Acer ATL 1740 CNC LATHES, FLAT BED (ENGINE LATHE STYLE)

$44,000

Make:: Acer

Model:: ATL 1740

Year:: NEW

Ref #:: 160104

Or call us for a quote at (973) 497-7500 or send us an email at toolroom@machineryvalues.com

NEW ACER ATL 1740 FLAT BED CNC TEACH LATHE
 
FEATURES:
2.16” (55mm) Spindle Bore with D1-6 Camlock Spindle Nose 
7.5HP Spindle Motor for 3 Phase 60 HZ Wiring
Hardened and Ground Meehanite Casting Bedway, Ground Gears, and Spindle
2 Speed Range:  L: 50 ~ 355 RPM / H: 352 ~ 2,500 RPM 
 “FAG0R” 8055 i/A-TC CNC Control
Constant Surface Speed
Manual – Teach – CNC Modes
Dual MPG Handwheel
C3 Ball Screw on X-Axis, C5 Ball Screw on Z-Axis & Laser Calibration on all Axes
 
CONTROL CAPABILITIES:
Use as a D.R.O. in Manual Mode 
Electric Handwheel for Semi-Auto Mode
Program in Teach Mode 
Program w/ Canned Cycles
Powerful CNC Full Auto Mode 
No Programming Experience Required
Conversational or G-Code Programming
Minimum Set-Up Time
 
SPECIFICATIONS:
Swing over bed: 17.32"
Center height: 8.66"
Swing over cross-slide: 9.45"
Distance between centers: 39.37"
Width of bed: 11.81"
Slideway surface hardness: HRC 48 deg.
Cutting Tool Max: 1"x1"
Spindle speed: L: 93~7500 RPM, H: 751~2600 RPM
Spindle range: 2 Ranges (Automatic)
Spinde nose: D1-6
Spindle nose taper: MT#6
Spindle bore: 2.1654"
Spindle Dia. Front bearing (taper roller): 4.92"
Number of bearing: 2
Bearing Class (Radial Run-Out) P5
Longitudinal travel (z axis): 39.37"
Z lead screw: 32mm xP5.0 C5
Z axis servo motor: 1.90 HP
Cross-slide travel (x axis): 11.02"
X lead screw: 20mm x P5.0 C5
X axis servo motor: 1.90HP
X/Z axis cutting feed rate: 196.85" per min
X/Z axis rapid traverse: 196.85"/393.7" per min
Tailstock quill diameter: 2.05"
Tailstock quill travel: 5.91"
Tailstock quill taper: MT #4
Spindle servo motor: 7.48 HP/10.47 HP 30 min
Coolant pump motor: 1/8 HP
Coolant tank: 20.34 gal
Lube pump: 0.5283 gal
Headstock oil capacity: 1.585 gal
Headstock lubrication: Oil Bath
Voltage: 200 to 240V
Phase: 3PH 60HZ
Amps at full load: 28.6A
Floor Dimensions: 57.01" x 55.12" x 75.20"
Shipping dimensions: 89.76" x 62.99" x83.07"
Machine weight (Net weight): 3,850 lbs.
Machine weight (gross weight): 4,180 lbs.
 
STANDARD ACCESSORIES:
Halogen Work Light
Tool Box w/Tools
Fully Enclosed Splash Guard
Coolant System
Automatic Lubrication System
Manual Tailstock
 
OPTIONAL ACCESSORIES:
10” 3-Jaw Independent Chuck (D1-6) w/ Direct Mount
12” 4-Jaw Independent Chuck (D1-6) w/ Direct Mount
Steady Rest w/ Rollers
Follow Rest
Face Plate 16”
ALORIS Tool Post & 4-Holder (#3-BS) 
ALORIS Tool Post & 6-Holder (#3-Set)
DORIAN Tool Post & 4-Holder
Four Way Tool Post
H4 Electric Tool Post 
Upgrade to 440V / 3-Phase Inverter Drive
   Program Training
 
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.