Taft Peirce #1, FINE FEEDS FOR BOTH CROSS & VERTICAL AXES SURFACE GRINDERS, HAND FEED

Price on Request

Make:: Taft Peirce

Model:: #1, FINE FEEDS FOR BOTH CROSS & VERTICAL AXES

Year:

Ref #:: 159650

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  5" X 12" TAFT PEIRCE MODEL #1 HIGH-PRECISION 
          HAND FEED SURFACE GRINDER
 
** FINE FEEDS FOR BOTH CROSS & VERTICAL AXES (.000050" GRADUATION)
 
** TILTING (30 DEGREES) WHEELHEAD DESIGN 
 
     WHEELS IN PHOTOS ARE NOT AVAILABLE 
 
  WIDTH& LENGTH GROUND ........................ 5" X 12" 
TABLE TO SPINDLE CENTER ....................... 12" 
LONGITUDINAL TABLE TRAVEL ..................... 13- 1/2"
TABLE MOVEMENT PER REV. OF HANDWHEEL .......... 3.4" 
CROSS TRAVEL .................................. 5- 1/2" 
GRINDING WHEEL CAPACITY ....................... 7" X 1/2" X 1-1/4" 
CROSSFEED MOVEMENT  PER REV. OF HANDWHEEL ..... 0.100"
CROSSFEED HANDWHEEL GRAD. ..................... 0.001"
CROSSFEED FINE FEED KNOB GRAD. ................ 0.00005" 
VERTICAL FEED PER REV. OF HANDWHEEL ........... 0.050"
STD. HANDWHEEL GRAD. .......................... 0.0005" 
FINE FEED KNOB GRAD. .......................... 0.00005"
 
APPROX. WEIGHT ................................ 1,500 LBS.
APPROX. DIMENSIONS ............................ 36" X 36" X 60"H
 
  MACHINE FEATURES:
CAST IRON, HEAVILY RIBBED CONTRUCTION W/SMALL FOOTPRINT
BALL MOUNTED TABLE, ROLLER MOUNTED SADDLE & BALL TRACKED 
  COLUMN, PLUS BALL BEARINGS THROUGHOUT, PROVIDE FOR
  EXTREMELY HIGH PRECISION CAPABILITY.
CROSSFEED HAS ANTI-BACKLASH NUT ASSEMBLY
SADDLE LOCK FOR CONENIENCE IN FORM GRINDING OPERATIONS
SADDLE IS SUPPORTED ON TWO HARDENED & GROUND FLAT STEEL WAYS
ENTIRE SPINDLE COLUMN MOVES FOR VERTICAL SPINDLE FEED
1 H.P. TAFT PEIRCE SUPER-PRECISION SPINDLE DRIVE 
AUTOMATIC LUBRICATION SYSTEM 
 
EQUIPPED WITH:
TILTING WHEELHEAD OPTION (30 DEGREES)- THIS FACILATATES
  GRINDING TO SHARP CORNERS  &SHOULDER AS WELL AS FINISHING
  OF SLOTS, DOVETAILS & UNDERCUTS WITH THE ANGULAR FACE
  OR PERIPHERY OF THE WHEEL.
FINE FEED KNOBS FOR BOTH CROSS & VERTICAL AXES (.00005" GRAD.)
5" X 12" WALKER CERAMAX FINE-DIVISION PERMANENT MAGNETIC CHUCK
"BIJUR" ONE-SHOT LUBRICATOR
3/60/220-440 VOLT MOTOR
 
 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCELLENT CONDITION & APPEARANCE ** 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.