Watch Video:

Okamoto OGM-1236UNCB, FANUC 21iTB CNC, 2008 CNC UNIVERSAL CYLINDRICAL GRINDERS

Price on Request

Make:
Okamoto
Model:
OGM-1236UNCB, FANUC 21iTB CNC, 2008
Year:
2008
Ref #:
160801

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com


   12" X 36" OKAMOTO CNC UNIVERSAL CYLINDRICAL GRINDER
 
** I.D. ATTACHMENT IS AVAILABLE FROM OKAMOTO FOR THIS MACHINE **
 
** FANUC 21i-TB CNC Control - Two Axis Simultaneous Controlled **
 
Model: OGM-1236UNCB    S/N: 8093    New: 2008
 
 
 
Swing Over Table ..................... 12.6"
Distance Between Centers:............. 36"
 
Max. Table Travel .................... 50"
Power Table Traverse Speed ........... 0 to 400" IPM
Manual Pulse Generator ............... 0.00001", 0.0001", 0.001"
Table Feed Motor:..................... 1.2 HP AC Servo
Table Swivel Angle:................... 0 to 8.5 Degrees
 
Wheelhead, Total Stroke (X-axis) ..... 11.8"
Wheelhead Swivels .................... +/- 30 Degrees
Wheelhead Automatic Infeed ........... 0.00001" to 0.004"
Wheelhead Power rapid Stroke ......... 1.5"
Rapid Feedrate ....................... 400" IPM
Manual Pulse Generator ............... 0.00001", 0.0001", 0.001"
Wheelhead Feed Motor:................. 1.2 HP AC Servo
 
Grinding Wheel Size:.................. 14 x 1.5 x 5
Grinding Wheel Speed:................. 1770/2,000 RPM
Grinding Wheel Spindle Motor:......... 7.5 HP
 
 
Work Head Center Taper:............... MT #4
Work Head Spindle Bore:............... 0.7"
Work Head Spindle Motor:.............. 1 HP AC Servo
Work Head Spindle Speed:.............. 10 - 500 RPM
Work Head Swivel Angle:............... +30 Degrees/- 90 Degrees
 
Tailstock Taper:...................... MT #4
 
Machine Weight:....................... 9,250 lbs.
 
Equipped with:
Fanuc 21i-TB CNC Control
Two Axis Simultaneous CNC Control
CNC Programming, for Contouring, Multiple Diameters, & Dressing
Minimum Programmable Increment 0.00001"
Conversational or G and M Code Programming Std
Quick, Easy Set-up,Designed for Optimum Operator Convenience
RS232C Port
Fanuc Red Cap Servo Motors for the Axis Movements
Low Friction Material is Applied to the Sliding Surfaces
 of Slide Table & Wheel head.
Coolant System with Paper Filtration
Machine is Wired for 3/60/220 Volts
Comes with a Separate Transformer for Different Voltages
 
Special Note:
Swing Down I.D. Attachment & I.D. Spindle Can Be Purchased
 from Okamoto **
  
 
** "Runs Superbly.  Quiet Spindles and Ball Screws." **
 
 
** Exceptional Condition & Appearance - Original Paint **
** Presently Located in Western, MA **
** Arriving Soon to our Harrison, NJ Warehouse **
 
 
 
 
 
 
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.

Similar Machines

We're here to help

Looking for a specific machine?

Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice: (973) 497-7500
Fax: (973) 497-7501
Email
sales@machineryvalues.com
Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice:
(973) 497-7500
Fax:
(973) 497-7501
image description

Buy on ebay

Shop now

Get Financing

Apply now