8" X 20" OKAMOTO Model OGM-820UB
UNIVERSAL CYLINDRICAL GRINDER
** FANUC POWERMATE-G ELECTRONIC MDI CONTROL
WITH MULTI-DIAMETER GRINDING ABILITY **
S/N: 25056 New: 2003
"The OGM MDI Series Control
grinds 1, 2 or 3 different diameters in all cycles,
in any order - all in a single set-up.
"User friendly" with powerful teach function.
Data input is so simple .
Dress Interrupt Function, for on demand
wheel dressing at any point during the grind cycle.
The OGM will automatically stop its infeed, dress,
and return to the exact point where the interruption
occurred and resume grinding.
In addition, a Cycle Skip Function allows the operator
to skip the dress and roughing cycles and proceed
directly to finish grnd plus size compensation."
Choose from 4 versatile grinding cycles.
- (1) Plunge for rapid stock removal
- (2) Shift-Plunge / Traverse for fast stock removal and fine finish
- (3) Traverse with in feed at right end, left end or
both ends for fine finish
- (4) Manual Traverse that eliminates the need for program input
- saves time - ideal for single workpiece requirements"
The OGM' s Servo Driven Wheelhead is designed to
withstand the rigors of high volume production work,
yet deliver consistent fine finish capability to "tenths".
Its built-in rapid advance/ retract simplifies set-up
- a real convenience feature.
The wheelhead incorporates a cartridge type wheelspindle
(Iubed for life) that provides the utmost in reliability
and ease of maintenance.
Swing Over Table .............. 8.6"
Distance Between Centers:...... 19.68"
Max. Table Travel ............. 30"
Power Table Traverse Speed .... 0 to 160" IPM
Manual Pulse Generator ........ 0.00001", 0.0001", 0.001"
Table Feed Motor:.............. 1.0 H.P. AC Servo
Table Swivel .................. 0 – 9°
Wheelhead, Stroke (X-axis) .... 8"
Wheelhead Swivels ............. +/- 30°
Wheelhead Automatic Infeed .... 0.00001" to 0.002"
Wheelhead Power Rapid Stroke .. 1.5"
Rapid Feedrate ................ 160" IPM
Manual Pulse Generator ........ 0.00001", 0.0001", 0.001"
Wheelhead Feed Motor:.......... 1.2 HP AC Servo
Grinding Wheel Size:........... 12” x 1” x 5”
Max Wheel Width ............... 2"
Grinding Wheel Speed:.......... 2,000/2,240 RPM
Grinding Wheel Spindle Motor .. 5 HP
Work Head Center Taper:........ MT #3
Work Head Spindle Bore:........ 0.5"
Work Head Spindle Motor:....... 1 HP AC Servo
Work Head Spindle Speed:....... 15 - 600 RPM
Work Head Swivel Angle:........ +30 °/- 90°
Tailstock Taper:............... MT #3
Spindle stroke ................ 0.8”
Machine Weight:................ 6,200 lbs.
Approx. Floor Space ........... 80” x 69” x 66”H
Machine Features:
Fanuc "Powermate G" MDI Control
(See Description Above)
Manual Pulse Generator Handwheel
Fanuc Red Cap Servo Motors for the Axis Movements
Ball Screws (No Hydraulics)
Low Friction Material is Applied to the
Sliding Surfaces of Slide Table & Wheelhead
Automatic Lubrication System
Workhead Spindle is Both "Live" & "Dead"
Equipped with:
Machine is Wired for 3/60/220 Volts
Coolant System with Paper Filtration
** Excellent Condition & Appearance - Original Paint **
** Inspect Under Power in Longmont, CO **