HOME

CONTACT US

DIRECTIONS

Know the
reference number?

enter it here

Click Here For Preapproved Leasing


Check out our Auctions on


Our YouTube Channel

Our Facebook Page

Our Twitter Page

Check out our

Hydraulic Presses


Join Our Email List
Email:  

Used Machinery and Machine Tools Used Machinery Used Machine Tools

 

Thousands of Used Metalworking and Plastic Machines & New Machine Tools
Photos, Full Descriptions and Prices - Fast & Easy

5'' Swing 12'' Centers Myford MG12-HPT, NEW 1979 OD GRINDER, HYD. TABLE, AUTO INFEED, PLUNGE, RAPID, SPKT TIMER

 



Reference Number: 158550

                                                     
5" X 12" MYFORD HIGH-PRECISION PLAIN CYLINDRICAL GRINDER  
 
** I.D. ATTACHMENT AVAILABLE **                
                                                        
   MODEL: MG12-HPT    S/N: HPT-134265     NEW: 1979     
                                                        
MAXIMUM GRINDING DIAMETER .......................... 3"
SWING OVER TABLE ................................... 5"
CAPACITY BETWEEN CENTERS .......................... 12"
MAXIMUM TABLE TRAVEL .......................... 13-3/4"
TABLE SWIVELS EITHER WAY ................... 10 DEGREES
TABLE TRAVEL PER REV. OF HANDWHEEL .............. 0.44"
HYDRAULIC TABLE TRAVERSE ................ 0 TO 120" IPM
DWELL (CARRIAGE) ....................... 0 TO 8 SECONDS
                                                        
WHEELHEAD (ALL GRADUATIONS, ON WORK DIAMETER):          
 TOTAL TRAVEL BY FEED SCREW ................... 3-7/8"  
 HYDRAULIC RAPID RETRACTION ................... 1-1/8"  
 INFEED PER REV. OF HANDWHEEL .................. 0.04"  
 WHEEL FEED GRADUATION ....................... 0.0002"  
 FINE FEED TO DEAD STOP ..................... 0.00005"  
 TOTAL PLUNGE INFEED .......................... 0.025"   
 PLUNGE FEED RATE, MAXIMUM ................ 0.125" IPM   
 PLUNGE FEED RATE, MINIMUM ............... 0.0025" IPM   
 INTERMITTENT INFEED, COARSE, MAXIMUM ......... 0.002"   
 INTERMITTENT INFEED, FINE, MINIMUM ......... 0.00005"   
 SPARKOUT ............................ 0 TO 50 SECONDS   
 WHEEL SPEEDS (2) .................... 1830 & 1988 RPM   
 GRINDING WHEEL .................... 12" X 1-1/2" X 5"   
 MINIMUM WHEEL DIAMETER FOR ZERO WORK DIAMETER ... 10"   
                                                         
WORKHEAD:                                                
 SPINDLE SPEEDS, INFINITELY VARIABLE ... 50 TO 900 RPM   
 CAPACITY THRU STANDARD DRAW TUBE ............... 3/4"   
 MAXIMUM COLLET CAPACITY ........................ 3/4"   
APPROXIMATE WEIGHT .......................... 2,226 LBS  
                                                         
EQUIPPED WITH:                                           
 HYDRAULIC TABLE TRAVERSE                                
 AUTOMATIC INFEED                                        
 PLUNGE INFEED                                           
 VARIABLE DWELL @ EACH END OF TABLE MOVEMENT             
 AUTOMATIC HYDRAULIC RAPID ADVANCE AND RETRACTION       
   OF GRINDING WHEELHEAD                                
 SPARKOUT TIMER (1 TO 50 SECONDS)                       
 VISUAL INDICATION OF FEED - A LARGE SCALE MOUNTED ON   
   THE TOP OF THE FRONT CONTROL CONSOLE PERMITS         
   MONITORING OF THE FEED CYCLE.                        
 DEPTH OF FEED ADJUSTMENT CONTROL (GRADUATED .0001")    
 AUTOMATIC CYCLE/MANUAL OPERATION SELECTOR              
 COARSE/FINE FEED CHANGEOVER                            
 INFINITELY VARIABLE WORKHEAD SPINDLE SPEEDS            
 AUTOMATIC LUBRICATION FOR WHEELHEAD AND CARRIAGE WAYS  
 SEPERATE ELECTRICAL CONSOLE CONTROL                    
 4 C COLLET SYSTEM AND DRAW BAR                         
 STANDARD TABLE MOUNTED DRESSER                         
                                                        
** MYFORD SWING DOWN I.D. ATTACHMENT W/SPINDLE IS       
  AVAILABLE FOR AN ADDITIONAL $2,950 **                 
                                                        
* * EXCELLENT CONDITION & APPEARANCE **                 
 **INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE**

Price: On Request

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.


If you would like our salesperson to contact you regarding this machine,
please fill out the form below.

To have this form automatically fill in for you, quickly register by clicking here.

First Name
Last Name
Company Name
Address1
Address2
City
State
Zip Code
Country
Phone Number
Fax Number
E-Mail Address
Please specify additional information needed
Contact Phone
Fax
E-Mail
Mail

 

Machinery Values Inc.
401 Supor Blvd.
Harrison, NJ 07029
Voice: (973) 497-7500
Fax: (973) 497-7501
e-mail:
sales@machineryvalues.com

If you have any problems accessing this site please e-mail:
webmaster@machineryvalues.com

© 2000 Machinery Values Inc. All rights reserved.