED CROSSARMS WITH PRECISION BALL BEARING SLIDES
TWO HARDENEND, 1- 1/2" DIAMETER AND 36" LONG GROUND ARMS WITH (4) LINEAR BALL
 FOR RAPID SET UP.
FULL 360 DEGREES ROTATION AROUND THE COLUMN.  MANUAL HAND LOCKS TO SECURE POSITION.
ADJUSTABLE 12" LIFT RACK
HEAVY-DUTY 2- 3/4" DIAMETER CHROMED COLUMN x 50" HIGH
COLUMN BASE CASTING CAN BE PLACED ANYWHERE ON THE TABLE OR ALTERNATE WORK SURFACES
THE ADJUSTABLE WORK HEIGHT FROM THE DISINTEGRATOR HEAD TO THE TABLE IS 36" AND 72"
 TO THE FLOOR.
JIC LIGHTED PUSH BUTTONS WITH EMERGENCY STOP PUSH BUTTON
SLIDE-IN POWER CHASSIS
EXTERNAL FUSES
HEAVY REINFORCED FRAME CONSTRUCTION.  GROUND, CAST IRON WORK TABLE, 51"W x 39- 1/2" DEEP
 WORKING TABLE SURFACE.  OVERALL TABLE WIDTH IS 59", WITH THE COOLANT TROUGH.
GROUND WORK TABLE WITH 8 "T" SLOTS
HEAVY DUTY WHEELS AND LEVELERS
LARGE CAPACITY PULL-OUT COOLANT SYSTEM
MACHINE SUPPORTS 8,000 LBS.
 
"IN THE QUILL" "Q" HEAD - PROVIDES CONTINOUS, RELIABLE, HEAVY-DUTY SERVICE FOR THE MOST
 DEMANDING APPLICATIONS.  THE CONSTRUCTION & DESIGN MINIMIZES MAINTENANCE.  
 THE HEAD IS 3- 1/4" DIAMETER, HARD CHROMED & PRECISION GROUND.  
 9" OF VERTICAL RACK & PINION TRAVEL.
 
"AUTOMATIC FEED" - AUTOMATIC TRANSISTORIZED POWER FEED PROVIDES UNINTERRUPTED
 FEED WITH UNATTENDED OPERATION.  FEATURES 9" OF MOTOR FEED, ADJUSTABLE AUTOMATIC
 SHUT OFF SWITCH, AUTO STOP, VARIABLE TWO-SPEED, FEED RATE SELECTOR AND PLUG-IN
 INTEGRATED CIRCUIT BOARD.
 
APPROX. MACHINE WEIGHT................. 1,550 LBS.
 
  CUTTING SPEEDS:
1/4"............. 1 MIN.
5/16"............ 1-1/2 MIN.
3/8"............. 1-3/4 MIN.
1/2"............. 2 MIN.
5/8"............. 3-1/2 MIN.
3/4"............. 4 MIN.
 
 
ELECTRICS:
(8) CUTTING HEAT SETTINGS
10 KVA RATING
CIRCUIT BREAKER PROTECTION; D.C. CURRENT, LOW VOLTAGE
1 PH/60/480 VOLTS, 13 AMPS
 
** INSPECT IN OUR HARRISON, N.J. WAREHOUSE **
****** EXCELLENT CONDITION & APPEARANCE ******
 
 

Price: On Request

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.


If you would like our salesperson to contact you regarding this machine,
please fill out the form below.

To have this form automatically fill in for you, quickly register by clicking here.

First Name
Last Name
Company Name
Address1
Address2
City
State
Zip Code
Country
Phone Number
Fax Number
E-Mail Address
Please specify additional information needed
Contact Phone
Fax
E-Mail
Mail

 

Machinery Values Inc.
401 Supor Blvd.
Harrison, NJ 07029
Voice: (973) 497-7500
Fax: (973) 497-7501
e-mail:
sales@machineryvalues.com

If you have any problems accessing this site please e-mail:
webmaster@machineryvalues.com

© 2000 Machinery Values Inc. All rights reserved.