Amada TECHSTER 64, 2013, FANUC 32i-B CNC CONTROL CNC SURFACE GRINDERS

Price on Request

Make:: Amada

Model:: TECHSTER 64, 2013, FANUC 32i-B CNC CONTROL

Year:: 2013

Ref #:: 167787

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

   
                 15.7" x 23.6" 
         AMADA "TECHSTER 64" CNC FORMING
       "HIGH PRECISION - HIGH PRODUCTIVITY"
         "SADDLE TYPE" SURFACE GRINDER 
 
                  NEW:  2013
 
 
 
SPECIFICATIONS:
TABLE WORKING SURFACE ....... 27" x 15.7"
MAX. LONGITUDINAL TRAVEL .... 30.7"
MAX. CROSS TRAVEL ........... 17.7"
SPINDLE CENTER TO TABLE ..... 19.6"
 
LONGITUDINAL TABLE SPEED .... 3.2' - 98' FPM
MAX. No. OF TABLE 
 MRECIPROCATIONS WITH
 0.59" STROKE ............... 150
 
CROSS/SADDLE FEED:
RAPID CROSS FEED, JOG (5).... 0 - 1300FT./MIN.
                              1,600 FT./MIN.
                              3,200 FT./MIN.
                              6,400 FT./MIN..
                              9,800 FT./MIN.
.
 HANDLE FEED, PER REV. ...... 0.0004", 0.004", 
                               0.04", 0.4"
 HANDLE FEED,PER GRAD. ...... 0.000004", 0.00004", 
                               0.0004", 0.0015"
MINIMUM FEED INCREMENT ...... 0.0000010"
POSITION DETECTION SYSTEM ... GLASS SCALE/0.05um
 
WHEELHEAD:
RAPID WHEELHEAD FEED (JOG) .. 3.9"/MIN. AND 39"/MIN.
 HANDLE FEED, PRE REV. ...... 0.0004", 0.004", 
                               0.04", 0.15"
HANDLE FEED,PER GRAD. ....... 0.000004", 0.00004", 
                               0.0004", 0.0015"
MINIMUM FEED INCREMENT ...... 0.0000010"
POSITION DETECTION SYSTEM ... LINEAR SCALE/0.05um
 
WHEEL SPINDLE:
SIZE (OD x WIDTH x BORE) .... 14" x 1.5 - 2"W x 5"B
WHEEL SPINDLE SPEED, 
  INF. VAR. ................. 1500 - 5,000 RPM
MOTOR ....................... 10 H.P.
 
FLOOR SPACE ................. 94" x 88" x 81"H
APPROX. MACHINE WEIGHT ...... 8,800 LBS.
 
 
MACHINE FEATURES & OPTIONS:
 
FANUC 32i-Model B CNC CONTROL
- SIMULTANEOUS 2-AXIS + 1 AXIS
- COLOR CRT GRAPHIC DISPLAY
- AXES DISPLAYED, X, Y & W
- EASY TO USE CONVERSATIONAL SOFTWARE
- FULL KEYPAD WITH G-CODE PROGRAMMING
- PATTERN GRINDING SOFTWARE
- CONTOUR GRINDING SOFTWARE
- PROFILE DRESS CANNED CYCLE OPTION
- FANUC MEMORY 80 METERS OPTION
- 50 WHEEL OFFSETS OPTION
 
- FULL ENCLOSURE OPTION
- MEASUREMENT SYSTEM OPTION (3 FACE TYPE)
- "DR. KAISER" ROTARY DIAMOND DISC DRESSER, 
   1,500 - 16K RPM, TWO ROTARY DISC TYPE,
   OPTION
- CREEP FEED OPTION 
- FANUC AC SERVO DRIVES
- BALSSCREWS ALL THREE AXES
- MPG HANDWHEELS LOCATED AT OPERATOR HIP LEVEL, 
   GREAT ERGONOMICS, FOR CROSS & TABLE AXES
 
15.7" x 23.6" FINE-POLE ELECTRO-PERMANENT 
  MAGNETIC CHUCK,  MADE BY "KANETEC" IN JAPAN 
  FOR AMADA WASINO.
  VERY LOW HEAT EMITTED, PERMITS FINER,
  SMALLER WORKPIECES TO BE HELD WITHOUT
  HEAT DISTORTION.  
VARIABLE HOLD NEUTROFIER CONTROL
 
COOLANT SYSTEM, AND COOLANT CHILLER UNIT OPTION
EXTRA GRINDING WHEEL HUBS
WORK LIGHT
10 H.P. AC MOTOR SPINDLE MOTOR.  THIS IS A HIGHER H.P. OPTION.
INVERTER, PROVIDING FOR INFINITLEY VARIABLE SPINDLE SPEEDS
MACHINE IS WIRED FOR 3/60/208 VOLTS
 
DESIGN ATTRIBUTES:
 
"Column—The unique, isolated three-way sliding 
 column on the Techster 64 and 64S was optimized
 through structural analysis to deliver maximum 
 performance while requiring minimal floor space."
 
"Table—The ball screw drive and no-overhang 
 V-V sliding surface deliver high-precision operation
 in both high- and low-speed use. The non-hydraulic 
 system is extremely environmentally friendly." 
 
"Bed and Saddle—The optimized rib layout 
 and high-rigidity bed structure 
 (with a low center of gravity) were developed
 through extensive structural analysis. 
 The massive bed and thick saddle support heavier
 workpieces with outstanding precision and flatness."
 
"Front-Side Operation—Axis movement can be 
 controlled from the front of the machine, 
 making column operations easy."
 
"Wheel Spindle—The Ø4.93" (100 mm) high-rigidity
 spindle with quill ensures highefficiency grinding."
 
"User-Friendly Control Panel—The spacesaving control 
 panel with Amada software improves overall efficiency." 
 
"TECHSTER 64 CONTROL FANUC 32 IB Three- axis control, 
 two-axis simultaneous Meister operating system. 
 Supports all canned cycles and G-code programming
 of the Meister series. Supports multiwork canned
 cycles and all dressing canned cycles. Supports 
 creep feed canned cycle, providing highprecision, 
 low-power creep feed." 
 
 
** SUPERIOR CONDITION - INSPECT UNDER POWER IN THE
   ORIGINAL OWNER'S SHOP, LOCATED IN UPPER MIDWEST **
 
** WOW!!  JUST BEAUTIFUL!!  **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.