Clausing CL2000H NEW RADIAL DRILLS

Price on Request

Make:: Clausing

Model:: CL2000H

Year:: NEW

Ref #:: 149385

Or call us for a quote at (973) 497-7500 or send us an email at boringmills@machineryvalues.com

										NEW CLAUSING RADIAL DRILL
 78" ARM, 39 x 31 x 19 TABLE, 7.5 HP
 MODEL: CL2000H
 
 
 
 SPECIFICATIONS:
 
 WORKING AREA:
    Column Sleeve Dia.:       17"
     Column Face to Spindle Center:
                                  Maximum:     78.7"
                                  Minimum:     19.3"
     Spindle Head Travel:       59.4"
     Base Surface to Spindle End:
                                  Maximum:     74.8"
                                  Minimum:     19.7"
     Arm Vertical Travel:       43.3"
     Arm Rotation (Right & Left):    180 degrees
     Baseplate Working Surface:    55.3" x 38.6"
     Box Table Area:
                        Length:       39.3"
                        Width:       31.5"
                        Height:       19.7"
     Base Dimensions:
                        Floor Area:    114.5" x 43.3"
                        Height:       9.84"
 
 CAPACITIES:
    Drilling        In Steel       2.6"
                      In Cast Iron    2.75"
     Tapping     In Steel         1.97"
                      In Cast Iron    2.36"
    Boring        In Steel       5"
                 In Cast Iron    7.28"
 
 DRILLING HEAD:
    Spindle Taper:       5MT
     Spindle Stroke:       14.6"
     Quill Diameter       3.94"
     Number of Spindle Speeds:    12
     Spindle Speeds (rpm):    35-1890
     Number of Feeds:    6
     Spindle Feed Rate (in/rev.):    0.003-0.0038"
     Spindle Drive Motor:    7.5 hp
     Elevating Motor:    3 hp
     Clamping Motor:    1 hp
     Coolant Pump Motor:    1/8 hp
 
 OVERALL MEASUREMENTS:
    Maximum Machine Height:    124.8"
     Base & Column Height:       116.5"
     Shipping Dimensions (L x W x H):    122.2" x 55.1" x 127.5"
 
 
 STANDARD FEATURES & EQUIPMENT:
 
 -Equipped with hydraulic SEPARATE clamping unit.  Vertical movement of the arm is coordinated by an IC Timer. 
 With a single touch on the push button switch, you can have arm unclamped then move vertically, or stop then clamp
 automatically.  Very easy to operate and tools will always stay at the same point after tool shifting.
 -Gears are cooled by an oil pump to minimize gear wear.
 -Friction type disc clutch absorbs impact force caused by vertical movement of spindle and protects all transmission 
 units inside gear-box.  With quick spindle return, the clutch will help speed-up the tapping operation.
 -Special automatic tool eject device is supplied to allow you to change tools quickly (No drifter is required).
 -Special arm elevating device is provided to prevent arm from dropping abruptly after years of usage.
 -Coolant System
 -Tool kit and manuals
 
 
 OPTIONAL EQUIPMENT (CALL FOR PRICING):
 
 -Large Table, 32 x 28 x 24
 -Small Tilt Table, 20 x 20 x 23
 
 
 WARRANTY:
 
 Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not
 cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
 
 **Due to continual improvements, prices and specifications subject to change without notice**





									

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.