Amada/Marvel SA460WPC Mitering Saw NEW HORIZONTAL BAND SAWS

Price on Request

Make:: Amada/Marvel

Model:: SA460WPC Mitering Saw

Year:: NEW

Ref #:: 163835

Or call us for a quote at (973) 497-7500 or send us an email at boringmills@machineryvalues.com

NEW Amada/Marvel Model: SA460WPC
Horizontal Mitering Saw
 
FEATURES
Hydraulic Down Feed
Feed rate and down pressure can be controlled for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
Hydraulic Shuttle Feed
Length settings of 0-27.56” (0-700mm) are accomplished with simple programming at the operator’s touch screen.  The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is + .005” per index. 
PC Programmable Control
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0-999.999” and the Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. 
Out-of-Stock Switch
The machine will shut off automatically when the material is no longer present in the rear vise jaws, allowing for truly automatic operation.
Full Stroking Hydraulic Vise Jaws
Hydraulic vices hold the work piece, providing accurate cuts and longer blade life. 
Shuttle Vise
The shuttle vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts. The remnant length is 9.5” (241 mm).
 
SPECIFICATIONS
Model SA460WPC
Cutting Capacity  
Round (Diameter) at 90°: 18″  460 mm
Round (Diameter) at 45°: 15″ 380 mm
Rectangle (W x H) at 90°: 24″ x 15″ 23″ Max x 18″ 610 x 380mm 580 Max x 460 mm
Square at 90°:  18″ x 18″ 460 x 460 mm
Rectangle (W x H) at 45°: 15″ x 15″ 380 x 380 mm
Work Load Capacity    
Blade Saw 
Blade Size (L x T x W): 18’10” x 0.050″ x 1-1/2″  5730 x 1.3 x 41 mm 
Blade Speed: 65-330 ft/min by Inverter 20-100 m/min by Inverter
Tension Control: Hydraulic 
Blade Control 
Top Limit Setting:  Manual Setting
Cutting Control: Hydraulic Flow Control Valve 
Vise Operation
Type:   Main and Rear Vise
Control:  Hydraulic Full-Stroke Cylinder
Motors
Saw Blade: 5 HP 3.7 kW
Hydraulic Pump: 1/2 HP 0.37 kW
Cutting Fluid Pump: 1/8 HP 0.06 kW
Power Requirement 
Power Supply Voltage: AC230V±10% or AC460V±10%, 3 PH, 60 Hz,
Required at Factory Voltage Setting 
Cutting Fluid Tank Capacity: 14.5 gal 55 liters
Tank Capacity: 4.0 gal 15 liters 
Pressure Setting    
Chip Disposal: Chip Conveyor 
Material Index
Index Mechanism: Shuttle Vise 
Stroke: 27.56″  700 mm 
Length: 0.5″-393.7″ 13-9999.9 mm
Number of Input Block/Station: 10
Number of Cut-Off Pieces: 1-999
Remnant Length: 11″ plus length of parts 280 mm plus length of parts
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.