Watch Video:

Jones & Shipman 1310, 1968, I.D. SPINDLE, HYD. TABLE, AUTO INFEED, UNIVERSAL CYLINDRICAL GRINDERS

Price on Request

Make:: Jones & Shipman

Model:: 1310, 1968, I.D. SPINDLE, HYD. TABLE, AUTO INFEED,

Year:: 1968

Ref #:: 179196

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

                                                           
8" X 18" JONES & SHIPMAN "MADE IN ENGLAND"       
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER,
 WITH NICE ASSORTMENT OF ACCESSORIES 
              
                                                         
MODEL: 1310      S/N: BO53361       NEW: 1968
 
    
CAPACITY:                                                    
MAXIMUM SWING ....................... 8"   
DISTANCE BETWEEN CENTERS ............ 18"  
 
TABLE: 
LONGITUDINAL TABLE SPEED 
(HYDRAULIC) ......................... 3" TO 144" IPM  
MANUAL TRAVERSE, HANDWHEEL
 PER REV. ........................... 0.50"  
FINE HAND TRAVERSE KNOB GRAD. ....... 0.0005"  
FINE HAND TRAVERSE KNOB PER REV. .... 0.01"
TABLE SWIVEL INCLUDED ANGLE:                             
  CLOCKWISE ......................... 19 DEGREES  
  COUNTERCLOCKWISE .................. 20 DEGREES   
                                                         
WHEELHEAD:                                               
CROSS FEED HANDWHEEL GRAD. .......... 0.0002"  
ONE DEPRESSION OF FINE FEED
  LEVER KNOB ........................ 0.0001"  
AUTO INFEED @ TABLE REVERSALS ....... 0.0001" TO 0.0006"  
FEED @ REVERSAL OF TABLE,                                
  REDUCTION IN DIAMETER ............. 0.0002" TO .0012"  
CONTINUOUS (PLUNGE) INFEED RATE ..... 0.0001" TO .0006"  
(PLUNGE) REDUCTION IN DIA. FROM  .... 0.004" TO .072" IPM  
MAX. RANGE OF PLUNGE INFEED ... 0.8 REV. OF THE HANDWHEEL
WHEELHEAD SLIDE ADJUSTMENT .......... 7"    
SWIVEL OF WHEELHEAD (EIU TYPE)....... 360 DEGREES  
WHEEL SIZE .......................... 12" X 1" X 5"  
WHEEL SPEEDS (2) .................... 2,000 & 2,650 RPM  
WHEELHEAD MOTOR ..................... 2.0 HP  
 
WORKHEAD:                                                         
WORKHEAD SPINDLE SPEEDS (6) ......... 36 TO 500 RPM  
WORKHEAD SPINDLE TAPER .............. #3MT  
                                                         
APPROXIMATE DIMS. OF MACHINE ........ 66" X 48"
APPROX. FLOOR SPACE REQUIRED
 FOR OPERATION ...................... 80" X 54"  
APPROX. MACHINE WEIGHT .............. 4,000 LBS  
                                                         
EQUIPPED WITH:                                           
SWING AROUND INTERNAL GRINDING ATTACHMENT  
 WITH I.D. GRINDING SPINDLE 
COOLANT SYSTEM 
GRINDING WHEEL AND HUB ON MACHINE
(3) EXTRA GRINDING WHEELS, WITH HUBS
3-JAW CHUCK, ON FACE PLATE, WITH ADAPTOR
MAGNETIC CHUCK, ON BACK PLATE, WITH ADAPTOR
FACE PLATE, WITH ADAPTOR
6-JAW CHUCK, WITH ADAPTOR
3-POINT STEADY REST
2-POINT REST SUPPORT
CENTER IN WORKHEAD
TABLE MOUNTED DRESSER
JONES & SHIPMAN WHEEL BALNCING STAND
FACTORY CABINET, JONES & SHIPMAN "BLUE'
MACHINE IS WIRED FOR 3/60/220 VOLTS
                                        
MACHINE FEATURES:                      
- HYDRAULIC POWER TABLE TRAVERSE                             
- AUTO INFEED OF THE WHEEL, AT THE TABLE REVERSALS                                    
- PLUNGE (CONTINUOUS) INFEED                       
- FINE FEED MECHANISM FOR INFEED OF WHEELHEAD        
- FINE FEED KNOB FOR TABLE TRAVERSE                  
- DUAL LIVE/DEAD WORKHEAD SPINDLE                                      
 
 
 
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** EXCELLENT CONDITION & APPEARANCE **   

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.