Landis TYPE 1R, 1975, SWING DOWN I.D., UNIVERSAL CYLINDRICAL GRINDERS

Price on Request

Make:: Landis

Model:: TYPE 1R, 1975, SWING DOWN I.D.,

Year:: 1975

Ref #:: 162217

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  10" X 20" LANDIS (MADE IN USA) "HIGH-PRECISION"
  UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
 
MODEL: 1R       S/N: 858-96      NEW: 1975 
 
NOMINAL SWING OVER TABLE ...................... 10" 
MAXIMUM SWING OVER TABLE ...................... 10-7/8" 
NOMINAL DISTANCE BETWEEN CENTERS .............. 20" 
 
HYDRAULIC TABLE TRAVERSE .................. 2" TO 240" IPM 
TRAVERSE PER TURN OF HANDWHEEL ................ 0.200" 
TRAVERSE HANDWHEEL GRADUATIONS ................ 0.001" 
SWIVEL TABLE GRADUATED ........................ 20 DEG.
 
WHEELHEAD: 
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG. 
WHEEL SIZE ................................ 12" DIAMETER 
MAXIMUM WIDTH, FULL WHEEL ..................... 2" 
MAXIMUM HYDRAULIC PLUNGE INFEED - ON DIA....... 0.090" 
RAPID INFEED STROKE ........................... 1" 
MINIMUM FEED GRADUATIONS - ON DIAMETER ........ 0.000050" 
WORK DIAMETER REDUCTION PER REVOLUTION OF 
HANDWHEEL ..................................... 0.100" 
WORK DIAMETER REDUCTION PER REVOLUTION OF 
FINE FEED KNOB ................................ 0.001" 
WHEELHEAD MOTOR ............................... 3 HP 
 
WORKHEAD: 
WORKHEAD SWIVELS TOWARD WHEELHEAD ............. 90 DEG.
WORKHEAD SWIVELS AWAY FROM WHEELHEAD .......... 30 DEG.
WORKHEAD SPINDLE SPEEDS (6) ............... 60 TO 600 RPM 
WORKHEAD SPINDLE NOSE ......................... A2-5" 
WORKHEAD MOTOR ................................ 1/4 HP 
 
APPROXIMATE WEIGHT ............................ 4,150 LBS 
APPROXIMATE DIMENSIONS .................... 8'L X 4'W X 6'6"HT 
 
MACHINE FEATURES:
UNIVERSAL WHEELHEAD AND UNIVERSAL WORKHEAD 
HYDRAULIC TABLE TRAVERSE
AUTO PLUNGE FEED 
POWER RAPID WHEELHEAD ADVANCE & RETRACTION 
SPARKOUT TIMER 
DUAL LIVE/DEAD SPINDLE HEADSTOCK 
HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS 
CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY LUBRICATED 
MACHINE MOTORS ARE 3/60/220-440 VOLT
 
EQUIPPED WITH, ACCESSORIES:
SWING DOWN I.D. GRINDING ATTACHMENT WITH SPINDLE
HARDINGE-SJORGREN 5C COLLET CHUCK
EXTERNAL COOLANT SYSTEM WITH TANK & PUMP
 
 
 
 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** ORIGINAL PAINT -  EXCELLENT CONDITION & APPEARANCE **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.