Mazak 30 OIL COUNTRY HOLLOW SPINDLE ENGINE LATHES

$79,500

Make:: Mazak

Model:: 30 OIL COUNTRY

Year:

Ref #:: 169288

Or call us for a quote at (973) 497-7500 or send us an email at toolroom@machineryvalues.com

30" X 120" MAZAK HOLLOW SPINDLE LATHE
MODEL: OIL COUNTRY,  S/N: 115W
 
SPECIFICATIONS:
MAX SWING OVER BED ........................ 30"
MAX SWING OVER CROSS SLIDE ................ 20-3/4"
HOLE THRU SPINDLE ......................... 12-1/2"
SPINDLE NOSE .............................. A2-20"
DISTANCE BETWEEN CENTERS .................. 120"
BED WIDTH ................................. 22"
CROSS SLIDE TRAVEL ........................ 21-1/4"
COMPOUND REST TRAVEL ...................... 9-7/8"
TAILSTOCK SPINDLE DIAMETER ................ 3-15/16"
TAILSTOCK SPINDLE TRAVEL .................. 11-13/16"
SIZE OF TAIL STOCK CENTER ................. #6 MT
SPINDLE SPEED RANGE (16) .................. 5 - 300 RPM
LONGITUDINAL FEED RANGE (40) .............. .0025 - .0356 IPR
CROSS FEED RANGE HALF OF LONGITUDINAL SETTING 
THREAD RANGE:
    INCH ................................. 1 TO 28 TPI
    METRIC ............................... 1 - 28 mm
    MODULE .............................. .5 - 7
     D.P. ................................ 4 - 56 
RAPID TRAVERSE RATE ....................... 96 IPM
APPROXIMATE WEIGHT ........................ 18,500 LBS
APPROXIMATE DIMENSIONS .................... 210"L X 62"W
 
EQUIPPED WITH:
FRONT & REAR 4-JAW CHUCKS
TAPER TURNING ATTACHMENT
ALORIS QUICK CHANGE TOOLPOST WITH HOLDERS
STEADY REST
SWIVEL COMPOUND
TWO SPEED TAILSTOCK
POWER RAPID TRAVERSE
PULL-OUT CHIP PANS w/ COOLANT SYSTEM
HARDENED AND GROUND BEDWAYS
20 HORSE POWER DRIVE MOTOR
 
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
 
 
  

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.