Pressmaster CFP-150 HYDRAULIC C-FRAME PRESSES

$93,500

Make:: Pressmaster

Model:: CFP-150

Year:: NEW

Ref #:: 126572

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

 
150 TON PRESSMASTER HYDRAULIC C-FRAME PRESS
MODEL CFP-150T      *BRAND NEW DESIGN*
 
RATED CAPACITY .............................. 150 TONS
APPROACH SPEED .............................. 86 IPM
PRESSING SPEED .............................. 15 IPM
RETURN SPEED ................................ 102 IPM
TABLE WIDTH ................................. 34"
TABLE DEPTH ................................. 20"
U-SLOT WIDTH ................................ 4"
DAYLIGHT .................................... 20-1/2"
FULL STROKE ................................. 15"
THROAT ...................................... 13"
TABLE HEIGHT ................................ 34-1/2"
TOTAL DEPTH ................................. 58"
TOTAL HEIGHT ................................ 102"
TOTAL WIDTH ................................. 39"
UPPER PLATEN WIDTH .......................... 34"
UPPER PLATEN DEPTH .......................... 20"
MOTOR ....................................... 15 HP
AVAILABLE VOLTAGES ............ 230/460/575 / 3 PH / 60 Hz
 
STANDARD FEATURES: 
- PRESSURE GAUGE 
- PRESSURE REGULATOR
- ADJUSTABLE SPEED CONTROL 
- ADJUSTABLE STROKE CONTROL
- PRESSURE REVERSAL SWITCH 
- RAM TRAVEL IS GUIDED BY FOUR PRECISION-GROUND GUIDE RODS  
- JOG MODE USED FOR SIMPLIFYING SETUPS 
- DUAL CONTROL - YOUR CHOICE OF USING MOVABLE PEDESTAL C/W 
   DUAL ELECTRIC PALM BUTTONS WITH EXTRA EMERGENCY STOP OR FOOT PEDAL
- PROGRAMMABLE CONTROL SYSTEM (PLC)
- LOW SPEED BALDOR ELECTRIC MOTOR
- AIR COOLED INDUSTRIAL OIL COOLER
- ALL HYDRAULIC AND MECHANICAL PARTS ARE STANDARD IN THE INDUSTRY AND
   AVAILABLE THOUGHOUT NORTH AMERICA 
- ONE YEAR WARRANTY 
- MFG. IN NORTH AMERICA 
 
SHIPPING DIMENSIONS: 64" L X 58" W X 110" H 
APPROX. WEIGHT: 13,400
 
AVAILABLE OPTIONS:
- FULL LIGHT CURTAIN GUARDING AROUND THREE SIDES .............. $16,450
- T-SLOTTING .......... (PER LINEAR INCH) ..................... $    20

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.