Click Here For Preapproved Leasing
Check out our Auctions on
Check out our
Thousands of Used
Metalworking and Plastic Machines & New Machine Tools
Reference Number: 158393
K.O. Lee Radial grinding fixture Model BA986
"These are precision instruments for generating convex and concave radii on cutting tools.
They can sharpen existing radii on end mills, ball end mills (1/2" or larger), various
milling cutters with or without mounting arbors, and other smaller single point tools,
router bits, and similar cutters.
The basic fixture is also used to generate a radius on shank mounted balls, burr blanks,
ball end mills, and other such semi-ball forms. It can generate a convex or concave
radius on the grinding wheel when form grinding.
Roller bearings are employed between the fixture base and its pivoting worktable which
swings 360 degrees. Cneter gauge(s) provide a simplified method of centering any
tool by locating the tool against the gauge. Crossfeed & longitudinal feed screws
of the lower and upper slide sections are calibrated in .001" (.050"/revolution)
and controlled by large handwheels for easy set-up or adjustment during grinding.
Dials can be re-set to zero without moving the slides. Adjustable dovetail ways
can be locked.
The lever arm allows the fixture to be tilted away from the grinding wheel for quick
checking of work. The entire pivoting sadlle and turntable may be fixed at a tilt up
to 15 degrees from the horizontal.
Cutter surfaces which are tangent to radii ground may b e ground in sequence using
machine longitudinal table feed."
BA939 Center Gauge
BA940 Tooth Rest
** Original Paint - Superior Condition & Appearance **
** Inspect in our Harrison, NJ Warehouse **
Price: On Request
401 Supor Blvd.
Harrison, NJ 07029
Voice: (973) 497-7500
Fax: (973) 497-7501
If you have any problems accessing this site please e-mail:
© 2000 Machinery Values Inc. All rights reserved.