Watch Video:

Acer SUPRA 1428AHD, 1999, 3X AUTO FEEDS, PROG. AUTO IDF SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Acer

Model:: SUPRA 1428AHD, 1999, 3X AUTO FEEDS, PROG. AUTO IDF

Year:: 1999

Ref #:: 167643

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

          14" X 28" ACER "SUPRA" 
     HIGH PRECISION SERIES SURFACE GRINDER 
       W/PROGRAMMABLE ELECTRONIC DOWNFEED 
 
** UNUSUAL & DESIRABLE OPTION,
  - BALDOR ELECTRONIC VARIABLE SPEED CONTROL
  - 10 H.P. SPINDLE MOTOR !! **
 
MODEL: SUPRA-1428AHD    S/N: 99070624     NEW: 1999
 
TABLE SIZE ............................. 12" x 26"
MAX. GRINDING CAPACITY ................. 14" X 28"
DIST. FROM SPINDLE CENTER TO TABLE ..... 28- 5/16"
 
LONGITUDINAL TABLE TRAVEL, HYDRAULIC ... 28"
LONGITUDINAL TABLE TRAVEL, MANUAL ...... 29- 1/2"
CROSS TRAVEL, POWER .................... 13- 3/4" 
CROSS TRAVEL, MANUAL ................... 15" 
 
VARIABLE TABLE SPEED, HYDRAULIC ........ 16' TO 80' FPM 
AUTOMATIC CROSSFEED INCREMENT .......... 0.02" TO 0.5" 
RAPID CROSS TRAVERSE RATE .............. 47- 1/4" IPM 
CROSSFEED HANDWHEEL PER GRADUATION ..... 0.001" 
PER REVOLUTION ............. ........... 0.2" 
AUTO DOWN FEED INCREMENT (ROUGH)........ 0.00005" - 0.002"
AUTO DOWN FEED INCREMENT (FINE)......... 0.00005" - 0.00045"
RAPID VERTICAL POSITIONING RATE ........ 6" IPM
VERTICAL HANDWHEEL PER GRADUATION ...... 0.00005" 
PER REVOLUTION ............. ........... 0.05" 
SPINDLE MOTOR .......................... 7.5 H.P. 
STANDARD GRINDING WHEEL ................ 14"D x 2" x 5"
  
APPROX. WEIGHT ......................... 7,000 LBS. 
APPROX. DIMS. FOR SHIPPING ............. 87" x 77" x 88"H
APPROX. DIMS. FOR OPERATION ............ 110" x 78" x 81"H
 
  EQUIPPED WITH:
"LED" SCREEN DISPLAY FOR AUTO CYCLE CONTROLS
ELECTRONIC PROGRAMMABLE AUTOMATIC INCREMENTAL DOWNFEED
  CONTROL WITH MINIMUM INCREMENT 0.00005"
ROUGH & FINE FINE CYCLE OPTIONS FOR 
 PLUNGE & SURFACE GRINDING MODES.
DOWNFEED CYCLE FEED AMOUNT CAN BE ONE TURN OF THE 
  HANDWHEEL (.05" OR 9 TURNS OF THE HANDWHEEL, (0.45").
  THIS ALLOWS YOU TO DO "DEEP CUTS", A VERY NICE FEATURE.
SPARKOUT CYCLE (0 TO 9 PASSES) W/AUTO WHEEL RETRACTION
POWER RAPID WHEELHEAD POSITIONING 
HYDRAULIC TABLE TRAVERSE 
"TURCITE-B" ON "X" & "Y" AXES, INCREASES WAY LIFE
POWER CROSSFEED, DRIVEN BY BALL SCREW AND AC MOTOR,
 CONTROLLED ELECTRONICALLY
TURCITE-B FOR LONGITUDINAL & CROSS WAYS 
12" x 24" "O.S. WALKER "LBP" FINE-DIVISION ELECTRO-MAGNETIC CHUCK
O.S. WALKER "SMART SERIES" VARIABLE HOLD NEUTROFIER CONTROL  
COOLANT SYSTEM WITH BOTH PAPER FILTRATION & MAGNETIC SEPERATOR
OVER-THE-WHEEL DRESSER WITH MICROMETER ADJUSTMENT OF THE DIAMOND
10 H.P., 3/60/230-460 VOLT DIRECT DRIVE SPINDLE MOTOR,
 MADE BY "ADLEEPOWER", TYPE TC-1004, 1,725 RPM,
 29.8 AMPS WITH 230 VOLTS
"BALDOR" ELECTRONIC VARIABLE SPEED CONTROL, FOR INFINITELY
 VARIABLE SPINDLE SPEEDS
EXTERNAL HYDRAULIC SYSTEM
3/60/230-460 VOLT ELECTRICS 
MACHINE IS PRESENTLY WIRED FOR 230 VOLTS
 
 
SPECIAL NOTE:
"AS EQUIPPED" THIS MACHINE IS OVER 50K NEW !! 
 
LINK TO VIDEO: https://youtu.be/a7s8chO_LgE?si=ufpenXODhI4THLrs
 
** EXCELLENT CONDITION & APPEARANCE - ORIGINAL PAINT ** 
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
 
  

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.