Watch Video:

Landis 1R, S/N: 883-59, SWING DOWN I.D.,AUTO CYCLE UNIVERSAL CYLINDRICAL GRINDERS

Price on Request

Make:: Landis

Model:: 1R, S/N: 883-59, SWING DOWN I.D.,AUTO CYCLE

Year:: 1981

Ref #:: 169089

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

10" X 20" LANDIS (MADE IN USA) "HIGH-PRECISION"
  UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
 
MODEL: 1R     S/N: 883-59     NEW: 1981 
 
NOMINAL SWING OVER TABLE .................. 10" 
MAXIMUM SWING OVER TABLE .................. 10-7/8" 
NOMINAL DISTANCE BETWEEN CENTERS .......... 20" 
HYDRAULIC TABLE TRAVERSE .................. 2" TO 240" IPM 
TRAVERSE PER TURN OF HANDWHEEL ............ 0.200" 
TRAVERSE HANDWHEEL GRADUATIONS ............ 0.001" 
SWIVEL TABLE GRADUATED .................... 20°, 4" PER FT
  
WHEELHEAD:
WHEELHEAD SWIVELS L & R OF CENTER ......... 90°
WHEEL SIZE ................................ 12" DIAMETER 
MAXIMUM WIDTH, FULL WHEEL ................. 3" 
MAXIMUM HYDRAULIC INFEED - ON DIA. ... .... 0.090" 
RAPID INFEED STROKE ....................... 1" 
MINIMUM FEED GRADUATIONS - ON DIA. ........ 0.000050" 
WORK DIAMETER REDUCTION PER REV. OF 
 HANDWHEEL ................................ 0.100" 
WORK DIAMETER REDUCTION PER REV. OF 
 FINE FEED KNOB ........................... 0.001" 
WHEELHEAD MOTOR ........................... 5 HP 
 
WORKHEAD: 
WORKHEAD SWIVELS TOWARD WHEELHEAD ......... 90° 
WORKHEAD SWIVELS AWAY FROM WHEELHEAD ...... 30° 
WORKHEAD SPINDLE SPEEDS (6) ............... 60 TO 600 RPM 
WORKHEAD SPINDLE NOSE ..................... A2-5" 
WORKHEAD MOTOR ............................ 1/4 HP 
 
APPROXIMATE WEIGHT ........................ 4,150 LBS 
APPROXIMATE DIMENSIONS .................... 8'L X 4'W X 6'6"HT 
 
MACHINE FEATURES: 
DOUBLE SWIVEL UNIVERSAL WHEELHEAD DESIGN
UNIVERSAL WHEELHEAD AND UNIVERSAL WORKHEAD 
HYDRAULIC TABLE TRAVERSE
AUTO INFEED @ TABLE REVERSALS 
AUTO PLUNGE FEED 
POWER RAPID WHEELHEAD ADVANCE & RETRACTION 
SPARKOUT TIMER 
DUAL LIVE/DEAD SPINDLE HEADSTOCK 
HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS 
CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY LUBRICATED 
MACHINE MOTORS ARE 3/60/208-230-460 VOLT 
 
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT WITH I.D. SPINDLE
12" DIAMETER GRINDING WHEEL
EXTERNAL COOLANT TANK & PUMP
HARDINGE MODEL No. 5CA A25 "SJOGREN" SPEED TYPE COLLET CHUCK,
 FOR USING 5C COLLETS
MANUALS
MACHINE IS WIRED FOR 208 VOLTS, FLA 22.9
 
 Link to Video: https://youtu.be/-xS2N3cANr4?si=GTLcBpQR_Sp6J-Ca
** EXCEPTIONAL CONDITION 
& APPEARANCE - ORIGINAL PAINT **
** ORIGINAL FLAKING ON TOP OF TABLE!! WOW!! **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.