Haas VF2SSYT 5-Axis VERTICAL MACHINING CENTERS. VMC's

Price on Request

Make:: Haas

Model:: VF2SSYT 5-Axis

Year:: 2020

Ref #:: 178849

Or call us for a quote at (973) 497-7500 or send us an email at cncmachines@machineryvalues.com

 
HAAS VERTICAL MACHINING CENTER
MODEL: VF2SSYT, S/N: 1176767, NEW: 2020
 
SPECIFICATIONS:
TABLE SIZE ................. 36" x 18"
X-AXIS TRAVEL .............. 30" / 762mm
Y-AXIS TRAVEL .............. 20" / 508mm
Z-AXIS TRAVEL .............. 20" / 508mm
SPINDLE SPEED .............. 15,000 RPM
SPINDLE MOTOR .............. 30 HP
SPINDLE TAPER .............. CAT 40
TOOL CAPACITY (ATC) ........ 50
RAPID TRAVERSE - X AXIS .... 1,400 IPM
RAPID TRAVERSE - Y AXIS .... 1,400 IPM
RAPID TRAVERSE - Z-AXIS .... 1,400 IPM
CUTTING FEEDRATE ........... 833 IPM
APPROXIMATE WEIGHT ......... 8,000 LBS
 
EQUIPPED WITH: 
HAAS 5-AXIS CONTROL:
   MACROS, ROTATION & SCALING, RIGID TAPPING,
   M19 SPINDLE ORIENT, HIGH SPEED MACHINING, VPS EDITING 
   MAX MEMORY: 32 GB, WIRELESS NETWORKING
   DYNAMIC WORK OFFSETS & TOOL CENTER POINT CONTROL (DWO & TCPC)
HAAS TRT-160 TRUNNION TABLE (4TH & 5TH AXIS DRIVES + WIRING)
WIRELESS INTUITIVE PROBING SYSTEM (WIPS)
50 POSITION SIDE MOUNT AUTOMATIC TOOL CHANGER 
THROUGH SPINDLE COOLANT, 300 PSI 
CHIP AUGER 
HAAS MIST CONDENSER 
AUXILIARY COOLANT FILTRATION SYSTEM 
AUTOMATIC COOLANT REFILL 
HIGH INTENSITY LIGHTING 
AIR GUN 
REMOTE JOG HANDLE 
 
HOURS OF OPERATION AS OF OCTOBER 22, 2025: 
* POWER ON TIME: 6,777 HOURS 
* CYCLE START TIME: 1,139 HOURS 
* FEED CUTTING TIME: 771 HOURS
 
HISTORY: MACHINE WAS IN A SMALL SUPPORT SHOP FOR A PRIVATELY HELD PHARMACEUTICAL COMPANY, VERY LIGHT WORK.
 
REPLACEMENT COST FOR ABOVE HAAS VF-2SSYT AS EQUIPPED WITH TRT-160 TRUNNION TABLE: $220,000
 
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.