Clausing B70RS NEW DRILL PRESSES

Price on Request

Make:: Clausing

Model:: B70RS

Year:: NEW

Ref #:: 148528

Or call us for a quote at (973) 497-7500 or send us an email at boringmills@machineryvalues.com

										NEW CLAUSING/IBARMIA GEARED-DRIVE ROUND-COLUMN DRILL 
 31.5" GEARED-HEAD, ELECTRICAL CLUTCH, FLOOR
  w/AUTOMATIC FEED REVERSING SYSTEM FOR TAPPING
 MODEL: B70RS
 
 
 
 SPECIFICATIONS:
 
 Spindle taper:  5MT
 Quill diameter:  3.54"
 Spindle travel (drilling depth):  10.24"
 Main motor power:  7.5 HP
 Coolant pump motor power:  .12 HP
 Number of speeds:  12
 Number of automatic feeds:  6
 Auto feed range: in/rev.  .0039/.0079/.0118/.0157/.0197/.0236
 
 
 STANDARD FEATURES & EQUIPMENT:
 
 -Maximum drilling capacity in steel:  2.75"
 -Maximum drilling capacity in cast iron:  3.15"
 -Maximum tapping capacity in steel:  2"
 -Maximum tapping capacity in cast iron:  2.36"
 -Automatic feed reversing system for tapping
 -Automatic feed and cut-off by electromagnetic clutch
 -Hardened and ground high quality steel gears
 -Speed plate and selecting levers on front of head
 -Gear box lubrication by automatic pump
 -Machine base with 2 T-slots, coolant tank and pump
 -Large worktable with 3 T-slots
 -Feed crank wheel for manual feed
 -Front hand wheel for fine feed work
 -Depth scale and adjustable depth stop
 -Automatic tool ejector
 -Work light
 -Built-in low voltage electrical equipment in machine head
 -Emergency STOP
 -Drill guard with microswitch
 
 
 DIMENSIONS:
 
 Height:  103.9"
 Base: length x width:  35.8" x 23.2"
 Base to spindle:  49.21"
 Spindle center to column:  15.75"
 Spindle to Table:
     Minimum:  3.15"
     Maximum:  25.98"
 Worktable: length x width:  23.6" x 27.6"
 Base height:  6.3"
 Column diameter:  8.66"
 
 
 OPTIONAL EQUIPMENT (CALL FOR PRICING):
 
 -Separate Tank Coolant System
 -Work Light--Magnetic Base
 -Cross Table 19.6" x 9.8"
 -Cross Table 27.5" x 9.8"
 -Cycle Start Foot Pedal
 -Foot Pedal For Reversing
 -Pitch Control Tapping w/Braking System*
 -Master Guide Spindle w/Nuts*
 -Master Guide Spindle w/Nuts Special Thread (inch etc.)*
 -Pneumatic Counter Balance w/Rapid Approach & Retract*
 -50% Lower Feed Range*
 -Mechanical Spot Face Device*
 -Pneumatic Counter Balance*
 -Union for Multi-Spindle Head*
 -Multi-Spindle Head Guide Rod*
 -Column Riser (8")*
 -Motor, 1200 RPM*
 -Motor, 3600 RPM*
 -Motor, 900/1800 RPM*
 -Motor, 1800/3600 RPM*
 
 *Factory Installed
 
 
 WARRANTY:
 
 Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not
 cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
 
 **Due to continual improvements, prices and specifications subject to change without notice**





									

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.