Cincinnati-Milacron No. 2, MT, Power Workhead, Tilt Wheelhead, TOOL & CUTTER GRINDERS

Price on Request

Make:: Cincinnati-Milacron

Model:: No. 2, MT, Power Workhead, Tilt Wheelhead,

Year:: 1975

Ref #:: 179367

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

     #2 CINCINNATI-MILACRON 
 UNIVERSAL TOOL & CUTTER GRINDER 
 
         MODEL: MT     
     S/N: 1D2F-1ACF-136     
         NEW: 1975
 
CAPACITY:
SWING OVER TABLE DIAMETER ............. 10" 
LENGTH, BETWEEN R.H. & L.H. 
 TAILSTOCKS ........................... 27" 
LENGTH BETWEEN TAILSTOCK 
 AND WORKHEAD ......................... 21-1/2" 
FACE MILLS ON WORKHEAD DIAMETER ....... 10" 
FACE MILLS USING FACE MILL 
 GRINDING ATTACH. DIA. ................ 18" 
SAWS ON TABLE DIAMETER ................ 48" 
FORMED CUTTERS (USING 6" WHEEL) 
 DIAMETER ............................. 10" 
 
RANGE:
TABLE SIZE ............................ 6" x 36" 
LONGITUDINAL TABLE TRAVEL ............. 16" 
CROSS MOVEMENT OF TABLE ............... 10" 
TABLE SWIVEL .......................... 180° 
TABLE TAPER PER FOOT ON DIA. 
 (TOWARD & AWAY) ...................... 5" 
FINE ADJ. TAPER PER FT. 
 ON DIA. (TOWARD & AWAY) .............. 2" 
TABLE GRADUATIONS IN CENTER, 
 IN DEGREES ........................... 90° 
VERTICAL MOVEMENT OF GRINDING 
 WHEEL SPINDLE ........................ 10-1/2" 
MAX. DIST. CENTERLINE OF 
 SPINDLE TO TABLE ..................... 13-1/2" 
SPINDLE TILTS ABOVE
 AND BELOW CENTER ..................... 15° 
SWIVEL MOVEMENT OF GRINDING 
 WHEEL SPINDLE ........................ 360° 
 
SPINDLE SPEEDS:
6" WHEEL, SURFACE SPEED 
 6,022 FT./MIN. ....................... 3,834 RPM 
3" WHEEL, SURFACE SPEED
 5,887 FT./MIN. ....................... 6,425 RPM 
 
APPROXIMATE MACHINE WEIGHT ............ 3,000 LBS
APPROXIMATE DIMENSIONS ............ 36" x 38"D x 60H 
 
MACHINE FEATURES:
TILTING WHEELHEAD (15 DEG. ABOVE & BELOW) 
DUPLICATE CONTROLS @ THE FRONT & REAR OF THE TABLE 
BALL BEARING ANTI-FRICTION TABLE ROLLING IN 
REPLACEABLE HARDENED STEEL V-WAYS 
360 DEG. ECCENTRIC WHEELHEAD & SWIVEL TABLE WHICH 
CAN INCREASE SPECIFIED CROSS RANGE BY 70% 
CAST IRON CONSTRUCTION 
ONE-SHOT LUBRICATION SYSTEM 
2-SPEED SPINDLE, INSTANTLY REVERSIBLE 
1 HP 3/60/230-460 VOLT SPINDLE MOTOR 
 
EQUIPPED WITH:
CINCINNATI-MILACRON MOTORIZED WORKHEAD
- WORKHEAD IS WIRED DIRECTLY INTO THE MACHINE
- SELECTOR SWITCHES FOR THE MOTORIZED WORKHEAD
 
SPECIAL NOTE, IN STOCK, AVAILABLE TO PURCHASE:
CINCINNATI-MILACRON RADIUS ATTACHMENT, WITH WORKHEAD
CINCINNATI NON-MOTORIZED WORKHEAD
CINCINNATI TAILSTOCKS  
 
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** ORIGINAL PAINT - EXCELLENT CONDITION & APPEARANCE **
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.