Campbell FRUENTHAL VERTICAL UNIVERSAL GRINDERS

Price on Request

Make:
Campbell
Model:
FRUENTHAL
Year:
1986
Ref #:
146212

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com


Frauenthal/Rebuilt & Retrofitted by "Campbell"  in 1986
Vertical Spindle Internal  Grinder

Serial Number:  559A



SPECIFICATIONS:



52" T-SLOTTED FACE PLATE TYPE TABLE
58" MAXIMUM SWING
21" STROKE OF GRINDING HEAD ON RIGHT
12" TO 36" CLEARANCE OVER FACE PLATE
24" VERTICAL RAIL TRAVEL
BOTH SPINDLES CAN MOVE HORIZONTALLY ON
  THE RAIL, EACH HAVING 40" TRAVEL
TABLE SPEED IS 0 TO 90 RPM BY ELECTRONIC
  VARIABLE SPEED CONTROL
POWER RAPID TRAVERSE OF CROSS RAIL,  40" IPM



SPINDLE ON RIGHT:
15 H.P./230-460 VOLTS
BELT DRIVE, ELECTRONIC VARIABLE SPEED CONTROL
CURRENTLY HAS A 14 " DIAMETER GRINDING WHEEL
0 TO 45 DEGREE TILTING OF SPINDLE, LEFT & RIGHT
AUTOMATIC SPINDLE RECIPROCATION,
ALSO HAS A MANUAL HANDWHEEL FOR MANUALLY
  RECIPROCATING THE SPINDLE

SPINDLE ON THE LEFT:
SPINDLE ON RIGHT:
7.5 H.P./3500 RPM/1740 RPM/ONLY 440 VOLTS
DIRECT DRIVE, ELECTRONIC VARIABLE SPEED CONTROL
CAN USE EITHER 7" OR 10" DIAMETER GRINDING WHEELS
0 TO 45 DEGREE TILTING OF SPINDLE, LEFT & RIGHT
AUTOMATIC SPINDLE RECIPROCATION, WITH
RECIPROCATION RATE IS VARIABLE, FROM 0 TO 80-"
IPM,
  THROUGH ELECTRONIC SERVO MOTORS
ALSO HAS A MANUAL HANDWHEEL FOR MANUALLY
  RECIPROCATING THE SPINDLE


  TWO CAMPBELL "TWIN" IDENTICAL CONSOLE CONTROLS:
  DIGITAL DISPLAYS
  TOUCH KEY PADS
  INCH/METRIC INPUTS

TWO PENDANT CONTROLS:
  RAPID MOVEMENT, VERTICAL UP & DOWN, TABLE CCW
  & CW, HORIZONTAL "IN" & HORIZONTAL "OUT", DRESS
  ADVANCE & RETRACT, ANGLE ADVANCE & ANGLE RETRACT
  AC VARIABLE SPEED TABLE DRIVE MOTOR (0 TO 90 RPM)

"FUJI" ELECTRONIC AC VARIABLE SPEED DRIVE FOR THE
  GRINDING SPINDLE ON THE LEFT, LATER UPDATE THAN
  THE REBUILD/RETROFIT DATE OF 1986
TABLE DRIVE, 10 H.P./3/60/230-460 VOLT MOTOR
  WITH AC ELECTRONIC VARIABLE SPEED DRIVE
POWER RAIL CLAMPING
WAY COVERS

INFORMATION FOR CAMPBELL GRINDERS:

http://www.campbellgrinder.com

Phone: 231-798-6464

Email Parts and Service: parts@campbellgrinder.com <mailto:parts@campbellgrinder.com>



APPROXIMATE DIMENSIONS:
14' LEFT TO RIGHT FOR THE CROSS RAIL
BASE OF MACHINE IS 99" LEFT TO RIGHT
8' FRONT TO BACK
108" HEIGHT


*** F.O.B. OUR HARRISON, NJ WAREHOUSE ***


DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.

Similar Machines

We're here to help

Looking for a specific machine?

Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice: (973) 497-7500
Fax: (973) 497-7501
Email
sales@machineryvalues.com
Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice:
(973) 497-7500
Fax:
(973) 497-7501
image description

Buy on ebay

Shop now

Get Financing

Apply now