Acra 3280SET NEW LATHES

Price on Request

Make:: Acra

Model:: 3280SET

Year:

Ref #:: 161985

Or call us for a quote at (973) 497-7500 or send us an email at toolroom@machineryvalues.com

NEW ACRA MODEL: 3280SET PRECISION GAP BED ENGINE LATHE
 
Acra’s 3280SET Precision Gap Bed Engine Lathes are made in Taiwan and features the following:
Headstock:
• All gears and mandrel are made of alloy steel with heat treatment and precision ground.
• Rotating type speed changing system is easy to operate.
Spindle:
• Large bore spindle, supported by 3-point precision bearings.
• Suitable for heavy-duty cutting.
Tailstock:
• With speed reduced quill suitable for heavy duty drilling, hand wheel is with dual dial..
Apron and Saddle:
• Easy-operated overload protect safety devise.
• Central lubrication system can be operated manually or automatically.
Gear Box:
• Universal gear box design, is able to cut metric thread, Imperial thread, module thread without changing gears.
Lathe Bed:
• High tensile ribs structure. high precision and wide bed surface.
• With hardened and precision ground.
• One piece structure lathe bed enhances the machines life and working performance.
Auto Longitudinal Stop:
• Auto longitudinal travel devise will control the feed of tool post.
Emergency Brake System:
• More safe emergency brake system can shut off power supply simultaneously.
 
 
Specifications:
Capacity: 32″/43″ x 80″
Swing Over Bed: 32-5/8″
Swing Over Cross Slide: 23-5/8″
Swing In Gap: 43″
Distance Between Centers: 80″
Bed Width: 18-1/8″
Headstock:
Spindle Nose: A2-11
Spindle Bore: 6″
Taper of Spindle: MT NO.5
Spindle Speeds – Steps: 12
Spindle Speeds – Range: 15 ~ 1,000 RPM
Carriage:
Cross Slide Travel: 16-1/2″
Compound Slide Travel: 10″
Threads & Feeds:
Inch Threads: 2 ~ 28 TPI
Metric Threads: 0.8 ~ 14 mm
Longitudinal Feeds: 0.05″ ~ 0.7 mm/rev
Cross Feeds: 0.025 ~ 0.35 mm/rev
Tailstock:
Quill Diameter: 3-3/4″
Quill Travel: 9″
Quill Taper: MT NO.5
Power:
Spindle Drive Motor: 25 HP x 4P
Voltage: 230V/460V AC / 3 PH
 
Standard Equipment:
1 PC    20” 3-Jaw Chuck
1 SET   Electromagnetic Brake
1 SET   2 Way Rapid Traverse Device
1 PC    Center Sleeve
2 PCS   Center (M.T.5#)
1 PC    Tool Post Wrench
1 SET   Anchor Bolt
1 SET   Tool Box & Tool
1 SET   Coolant System
1 PC    Halogen Light
1 PC    Full Length Splash Guard
1 SET Follow Rest
1 SET   Steady Rest 11.8″
1 PC    Full Length Rear Splash Guard
1 PC    4 Way Tool Holder
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.