Chevalier FSG-2040ADII, 2001, PROG. AUTO IDF, 3X AUTO FEEDS SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Chevalier

Model:: FSG-2040ADII, 2001, PROG. AUTO IDF, 3X AUTO FEEDS

Year:: 2001

Ref #:: 167597

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

       20" x 40" CHEVALIER "COLUMN TYPE"
       3-AXIS AUTOMATIC SURFACE GRINDER
 WITH PROGRAMMABLE AUTOMATIC INCREMENTAL DOWNFEED
 
MODEL: FSG-20-40ADII    S/N: RB89B001     NEW: 2001
 
TABLE SIZE:...................... 19.7" X 39.4"
MAXIMUM TABLE LOAD .............. 2,579 LBS
MAX. DISTANCE FROM TABLE TO
 SPINDLE CENTERLINE ............. 28- 5/8"
POWER LONGITUDINAL TABLE SPEED .. 16' - 82' F.P.M.
MAX TABLE TRAVEL ................ 43 1/4"
MAX. CROSS TRAVEL OF COLUMN ..... 22"
AUTO CROSSFEED INCREMENTS ....... 1/8" - 1- 1/4"
POWER RAPID TRAVERSE RATE ....... 4.9' FPM
CROSSFEED, HANDWHEEL, PER REV. .. 0.2"
CROSSFEED, HANDWHEEL GRAD. ...... 0.001"
POWER RAPID TRAVERSE, VERTICAL .. 15.7" IPM
MPG LEAST INCREMENT ............. 0.0001"
GRINDING WHEEL SPINDLE SPEED .... 1,740 R.P.M.
WHEEL SIZE:...................... 14" x 2"W x 5" BORE
 
APPROX. FLOOR SPACE REQUIRED .... 152" x 118" x 110" H
APPROXIMATE WEIGHT .............. 13,600 LBS
 
MACHINE FEATURES:
-TRAVELLING COLUMN TYPE CONFIGURATION, WITH TABLE 
  SUPPORTED IN FULL TRAVEL TO AVOID OVERHANG.
-MICROPROCESSOR CONTROLLED
-SURFACE, CRISSCROSS, PLUNGE & SIDE GRINDING MODES
-MITSUBISHI SERVO DRIVE & MOTOR ON VERTICAL AXIS & CROSS 
  AXIS, WITH BALLSCREWS.
-LEAST INPUT INCREMENT IS 0.0001"
 
EQUIPPED WITH:
CONTROL PANEL WITH DIGITAL DISPLAY
MPG FOR VERTICAL AXIS
HANDWHEEL FOR CROSS AXIS MANUAL MOVEMENT
LUBRICATION TANK & PUMP
HYDRAULIC TANK
10 H.P. SPINDLE MOTOR
 
EQUIPPED WITH:
19.7" x 39.4" CHEVALIER "ELC-50100C" ELECTRO-MAGNETIC CHUCK
VARIABLE HOLD NEUTROFIER CONTROL, ON MACHINE CONSOLE
"SONY" 2-AXIS DIGITAL READOUT
POWER "OVER-THE-WHEEL" GRINDING WHEEL DRESSER
COOLANT TANK WITH PAPER FILTRAION
COOLANT GUARDING
"TORIT" "DRY-FLO" DUST COLLECTOR
LEVELLING PADS
WORK LIGHT
EXTRA GRINDING WHEELS
EXTRA GRINDING HUB
OPERATING MANUAL WITH ELECTRICAL SCHEMATICS
3/60/230-460 VOLT ELECTRICS
MACHINE IS PRESENTLY WIRED FOR 460 VOLTS
 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE ** 
** - ORIGINAL PAINT - TRULY SUPERIOR CONDITION & APPEARANCE  **
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.